• 제목/요약/키워드: Transportation Capacity

검색결과 820건 처리시간 0.034초

Marine Incidents Management and Information Exchange Technologies in the Process of Safe Ship Operation

  • Oleksiy, Melnyk;Yana, Volianska;Oleg, Onishchenko;Svitlana, Onyshchenko;Alla, Bondar;Andrii, Golovan;Nataliia, Cheredarchuk;Iryna, Honcharuk;Tetyana, Obnyavko
    • International Journal of Computer Science & Network Security
    • /
    • 제23권1호
    • /
    • pp.64-70
    • /
    • 2023
  • Maritime transport is dominant in the overall volume of all international transportation. Existence and overcoming of problems, which cause pressure on shipping safety, remain actual and fully concern both maritime and inland transport. Increasing speed and cargo capacity of the ships along with the reduction of crew members lead to the automation of a growing number of work processes, which indicates the need to actively introduce appropriate measures in the security system of sea-going ships and commercial ports and to develop modern approaches to minimize negative events and incidents in the process of ship operation. Advantages in use of modern methods of monitoring the safety of ship operations, management of possible events and incidents, including investigation of accidents, first, aimed at prevention of negative occurrences and ways of prevention on this basis. Considering statistics on incidents increase, this work presents analysis of general ship accident rate, study of major accidental events growth annually, and investigation of causes of incidents, which most frequently occur in port waters and at open sea. A survey of current approaches to ensuring the safety of shipping by implementing effective tools, such as event and incident management, has been conducted.

Multivariate Congestion Prediction using Stacked LSTM Autoencoder based Bidirectional LSTM Model

  • Vijayalakshmi, B;Thanga, Ramya S;Ramar, K
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권1호
    • /
    • pp.216-238
    • /
    • 2023
  • In intelligent transportation systems, traffic management is an important task. The accurate forecasting of traffic characteristics like flow, congestion, and density is still active research because of the non-linear nature and uncertainty of the spatiotemporal data. Inclement weather, such as rain and snow, and other special events such as holidays, accidents, and road closures have a significant impact on driving and the average speed of vehicles on the road, which lowers traffic capacity and causes congestion in a widespread manner. This work designs a model for multivariate short-term traffic congestion prediction using SLSTM_AE-BiLSTM. The proposed design consists of a Bidirectional Long Short Term Memory(BiLSTM) network to predict traffic flow value and a Convolutional Neural network (CNN) model for detecting the congestion status. This model uses spatial static temporal dynamic data. The stacked Long Short Term Memory Autoencoder (SLSTM AE) is used to encode the weather features into a reduced and more informative feature space. BiLSTM model is used to capture the features from the past and present traffic data simultaneously and also to identify the long-term dependencies. It uses the traffic data and encoded weather data to perform the traffic flow prediction. The CNN model is used to predict the recurring congestion status based on the predicted traffic flow value at a particular urban traffic network. In this work, a publicly available Caltrans PEMS dataset with traffic parameters is used. The proposed model generates the congestion prediction with an accuracy rate of 92.74% which is slightly better when compared with other deep learning models for congestion prediction.

수상운송로로서 한강의 이용가능성에 관한 연구 (On the Availability of Han river as Water Transport Route)

  • 최강일;노홍승;이철영
    • 한국항만학회지
    • /
    • 제7권2호
    • /
    • pp.37-60
    • /
    • 1993
  • Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

  • PDF

해머 쿠션 재질에 따른 모형말뚝의 소음, 에너지 전달효율 및 지지력 분석 (Model Tests on a Plastic Pipe Pile for the Analysis of Noise, Energy Transfer Effect and Bearing Capacity due to Hammer Cushion Materials)

  • 임유진;황광호;박영호;이진걸
    • 한국지반공학회논문집
    • /
    • 제22권12호
    • /
    • pp.33-43
    • /
    • 2006
  • 직항타공법에서 사용되는 해머 쿠션의 재질 차이가 항타시 주변 지반의 진동과 발생 소음 및 에너지 전달효율에 미치는 영향을 실내 모형시험을 통해 평가하였다. 항타 과정을 모사할 수 있는 모델 말뚝과 항타시스템 및 스트레인 게이지와 홉킨슨 바(Hopkinson bar)를 이용한 에너지 전달효율 측정장치를 제작, 구성하였다. 해머 쿠션 재질로는 상용의 해머 쿠션재인 Micarta 이외, 현장에서 다수 사용하는 Plywood, Polyurethane, Rubber(SBR), Silicone rubber 등의 5가지 재료를 선정하여 항타시험을 실시하였다 항타시험결과 쿠션 재료별 에너지 전달효율은 (1)Micarta, (2)Polyurethane, (3)Plywood, (4)Rubber(SBR), (5)Silicone rubber의 순이었다. 또한 에너지 전달효율이 높은 쿠션재료가 음압레벨의 평균치 또한 높은 비례관계를 보였다. 항타 종료후 말뚝 정재하시험을 실시하여 말뚝의 지지력과 축하중전이 특성을 비교, 분석한 결과 Micarta와 Polyurethane이 다른 쿠션재료에 비해 높은 지지력 값을 보였다.

Seismic holding behaviors of inclined shallow plate anchor embedded in submerged coarse-grained soils

  • Zhang, Nan;Wang, Hao;Ma, Shuqi;Su, Huaizhi;Han, Shaoyang
    • Geomechanics and Engineering
    • /
    • 제28권2호
    • /
    • pp.197-207
    • /
    • 2022
  • The seismic holding behaviors of plate anchor embedded into submerged coarse-grained soils were investigated considering different anchor inclinations. The limit equilibrium method and the Pseudo-Dynamic Approach (PDA) were employed to calculate the inertia force of the soils within the failure rupture. In addition, assuming the permeability of coarse-grained soils was sufficiently large, the coefficient of hydrodynamic force applied on the inclined plate anchor is obtained through adopting the exact potential flow theory. Therefore, the seismic holding resistance was calculated as the combination of the inertia force and the hydrodynamic force within the failure rupture. The failure rupture can be developed due to the uplift loads, which was assumed to be an arc of a circle perpendicular to the anchor and inclines at (π/4 - φ/2). Then, the derived analytical solutions were evaluated by comparing the static breakout factor Nγ to the published experimental and analytical results. The influences of soil and wave properties on the plate anchor holding behavior are reported. Finally, the dynamic anchor holding coefficients Nγd, were reported to illustrate the anchor holding behaviors. Results show that the soil accelerations in x and z directions were both nonlinear. The amplifications of soil accelerations were more severe at lower normalized frequencies (ωH/V) compared to higher normalized frequencies. The coefficient of hydrodynamic force, C, of the plate anchor was found to be almost constant with anchor inclinations. Finally, the seismic anchor holding coefficient oscillated with the oscillation of the inertia force on the plate anchor.

도심항공모빌리티(UAM)의 군사적 운용방안에 관한연구 (A Study on the Military Operation of Urban Air Mobility (UAM))

  • 서강일;박상혁
    • 문화기술의 융합
    • /
    • 제9권3호
    • /
    • pp.287-292
    • /
    • 2023
  • 미국 항공우주국(NASA)은 저고도의 공중을 새롭게 구축하고자 도시의 단거리 항공 운송 생태계를 새로운 개념의 도심항공모빌리티(Urban Air Mobility, UAM)을 제시하여 현재 UAM이라는 용어가 전 세계적으로 통용되고 있다. 이러한 패러다임은 우리나라 정부에서도 2025년까지 도심항공교통 서비스 상용화를 목표로 추진하고 있는 실정이며 더 나아가 급변하는 미래 작전환경 및 전장 공간의 확장으로 공중기동·수송능력 확보 필요성이 대두되고 있어 우리나라 군 조직에서도 필요성이 제기되는 부분이다. 즉, 본 연구는 미 공군의 'Agility Prime' 프로그램을 소개하여 군사적 필요성과 군사적 운용방안에 대해 제시하고자 출발한 연구이며 연구의 체계는 도심항공 모빌리티 배경 및 개념, 한국형 도심항공 모빌리티 발전 추세, 미 공군의 'Agility Prime' 프로그램 분석 순으로 구성하였으며 본 연구에 이어서 후속연구로 진행되길 기대한다.

비정형격자기반 도시침수해석모형 개발 (Development of Urban Flood Analysis Model Adopting the Unstructured Computational Grid)

  • 이창희;한건연;김지성
    • 대한토목학회논문집
    • /
    • 제26권5B호
    • /
    • pp.511-517
    • /
    • 2006
  • 홍수 피해는 인간에게 영향을 미치는 가장 중요하고 영향력 있는 자연재해 가운데 하나이다. 도시지역에서 국지적인 호우가 배수시스템의 용량을 초과할 경우 홍수피해가 발생된다. 도시지역에서 발생한 홍수는 도시산업과 교통 시스템을 마비시키며, 공공시설물에 막대한 피해를 야기시키다. 도시지역에서 이러한 피해를 줄이기 위해서는 도시지역의 복잡한 지형과 인위적인 배수시스템을 동시에 고려하기에 적합한 모형이 필요하다. 본 연구에서는 도시홍수의 침수범위, 침수심과 같은 홍수특성을 모의하기 위한 비정형격자기반 도시침수해석모형을 개발하였고, 이를 배수 시스템과 연계하였다. 본 연구를 통해 홍수 위험지역을 계산하고, 홍수대비지도를 만드는데 활용될 수 있다. 또한, 홍수담당기관의 의사지원시스템의 한 부분으로 활용되어 침수경감대책수립에 이용될 수 있다.

The responses of battered pile to tunnelling at different depths relative to the pile length

  • Mukhtiar Ali Soomro;Naeem Mangi;Dildar Ali Mangnejo;Zongyu Zhang
    • Geomechanics and Engineering
    • /
    • 제35권6호
    • /
    • pp.603-615
    • /
    • 2023
  • Population growth and urbanization prompted engineers to propose more sophisticated and efficient transportation methods, such as underground transit systems. However, due to limited urban space, it is necessary to construct these tunnels in close proximity to existing infrastructure like high-rise buildings and bridges. Battered piles have been widely used for their higher stiffness and bearing capacity compared to vertical piles, making them effective in resisting lateral loads from winds, soil pressures, and impacts. Considerable prior research has been concerned with understanding the vertical pile response to tunnel excavation. However, the three-dimensional effects of tunnelling on adjacent battered piled foundations are still not investigated. This study investigates the response of a single battered pile to tunnelling at three critical depths along the pile: near the pile shaft (S), next to the pile (T), and below the pile toe (B). An advanced hypoplastic model capable of capturing small strain stiffness is used to simulate clay behaviour. The computed results reveal that settlement and load transfer mechanisms along the battered pile, resulting from tunnelling, depend significantly on the tunnel's location relative the length of the pile. The largest settlement of the battered pile occurs in the case of T. Conversely, the greatest pile head deflection is caused by tunnelling near the pile shaft. The battered pile experiences "dragload" due to negative skin friction mobilization resulting from tunnel excavation in the case of S. The battered pile is susceptible to induced bending moments when tunnelling occurs near the pile shaft S whereas the magnitude of induced bending moment is minimal in the case of B.

실시간 신호제어를 위한 신경망 적용 지체최소화 주기길이 설계모형 개발 (Development of Neural Network Based Cycle Length Design Model Minimizing Delay for Traffic Responsive Control)

  • 이정윤;김진태;장명순
    • 대한교통학회지
    • /
    • 제22권3호
    • /
    • pp.145-157
    • /
    • 2004
  • 국내 실시간 신호제어시스템은 주요교차로의 검지체계에서 산출되는 포화도 정보 및 실시간 신호운영자료를 토대로 차기 주기길이를 설계하고 있다. 이러한 국내 실시간 신호제어시스템의 주기길이 설계모형에 의해 설계되는 차기주기길이는 교통량이 증가하면 주기길이도 증가한다는 주기길이 결정 기본원리를 따르고 있으나 해당 주기길이 설계모형으로 결정되는 주기길이가 과연 지체최소화 주기인지 검토가 요구된다. 또한 국내 실시간 신호제어시스템의 주기길이 설계모형에는 운영자 결정 변수가 있어 차기 주기길이 설계가 비효율적일 수 있으므로 운영자 결정 변수를 제외한 주기길이 설계모형 개발이 필요하다. 이에 본 연구에서는 (1)국내 실시간 신호제어시스템의 주기길이 설계모형을 검토하고, (2)운영자 결정변수를 제외한 주기길이 설계모형을 개발한다. 국내 실시간신호제어시스템의 주기길이 설계모형을 검토한 결과 (1)교차로의 운영상태가 비포화일 경우 지체최소화 주기보다 큰 주기길이를 설계하는 것으로 검토되었고, (2)교차로의 현재 신호주기가 90초 이상일 경우 목적 운영포화도(Target operational volume-to-capacity ratio)가 0.90을 유지하는 반면 신호주기가 90초 미만일 경우 목적운영포화도가 0.90보다 작아지는 것으로 검토되었다. 본 연구는 이러한 점을 고려, 신경망을 이용하여 운영자 결정변수를 제외한 국내 실시간 신호제어시스템을 위한 지체 최소화 주기길이 설계 모형을 개발하였다. 모형 검증결과 본 연구에서 개발된 신경망 모형은 국내 실시간 신호 제어시스템과는 달리 지체최소화 주기길이와 유사한 패턴으로 주기길이를 설계한다는 결과를 도출하였다.택배서비스시장도 성장한 것으로 나타났다. 특히 정부주도에 의한 정보화추진이 전자상거래를 촉진시켜 택배서비스시장에 영향을 미친 것으로 분석되었다.수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수

중공비율에 따른 중공 프리캐스트 철근콘크리트 기둥의 압축거동 (Compressive Behavior of Precast Concrete Column with Hollow Corresponding to Hollow Ratio)

  • 이승준;서수연;배문용;김강수
    • 콘크리트학회논문집
    • /
    • 제26권4호
    • /
    • pp.441-448
    • /
    • 2014
  • 최근 일련의 연구로부터, 중공이 있는 프리캐스트 콘크리트(hollewed precast concrete, HPC) 기둥를 사용할 경우, 일반적인 PC기둥에 비하여 접합부 콘크리트를 충실하게 채울수 있으며 이에 따라, 접합부의 고정도는 일체식 철근콘크리트(RC)와 같이 향상될 수 있음이 확인되었다. 그러나 충전콘크리트로 중공부가 채워진 후, HPC부재와 충전콘크리트의 강도가 서로 다르고 이 두 부재 사이에는 접촉면이 있음에 따라 합성구조와 같은 거동을 보이게 되며 이는 합성된 기둥의 구조적 거동과 강도에 영향을 미치게 된다. 이 논문에서는 HPC 기둥에서 중공의 크기와 중공부분 콘크리트의 채움 유무에 따른 기둥의 압축강도 시험을 실시하였다. 중공의 비율은 35, 50 그리고 59%이며 실험체의 양단을 단순지지 형태로서 지지한 뒤 중심압축력을 기둥의 상단에 작용시켰다. 또한 압축에 대한 HPC 기둥의 파괴거동을 묘사하기 위하여 유한요소 해석을 실시하였다. 실험 결과, 중공내부가 충전콘크리트로 채워진 기둥에서, PC와 충전콘크리트의 강도차이와 상관없이 중공률은 기둥의 초기강성에 영향을 미치지 않는 것으로 나타났다. 그러나 기둥의 압축강도는 중공률에 반비례하는 것으로 나타났다. 충전콘크리트가 채워지지 않은 HPC기둥의 구조성능은 중공의 직경에 밀접하게 관련이 있는 것으로 나타났으며, 특히, HPC의 두께가 지나치게 얇은 경우에는 국부적인 파괴가 전체 파괴를 지배하는 것으로 나타났다. 이러한 영향을 고려하여 HPC기둥의 압축내력을 산정할 수 있는 식을 제시하였다. 유한요소해석에서는, HPC와 충전콘크리트 사이의 접촉면을 고려할 경우, 해석 결과가 실험 결과와 좋은 대응을 보이는 것으로 나타났다.