• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.263-267
• /
• 2007

This study proposes a new methodology to estimate the traffic capacity of a personal rapid transit(PRT) system. The proposed method comprises three steps. The first step models the guideway network(GN) of PRT as a digraph, where its node and link represent a station and a one-way guideway link between two stations, respectively. Given local vehicle control strategies, the second step formulates the local traffic capacities through the nodes and links of the GN model. The third step estimates the worst-case local traffic demands based on a shortest-path routing algorithm and an empty vehicle allocation algorithm. By comparing the traffic estimates to the local traffic capacities, we can determine the feasibility of the given GN in traffic capacity.

• 한국농공학회지
• /
• 제44권7호
• /
• pp.36-45
• /
• 2002

Most of rural bridges have passed 30 years of age since they were built, which have to support unexpected overload caused by changed design load and excessive amount of transportation. For these rural bridges, repairs and replacements are needed. Even though there have been attempt to estimate the safety of existing bridges deteriorated with major defects, those approaches must rely on the observable damage and subsequent decisions are made subjectively. To avoid the high cost of rehabilitation, the bridge rating must correctly represent the present load-carrying capacity. Rating engineers use a methods such as Allowable Stress Design (ASD), Load Factor Design (LFD), and Load Resistance Factor Design (LRFD) to evaluate the bridge load carrying capacity. In this paper, the load rating methods are introduced, and it is illustrated how to use the load test data from literature survey. Load test is conducted to the bridge that was built 30 years ago in rural area. From load test results, new maintenance method is suggested instead of the bridge replacement.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.835-840
• /
• 2016

In this study, the electrostatic capacity and dielectric loss tangent for $20{\mu}m$ thick thermal conductivity silicone rubber which is heated at 80 degrees for 8 hours has been measured at temperature of $30^{\circ}C{\sim}170^{\circ}C$, frequency of 0.1~1 MHz. The results of degradation evaluation by this study are as follows. In low frequency, it found that the electrostatic capacity decreased with increasing temperature. On the other hand, it confirmed that the range of the electrostatic capacity narrowed with increasing frequency. It confirmed that there are the carboxylic acid structure and C-O bonding at range of wave number 1,000cm-1 to 1,300cm-1.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.309-321
• /
• 2024

In this paper, the effect of semi-rigid connections on the stability bearing capacity of cross-bracings in steel tubular transmission towers is investigated. Herein, a prediction method based on the hybrid model which is a combination of particle swarm optimization (PSO) and backpropagation neural network (BPNN) is proposed to accurately predict the stability bearing capacity of cross-bracings with semi-rigid connections and to efficiently conduct its probabilistic assessment. Firstly, the establishment of the finite element (FE) model of cross-bracings with semi-rigid connections is developed on the basis of the development of the mechanical model. Then, a dataset of 7425 samples generated by the FE model is used to train and test the PSO-BPNN model, and the accuracy of the proposed method is evaluated. Finally, the probabilistic assessment for the stability bearing capacity of cross-bracings with semi-rigid connections is conducted based on the proposed method and the Monte Carlo simulation, in which the geometric and material properties including the outer diameter and thickness of cross-sections and the yield strength of steel are considered as random variables. The results indicate that the proposed method based on the PSO-BPNN model has high accuracy in predicting the stability bearing capacity of cross-bracings with semi-rigid connections. Meanwhile, the semi-rigid connections could enhance the stability bearing capacity of cross-bracings and the reliability of cross-bracings would significantly increase after considering semi-rigid connections.

• 정보처리학회논문지D
• /
• 제18D권5호
• /
• pp.371-384
• /
• 2011

본 논문은 운송비용과 탄소배출비용을 고려한 최적 운송수단 선정에 대한 물류의사결정 시스템을 설계하고자 한다. 기존 연구는 운송비용과 운송모드별 용량을 고려하여 최적의 운송수단을 선정하였으나, 온실가스 배출규제에 대응하기 위해 운송비용과 용량 뿐만 아니라 탄소배출비용을 통합적으로 고려하여 물류체계를 설계할 필요성이 높아지고 있다. 따라서 본 논문에서는 탄소배출을 고려한 우리나라의 복합운송에 대한 운송수단 선택과 비용과 CO2배출의 Trade-off관계에 대한 접점을 찾아 분석하고 향후 나아갈 방안에 대해 제시하고자 한다. 탄소배출비용을 고려한 최적 운송수단 의사결정 문제는 혼합정수계획 모형으로 모델링되었으며, 운송비용과 탄소배출비용 사이의 관계를 분석하기 위하여 서울-부산 간 컨테이너 운송에 있어서의 다양한 시나리오를 도출하였다. 각각의 시나리오는 개발된 의사결정 시스템을 통하여 분석되었으며, 분석결과 단위 이동 거리당 탄소배출량이 낮은 것으로 알려져 있는 해상운송과 같은 대량운송 수단이 경우에 따라 더 많은 탄소를 배출하는 것으로 나타났다. 대량운송 수단의 경우 항만이나 철도역까지의 트럭운송에서의 우회가 증가된 탄소 배출의 주요 원인이었다. 제안된 물류의사결정 시스템은 녹색물류 및 그린SCM에서의 탄소배출비용과 물류비용사이의 관계를 이해하는데 역할을 할 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제17권5호
• /
• pp.14-28
• /
• 2018

차량 통신 및 지능형 교통 시스템의 기술 향상으로 인해 자율 차량이 시장에 서서히 도입될 것으로 예상된다. 본 연구는 자율주행차량이 네트워크 효율성에 미치는 영향을 분석한 것이다. 네트워크의 효율성을 측정하기 위해 이 연구에서는 미시적 및 거시적 시뮬레이션을 결합한 순차적 단계를 적용했다. 미시적 시뮬레이션은 도로에서 자율주행차량의 비율에 의한 용량 변화를 고려하는 반면, 거시적 시뮬레이션은 네트워크 전체의 개선을 식별하기 위해 시뮬레이션 결과를 이용한다. 예상대로, 자율주행차량은 인간의 운전보다 기존 도로 용량을 효율적으로 활용한다. 특히, 고속도로에서 최대 용량 개선은 190.5%로 예상된다. 상당한 용량의 변화는 자율주행차량의 비율이 약 80% 이상일 때 관찰된다. 이러한 개선 사항은 자율주행차량의 보급을 통해 전반적인 네트워크 효율성을 향상시킬 수 있는 거시적 모델로 변환된다. 그러나 본 연구는 자율 주행 차량의 시장 첫 출연이 자유로운 흐름 조건을 보장하지 않는 다는 것을 확인하며, 이는 자율주행차량 시대에 맞는 시스템 최적의 경로 체계의 가능한 필요성을 의미한다.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• 대한토목학회논문집
• /
• 제30권5D호
• /
• pp.477-483
• /
• 2010

기존 대중교통시스템은 한정된 수송용량, 포화상태인 도로 교통체계 등으로 인해 새로운 교통수단이 발전할 수 있는 단초를 제공하였으나, 교통당국에서는 기존의 도시철도의 규모를 축소시킨 경량 전철 위주로 신교통시스템의 도입을 추진하고 있다. 특히 각 도시별로 대중교통(버스 또는 도시철도)을 계획할 때 특별한 대중교통시스템 선정기준이 없어 해당 지자체별로 어려움을 겪고 있어, 대중교통축별로 어떠한 대중교통시스템이 적정한지를 판단할 수 있는 선정 기준이 필요하다는 목소리가 높아지고 있는 실정이다. 이에 따라 도시의 교통축별로 GIS Buffering 분석기법에 기반한 대중교통수요 예측모형을 개발하고, 대중교통시스템별 용량을 설정하여 교통축별 최적의 대중교통시스템을 선정하고자 하였으며, 대중교통이 운행하는 대중교통축별로 수요를 처리할 수 있는 적정 대중교통시스템을 선정하는 것이 가장 중요하므로, 선정 및 평가에 대해 필요조건과 충분조건으로 구분한 방법론을 제시하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.727-733
• /
• 1993

An attempt was made to mechanize the infield transportation system in a cocoa plantation. A small trailer was designed and fabricated and used with a commercial 2-wheeled walking tractor modified into a 4-wheeled tractor-trailer unit to suit the plantation conditions. The transporter had a capacity of 800 kg and could be loaded with about 1000 cocoa pods at a time and was well within the towing capability of a 10 hp tractor. Time and motion studies were conducted on a 30 acre, 6 year old cocoa plantation intercropped with coconut to compare manual and the tractor-trailer combination in relation to infield transportation. The total time taken to harvest 80 trees manually was computed to be 24 manuhours per hectare whilst the tractor-trailer combination required 18manhours.

• 전기학회논문지P
• /
• 제67권1호
• /
• pp.37-41
• /
• 2018

In this paper, the ESS(Energy Storage System) is interconnected in order to reduce the maximum load in the distribution system and the target location of the ESS is set to be close to the rated voltage. We also applied the weights to nodes with large capacity and number of customers in the system. In the future, the interconnected location of the ESS was determined until 2029 in consideration of the load increase rated of the system. We propose a cooperative decision algorithm of interconnected location of ESS for Power Distribution System.