• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.108-116
• /
• 1995

A tension control strategy for a multi-span web transport system is proposed. This strategy is developed by using the tension transfer phenomena in multi-span systems. The performance of this control strategy is compared with that of an existing control strategy through a computer simulation. A real-time software is designed based on the proposed tension control stration of master speed drive in tension control is demonstrated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.775-789
• /
• 2011

Centering on KTX stations, Korea is implementing specialized development of metropolitan business zones nationwide and is in the process of building the transfer link system of transportation in order to actualize intermodalism nationwide. Daejeon station, hub of high-speed railway requires the effective transportation transfer system considering Daejeon station area reorganization plan and opening of second phase high-speed railway. Based on the analysis of the possibility and validity of building a transit center under the Transportation System Efficiency Act, it is necessary to make a mutual benefit in a regional development by installing the resonable transfer system between railway and other transportation services. Through analysis of current situations and technical, economic and environmental feasibility evaluation, design plan of effective transportation transfer system in Daejeon station is proposed.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.63-70
• /
• 1998

According to the stringent exhaust emission regulation control of air fuel ratio is one of the most important issues on gasoline engine. Although many researches have been carried out to identify the fuel transport phenomena in a port fueled gasoline engine, complexity of fuel film behavior in the intake port makes it difficult. The fuel film behavior was investigated recently by using visualization method and these gave us qualitative understanding. In this paper, the quantitative measurement method for the port fuel film is studied by using Fast Response Flame Ionization Detector(FRFID). The mass of fuel film on the port wall was measured by using the methods of fuel injection off, injection on and regression. The Fuel film mass was increased with incresing load at the same engine speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.235-238
• /
• 2006

For high-speed aircraft and high-speed civil transport planes, certain structural skin components are subjected to very large acoustic loads in an elevated thermal environment. In this study, we used the single-mode Fokker-Panck distribution to predict displacements of isotropic plates subject to thermo-acoustic combined load. The single mode was formulated to predict the nonlinear dynamic responses of postbuckled plates under acoustic random excitation. Acoustic random excitation was used with Gauss distribution. Some important effects of the snap-through motion on the dynamic responses of the postbuckled plates are described.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.46-51
• /
• 2008

Honeycomb panel has a constructive advantage because it is constructed with a honeycomb core, so it has relatively higher strength ratio to weight. Therefore honeycomb panel has been used as the light weight panels in the high-speed railway technology and high-speed ship like as cruise yachts. Also it has been used in the aircraft and aerospace industry as a structural panel because light weight structure is indispensible in that field of industry. Recently, the honeycomb panel is embossed in the viewpoints of high oil prices as the lightweight panel of the transport machine, however the sound insulation capacity of the honeycomb panel is poorer than those of uniform and another sandwich panels. In this paper a method to improving the sound absorption coefficient of a honeycomb panel Is studied by using the Helmholtz resonator. The sound absorption coefficients for some kinds of honeycomb cores are demonstrated by the normal incident absorption coefficient method.

• 한국표면공학회지
• /
• 제28권4호
• /
• pp.199-206
• /
• 1995

A kinetic study on the electrodeposition of Ni-Zn-P ternary alloys onto a steel in chloride solutions was carried out using a rotating disc electrode. The coatings were characterized using SEM/EPMA and A. A. analysis. The results showed that the plating rates of three components were increased with applied potential, disc rotating speed and temperature. The activation energies of Ni, Zn and P of the coatings were 6.1, 5.1 and 8.0 kcal/mole respectively. Therefore, the deposition rates were controlled partly by surface electrochemical reaction and partly by mass transport. As the potential, temperature of bath and rotating speed of cathode disc were raised, the vol. % ratios of Ni and P of coating layer were increased but that of Zn decreased. The effect of coating parameters on the surface morphology was also examined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.539-544
• /
• 1997

Although the identification of a moving noise source is important in reducing the source power of the transport systems such as airplane or high speed train, the direct measurement of the frequency characteristics is usually difficult due to wind noise when using a microphone running with that noise source. On the other hand the motion of a source causes the frequency characteristics of the pass-by sound measured at a fixed point to be distorted that it is quite difficult to identify the original source characteristics. In this study the relationship between the spectra of the source and the pass-by sound signal is analyzed for a source moving at a constant velocity. The effects of the speed and the frequency characteristics of the source on the pass-by noise spectrum are investigated through numerical simulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2021-2026
• /
• 2008

Recently, a high speed rail consists of many train coaches and power cars. For keeping the reliable train communication system with train coaches and power cars, train uses the OSI model(Open Systems Interconnection Basic Reference Model) and KTX(Korea Train eXpress) only uses the Physical to Transport layer of OSI model. This paper describes the analysis of CLNP(Connectionless Network Protocol) and ES-IS(End System to Intermediate System) protocols used in KTX for the network layer. CLNP is used to send data to other system and ES-IS protocol is used to route and send information between end systems and intermediate systems. Also this paper presents the protocol parsing program and implementation of Network layer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.511-518
• /
• 2000

The high speed train service will be offered for high-quality transport service in existing railway by Korean National Railroad(KNR). Therefore, this paper presents the results of analysis carried out to determine the dynamic response characteristics of deck plate girder bridges which are representative elevated structures of existing railway and to evaluate their suitabilities for supporting Korea Train Express(KTX) trainsets in the speed range 0-250 km/h. Their dynamic characteristics are analyzed concerning structural safety, train-operation safety and passenger comfort. The simplified method for 2-dimensional train/track/bridge interaction analysis is utilized in the analysis of dynamic behaviors of deck plate girder bridges.

• Wind and Structures
• /
• 제10권5호
• /
• pp.437-462
• /
• 2007

A non-translating, long duration thunderstorm downburst has been simulated experimentally and numerically by modelling a spatially stationary steady flow impinging air jet. Velocity profiles were shown to compare well with an upper-bound of velocity measurements reported for full-scale microbursts. Velocity speed-up over a range of topographic features in simulated downburst flow was also tested with comparisons made to previous work in a similar flow, and also boundary layer wind tunnel experiments. It was found that the amplification measured above the crest of topographic features in simulated downburst flow was up to 35% less than that observed in boundary layer flow for all shapes tested. From the computational standpoint we conclude that the Shear Stress Transport (SST) model performs the best from amongst a range of eddy-viscosity and second moment closures tested for modelling the impinging jet flow.