• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.1-13
• /
• 2018

The present study was conducted to analyze transport mode choice factors of shippers in Korea and to suggest policy implications and directions for future research. The findings showed that the research on freight mode choice factors in Korea is somewhat insufficient compared to that of other countries. In order to enhance the research, it is necessary to expand the number of studies and to strengthen the research to reflect characteristics of each transport mode. In particular, it is necessary to focus on identifying the characteristics of multimodal transport, including railway and shipping linked to truck. On the other hand, it was confirmed that the major factors influencing the choice of transport mode of shippers in Korea overlapped with foreign research cases. In addition, the implications for policy were derived when the analysis was separately conducted for Korea and other countries regarding individual transport mode and transport range. These results could be applied to various fields such as policy making to improve the efficiency of shippers' selection of transport mode and the estimation of transport mode choice model.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1691-1707
• /
• 2009

These days, environment has became more and more important global issues including Climate Change Convention which 40 developed countries have to decrease CO2 emission by 5.2% compared with 1990 emission. Rail transport in Korea are becoming more important as a solution for environment and energy owing to high energy consumption country. Rail transport is environment-friendly mode compared with truck mode (energy consumption 14.2 times, CO2 emission 13.4 times), but it has door-to-door problem and "DMT transport system for rail logistics" can be a solution for this problem and this system can lead to environment-friendly transport mode by rail. This study will review the background of worldwide and Korean DMT system, customers' needs, and analyze transport cost with other transport mode. Through theses kinds of review and analysis, this study will propose DMT terminal, DMT rolling stock, and DMT operation system.

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.137-144
• /
• 2010

In light of the growing traffic congestion problem and congestion cost, the container transport by railway has to be increased. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the DMT(Dual Mode Trailer) transport system which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. The DMT transport will therefore serve the areas required by transport organizers. The purpose of this paper is to estimate economical feasibility analysis for development of DMT transport system. Consequently, this study analyzed the characteristics of the DMT system. The horizontal load.unload system is being considered as an adoptable DMT system in consideration of the situation in Korea.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.103-124
• /
• 2006

This paper is concerned with a comparative study on the economic effects upon the Korean economy by transport mode, ie road, rail, air, and coastal and inland water transportation between 1990 and 2000, using input-output analysis. The economic effects consist of backward and forward linkage effects, production inducing and import-inducing effects. The data employed for this study come from the Bank of Korea database for Input-Output structure of the Korean economy. The major findings in this study are, among others:(1) the power of dispersion(=backward linkage effect) of coastal and inland water transportation sector is the highest among the four transport sectors, while road cargo transport mode showed the highest the degree of sensitivity (=forward linkage effect); (2) rail cargo transport recorded the highest production inducing effects; and (3) air transport mode achieved the highest ranking in the import-inducing effects.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3347-3352
• /
• 2022

In 2013, the International Atomic Energy Agency (IAEA) changed the recommended maximum range of the Emergency Planning Zone (EPZ) to 30 km, and the Kori Nuclear Power Plant in Republic of Korea has also expanded the EPZ to 30 km, following the recommendation. As a result, metropolitan cities with a high population density are contained within the EPZ, and evacuating millions of people should be considered if the 30 km range of evacuation is to take place. This study proposes an evacuation plan using buses (public transportation) to transport people outside of the EPZ, quickly and efficiently. To verify the appropriate mode share ratio of buses that can guarantee the right of vulnerable road users and reduce traffic congestion, a model was built simulating the Kori Nuclear Power Plant in Ulsan Metropolitan City. The scenarios were established by changing the mode share ratio of buses and passenger cars by 10%. Considering a large-scale network analysis at the city level, a cell transmission model was applied to calculate the evacuation time in each scenario. The result shows that the optimal mode share ratio of buses is 40%, with a total evacuation time of 132 min, considering feasible bus fleets in Ulsan Metropolitan City.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.7 s.262
• /
• pp.588-595
• /
• 2007

The water transport inside a polymer electrolyte fuel cell (PEFC) varied according to the anodic supply mode. The performance characteristics of a PEFC which can be affected by the water transport were observed with the anodic supply mode. In the flow-through and recirculation mode the performance showed no reduction with time because the flow in the anode was not stagnated. In the dead-end mode, without any discharged gas, the water remains inside of the anode, which caused the reduction of the performance with the lapse of time. However, even in the dead-end mode, little reduction of the performance with time was shown when only the anode was humidified externally. It means that the back-diffusion was the major factor to the accumulation of water in the anode rather than external humidification.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.735-742
• /
• 2019

In this work, the electrokinetic interactions between the undulated structure of an ion-selective membrane and electroconvective instability has been studied using numerical analysis. Using finite element method, electric field-ionic species transport-flow field were analyzed by fully-coupled manner. Through the numerical study, the Dukhin's mode as the mechanism of undulated surface for the electroconvective instability were proven. The Dukhin's mode which competes with Rubinstein's mode has roles of (i) decreasing transition voltage to overlimiting regime and (ii) non-linearly increasing of overlimiting current. Also, (iii) the mixing efficiency is enhanced by removal mechanism of high-frequency Fourier mode of the electroconvective instability. Conclusively, the undulated ion-selective surface would provide energy-efficient mechanism for ion-selective transport systems such as electrodialysis, electrochemical battery, etc.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.588-595
• /
• 2008

This study is carried out for understanding mode choice behavior of shippers and introducing ideal mode share between rail and truck in Korea. The model type is individual behavioral model and the input data type is stated preference (SP) data. SP data was prepared by design of experiments. The explanatory variables in models are transport time, transport cost and service level. The research result shows that it is more effective to reduce transport cost rather than to implement other strategies. For container, reducing transport cost and transport time and increasing service level simultaneously can strengthen the competitiveness of rail over truck transportation. On the other hand, for bulk freight such as cement and steel, it is better to reduce the transport cost than to do other attributes.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2917-2920
• /
• 2011

This study aim at demonstrating the environmental performance of freight transport of the rail and road mode through an indicator of embodied energy and $CO_2$ emissions. Using the concept of LCA, the scope of evaluation includes energy production, supply chain activity and operation. The results of embodied energy and $CO_2$ emissions are normalized by means of traffic volume. The results shown that embodied $CO_2$ emissions road mode is 607.07 $gCO_2-eq./tkm$ and 284.67 $gCO_2-eq./tkm$ for road and rail mode, respectively. This number reveals that road mode is 2.1 times larger than rail mode. The results also indicate that the main contribution of $CO_2$ emission from road mode is in the operation stage, which accounts for 70%; however, it is the construction and supply chain stage that accounts for over 50% of the emission of rail mode.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.81-89
• /
• 2011

Trip distribution is the second step of the conventional travel demand estimation process, which connects trips between origin and destination, while transport mode choice is the third step of the process, which chooses transport mode among several modes serving for each origin-destination pair. Although these two steps have closely connected, they have been estimated independently each other in the estimation procedure. This paper presents an integrated model combining trip distribution and transport mode choice, and also presents its solution algorithm. The model integrates gravity model adopted for the trip distribution process with logit model employed for the mode choice process. The model would be expected to cope with the inconsistency issue existing in the conventional travel demand estimation procedure. This paper also presents an equilibrium condition, sensitivity of the model, and compares them with those of existing models.