• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.2075-2078
• /
• 2002

Internet became the most popular network in spite of its weakness in realtime multimedia service. Many experts believe that the Internet has the potential to become the main multimedia distribution network of the near future. Currently, it does not provide any (BoS guarantees and, even when it does, guaranteed quality delivery of video may turn out to be too expensive. Unavoidable packet losses and delay jitter caused by congestion in a best effort delivery environment require use of intelligent transport techniques for effective video delivery. According to market needs of better quality of service (QoS) fur realtime multimedia services over Internet, they have been standardizing RSVP, IntServ, and DiffServ This paper combines the benefits of QoS mechanisms such as RSVP/IntServ with scalable video encoding. We propose that more important bit stream is given more priority such that limited network resources are guaranteed far the stream. Various prioritizing approaches are proposed and compared to normal approach by using Network Simulator. The calculated QoS parameters such as packet loss rate are used to calculate degree of degradation in video quality. In this Paper, proposed methods can be implemented adaptively to Von protocol, such as H.323, SIP.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.879-886
• /
• 2004

A numerical optimization has been carried out to determine the shape of the three-dimensional channel with oblique ribs attached on both walls to enhance turbulent heat transfer. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer. Shear stress transport (SST) turbulence model is used as a turbulence closure. Numerical results fur heat transfer rate show good agreements with experimental data. four dimensionless variables such as, rib pitch-to-rib height ratio, rib height-to-channel height ratio, streamwise rib distance on opposite wall to rib pitch ratio, and the attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related coefficients with a weighting factor. D-optimal method is used to determine the training points as a means of design of experiment. Sensitivity of the objective parameters to each design variable has been analyzed. And, optimal values of the design variables have been obtained in a range of the weighting factor.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.911-925
• /
• 1996

미래의 멀티미디어 응용 환경은 각 매체와 응용의 요구 사항들을 효율적으로 충족시킬 수 있는 유연한 오류 제어 모델을 필요로 하고 있으나, 지금까지의 오류 제어는 단일 매체를 처리하기 위한 제한된 유연성만이 제공되어왔다. 이를 해결하기 위하여 본 논문에서는 매체의 신뢰도 기준인 오류 허용률(ETL: Error Tolerance Level)과 응용의 실시간성 기준인 지연(Delay)을 고려하여 수송 계층에서 매체별로 유연하게 오류 제어 방법을 적용하는 모델을 제안한다. 이 모델에서는 매체별로 오류 제어 방법을 선정하기 위하여 오류 혀용률과 등시성과 같은 매체의 속성, 응용의 속성인 지연, 그리고 망에서의 데이터 손실율, 망의 전송 형태, 응용의 연결 모드와 같은 환경 파라미터가 영향 인자로써 고려되었다.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1070-1078
• /
• 1998

A density of phonon is increased by application of electric field. At this time the phonon which has higher energy than around is called hot phonon is disappeared after 7 picosecond by scattering with electron and loss energy. Since the lifetime of phonon is very short, the effects of hot phonon can be neglected in the low speed semiconductor device, but it must be considered in high speed devices. DC and AC electric fields are applied to bulk GaAs, and the density of phonon is obtained and analyzed for its effects on electron velocity and electron distribution using Monte Carlo simulation method. Under high electric filed the density of hot phonon increased and energy of hot phonon is decreased by scattering with electron on the other hand the energy of electron is increased. Therefore electron move from central valley of conduntion band to satellite vallies and the valocity of electron decrease since the mass of electron in satellite vally is heavier than central vally. In millimeter wave frequencies, the effects of hot phonon increased at higher frequencies.

• 한국해안해양공학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 1999

해안 및 해양에 설치되어 있는 해저관로는 원유, 가스, 물과 이들의 혼합된 유체들을 전달하기 위한 수단으로 사용되고 있다. 관로 내부 유체의 열과 압력 차이는 해저관로의 팽찰을 야기시킨다. 해전관로 팽창은 관로와 연결되는 구조물들에 응력을 유발시킨다. 작용 응력이 연결 부재의 항복점을 초과하거나 전체 시스템의 허용변형을 초과할 경우 구조물에 손상이 발생된다. 해안 및 해양에 설치되는 해저관로는 주로 위험 물질이나 유독 유체를 포함하기 때문에 만약 이런 유체의 유출이 발생될 경우 인명 피해는 물론 큰 경제적 손실을 가져온다. 비록 해저관로는 시간적/공간적 제약 없이 유체를 전달할 수 있지만, 이런 관로 설계시 안전하게 그 기능을 수행할 수 있도록 고려되어야 한다. 본 논문에서는 해저관로의 열변형 해석에 사용되는 여러 개의 이론을 조사하였고, 관로의 요소들이 관로 팽창에 미치는 영향에 대해 조사하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.490-491
• /
• 2007

We have investigated dielectric polarization in organic light-emitting diodes using 8-hydroxyquinoline aluminum$(Alq_3)$ as an electron transport and emissive material. We analyzed the dielectric polarization of organic light emitting diodes using impedance. Impedance characteristics was measured complex impedance Z and phase ${\theta}$ in the frequency range of 40Hz to $10^8Hz$. We obtained dielectric constant and loss tangent (tan ${\delta}$) of the device. From these analyses, we are able to interpret a dielectric dispersion and dielectric absorption contributed by an interfacial and orientational polarization.

• 토지주택연구
• /
• 제4권2호
• /
• pp.153-165
• /
• 2013

Deficiency in access to housing is a major manifestation of poverty. In the city of Bangalore, the poor and the marginalized constitute nearly 30 percent of the 8.47 million population (2011 Census) and are living in the nearly 640 slums in addition to squatter settlements and pavements. The city sprawls over an area of 741 sq. kms (2007 estimates) and the poor have very little access to personal living space. According to the Integrated Housing and Slum Development Program guidelines, each household with four average members should have 25 sq. meters of living space. In the case of poor of Bangalore, the attainment of even this minimum is a far cry. In recognition of this acuteness with regard to the problem of housing, the government has introduced schemes like the Jawaharlal Nehru National Urban Renewal Mission and the Rajiv Awas Yojana. And these schemes have witnessed only a limited success. Whenever the problem of housing for the urban poor is considered, the state and location of slums get into focus. The people living in slums are a crucial and inevitable support to the city economy. Relocation of slum people is fraught with loss of productivity and strain on the transport system and on the incomes of the poor. Their needs like housing, schooling, health centers, creches, hospices etc. have to be provided for. Financial support to the poor with regard to their housing needs will have to be imaginatively provided by banks and related institutions.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.460-468
• /
• 2005

Analyses of flow and heat transfer characteristics and shape optimization of internally finned circular tubes have been performed for three-dimensional periodically fully developed turbulent flow and heat transfer. CFD and mathematical optimization are coupled in order to optimize the shape of heat exchanger. The design variables such as fin widths $(d_{1},\;d_{2})$ and fin height (h) are numerically optimized by minimizing the pressure loss and maximizing the heat transfer rate for limiting conditions of $d_{1}=0.2\~1.5\;mm,\;d_{2}=0.2\~1.5\;mm,$ and $h=0.2\~1.5mm$. Due to the periodic boundary conditions along main flow direction, the three layers of meshes are considered. The flow and thermal fields are predicted using the finite volume method and the optimization is carried out by means of the sequential quadratic programming (SQP) method which is widely used in the constrained nonlinear optimization problem.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3196-3206
• /
• 2021

For the Korean design of the PCCS (passive containment cooling system) in an innovative PWR, the overall thermal resistance around a condenser tube is dominated by the heat transfer coefficient of steam condensation on the exterior surface. It has been reported, however, that the calculated heat transfer coefficients by thermal-hydraulic system codes were much lower than measured data in separate effect tests. In this study, a new empirical model of steam condensation in the presence of a noncondensable gas was implemented into the MARS-KS 1.4 code to replace the conventional Colburn-Hougen model. The selected correlation had been developed from condensation test data obtained at the JERICHO (JNU Experimental Rig for Investigation of Condensation Heat transfer On tube) facility, and considered the effect of the Grashof number for naturally circulating gas mixture and the curvature of the condenser tube. The modified MARS-KS code was applied to simulate the transient response of the containment equipped with the PCCS to the large-break loss-of-coolant accident. The heat removal performances of the PCCS and corresponding evolution of the containment pressure were compared to those calculated via the original model. Various thermal-hydraulic parameters associated with the natural circulation operation through the heat transport circuit were also investigated.

• 대한건축학회논문집:계획계
• /
• 제34권4호
• /
• pp.19-25
• /
• 2018

At present, there are many companies that can produce modular housing. However, if the housing projects are conducted without design standards and principles, each company will supply housing according to its own design standards, resulting in a loss of opportunity to promote standardization at a national level. Korea's modular construction technology is still in its infancy, and there is a lack of MC design applications due to the limited construction market. In recent years, however, related R&D has been carried out by the Ministry of Land, Infrastructure and Transport in order to activate modular construction. As a result, test-beds for public rental housing are currently being built, and the public rental housing applied with the modular construction method is expected to spread in the near future. In this regard, this study seeks to promote more economical and efficient production and supply of modular housing. To this end, it investigates the current status of modular construction, analyzes the problems and proposes a serious of MC design standards as part of the design standardization and open system for modular housing industry to solve the problems.