• Title/Summary/Keyword: Transport control protocol (TCP)

Search Result 75, Processing Time 0.02 seconds

Fast Transmission Algorithm over ATM for Broadcasting Production Nework (방송 제작 네트워크를 위한 ATM 상의 고속 전송 알고리즘)

  • 김태현;김경수
    • Journal of Broadcast Engineering
    • /
    • v.3 no.2
    • /
    • pp.138-145
    • /
    • 1998
  • 최근 ATM(Asynchronous Transfer Mode) 네트워크를 비롯한 많은 데이터 전송 기술이 등장하였고, 이를 이용하여 동영상을 전달하는 연구가 진행되고 있다. 그러나 이러한 연구들은 대부분 동영상 데이터의 스트리밍에 주안점을 두고 있기 때문에, ATM 네트워크 기반으로 손실없는 방송 제작 환경을 구축하기 위해서는 에러가 발생하더라도 고속으로 복원할 수 있는 알고리즘이 필요하다. 본 논문에서는 ATM 네트워크 상에서 방송 제작 품질로 압축된 동영상을 TCP(Transport Control Protocol) 기반으로 전송하는 경우에 대하여 연구하였다. 실제 데이터의 송수신에는 잡음으로 인한 ATM 셀의 손실이 발생하게되는데, ATM 셀의 손실로 인한 패킷의 손실은 송신측의 재전송과 재전송 타임 아웃을 유발하므로 전송 성능에 지대한 영향을 미친다. 본 논문에서는 손실된 패킷의 연속적인 재전송을 통하여, 재전송 시간의 단축과 송신측 재전송 타임 아웃의 제거된 고속의 손실 복구 알고리즘을 제안하였고, 그 성능을 기존의 알고리즘과 비교하였다. 또한, 본 논문에서는 영상을 전송하는 과정에서 데이터 수신 버퍼의 오버플로우가 발생하지 않도록 충분한 버퍼 크기를 계산하는 방법에 관해서도 고찰하였다. 특히, 방송 제작 품질의 화질을 처리하는 경우에 대한 시스템 모델링을 하였고, 이 모델에 대하여 오버플로우를 일정 수준 이하로 낮추기 위한 수신 버퍼의 크기를 결정하였다.

  • PDF

The Design of Telemedicine System using RTP and JMF (RTP 와 JMF 기반의 원격진료 화상회의 시스템 설계 및 구현)

  • 이광빈;이배호;노현주;정태웅
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.10e
    • /
    • pp.556-558
    • /
    • 2002
  • 본 연구에서는 인터넷 상 원격진료(Telemedicine)에서 가장 중요한 실시간 데이터공유를 원활히 하기 위해 과도한 지연을 방지할 수 있는 실시간 전송 프로토콜RTP(Real-time Transport Protocol)즉 사용하였다. 또한 자바 애플릿(Applet) 프로그램 구현을 통해 강력한 확장성과 멀티 플랫폼(multi-platform)을 갖으며, JMF를 사용하여 RTP 지원과 멀티미디어 데이터를 보다 쉽고 효율적으로 처리하였다. 이러한 방법을 통해 기존TCP/IP 기반의 응용 프로그램에서 거의 불가능하였던 네트워크 트래픽 제어(Network Traffic control)를 효율적으로 개선하였으며, 영상압축 데이터는 RTP로 전송함으로써 자바가 가지는 확장성을 손상시키지 않으면서 최적화 ,문제를 해결하였다. 또한, 웹 서버 측 데몬(demon)을 제외 한 모든 프로그램을 애플릿으로 구현함으로써 기존의 응용 프로그램 원격진료 시스템 설치 및 제거의 어려움을 없애 누구나 쉽고 빠르게 시스템을 이용할 수 있다. 마지막으로 모든 플랫폼에 걸쳐 15frames/sec 이상의 원활한 데이터 전송과 2초 이내의 지연방지가 가능하도록 개선하였다.

  • PDF

A DDoS attack Mitigation in IoT Communications Using Machine Learning

  • Hailye Tekleselase
    • International Journal of Computer Science & Network Security
    • /
    • v.24 no.4
    • /
    • pp.170-178
    • /
    • 2024
  • Through the growth of the fifth-generation networks and artificial intelligence technologies, new threats and challenges have appeared to wireless communication system, especially in cybersecurity. And IoT networks are gradually attractive stages for introduction of DDoS attacks due to integral frailer security and resource-constrained nature of IoT devices. This paper emphases on detecting DDoS attack in wireless networks by categorizing inward network packets on the transport layer as either "abnormal" or "normal" using the integration of machine learning algorithms knowledge-based system. In this paper, deep learning algorithms and CNN were autonomously trained for mitigating DDoS attacks. This paper lays importance on misuse based DDOS attacks which comprise TCP SYN-Flood and ICMP flood. The researcher uses CICIDS2017 and NSL-KDD dataset in training and testing the algorithms (model) while the experimentation phase. accuracy score is used to measure the classification performance of the four algorithms. the results display that the 99.93 performance is recorded.

Congestion Detection and Avoidance for Reliable Data Transmission in Wireless Sensor Networks (무선 센서 네트워크에서 신뢰성 있는 데이터 전송을 위한 혼잡 탐지와 회피)

  • Park, Hong-Jin;Jang, Jae-Bok
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.3
    • /
    • pp.343-350
    • /
    • 2010
  • Wireless Sensor Network is an event-driven system that a large number of micro sensor nodes are collected, giving and Wing information. Congestion can take place easily since a great number of sensor nodes are sensing data and transferring them to sink nodes when an event occurs, comparing to the existing wired network. Current internet transport protocol is TCP/UDP, however, this is not proper for wireless sensor network event-driven ESRT, STCP and CODA are being studied for reliable data transport in the wireless sensor network. Congestion are being detected local buffer and channel loading with these techniques. Broadcasting is mainly used and can avoid congestion when one happens. The way that combining local buffer and channel loading information and detecting congestion is being studied in this paper. When congestion occurs, buffering state is divided into three in order to lessen the broadcasting sending the message on congestion control to the node having frequent channel loading. Thus they have advantage of decreasing network's loading.

Selection of Cross-layered Retransmission Schemes based on Service Characteristics (서비스 특성을 고려한 다 계층 재전송 방식 선택)

  • Go, Kwang-Chun;Kim, Jae-Hyun
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.5
    • /
    • pp.3-9
    • /
    • 2015
  • The wireless communication system adopts an appropriate retransmission scheme on each system protocol layer to improve reliability of data transmission. In each system protocol layer, the retransmission scheme operates in independently other layers and operates based on the parameters without reference to end-to-end performance of wireless communication system. For this reason, it is difficult to design the optimal system parameters that satisfy the QoS requirements for each service class. Thus, the performance analysis of wireless communication system is needed to design the optimal system parameters according to the end-to-end QoS requirements for each service class. In this paper, we derive the mathematical model to formulate the end-to-end performance of wireless communication system. We also evaluate the performance at the MAC and transport layers in terms of average spectral efficiency and average transmission delay. Based on the results of performance evaluations, we design the optimal system parameters according to the QoS requirements of service classes. From the results, the HARQ combined with AMC is appropriate for the delay-sensitive service and the ARQ combined with AMC is appropriate for a service that is insensitive to transmission delay. Also, the TCP can be applied for the delay-insensitive service only.