• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.3-20
• /
• 1990

The Port of Pusan, the largest port in Korea, handled 23% of total sea borne cargo movement, 14% of imported cargo, 58% of exported cargo and 95% of container cargo in 1989. Also the port of Pusan has been played a key role in handing container cargo throughout the last 10 years. The paper is aimed to survey the effect of sea borne cargo movement to urban transportation, that is, to find traffic volume arising by general/bulk cargoes through the port and to estimate vehicle rated of container tractor tailer on the roads between terminal including conventional piers and ODCY, and finally the following results are obtained. (1) AADV of truck to transport general/bulk cargoes are 6,322 units in 1989,and routes penetrate into the center of city and pass through the most of urban arterials. (2) In the container transport, if HVEF is adopted to 3 of tractor trailer, AVR in each transport freeway 13.7%. (3) IF HVEF is adopted to 6 of tractor trailer. AVR are as follows: BooDoo-Ro 44.1%, WooAm-Ro 39.3%, SooYoung-Ro 17.8%, Urban freeway 20.3%. Based upon these results, the following suggestions were drawn : o ODCY scattered around the city should be unified in a few groups to raise port productivity. o Rail service for inland container transportation should be escalated to relieve urban traffic congestion. o Coastal feeder service between terminal and hinterland should be studied to restrict the penetration of container tractor trailer into the central parts in the urban areas. o Exclusive freeway system for effective container transportation should be implemented to reduce urban traffic delay.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.7-14
• /
• 2000

The purpose of this study is to improvement strategies for transportation systems of container cargo in Busan port. Therefore, it was forecasted the future container cargo demand using logistic curve formula. In 2011, container cargo demand was forecasted 8.791 million TEU(T/S including 12.559 million TEU). In order to improvement transportation systems of container cargo, this study presented following; $\circled1$ port facilities expansion, $\circled2$ diversity of container transport modes. $\circled3$ make up ICD and exclusive container roads, $\circled4$ the second Seoul-Busan Expressway.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.19-26
• /
• 2001

The purpose of this study is to improve the strategies for transportation systems of container cargoes in Busan port. Therefore, container cargoes forecasting is done through logistic methods based on past trends. In 2011, container cargoes demand was forecasted 8.791 million TEU(T/S including 12.559 million TEU). In order to improve transportation systems of container cargoes, the conclusions of this study can be summarized as follows ; \circled1 port facilities expansion, \circled2 diversity of container transport modes, \circled3 make up ICD and exclusive container roads, \circled4 the second Seoul-Busan Expressway.

• International Commerce and Information Review
• /
• v.12 no.2
• /
• pp.133-158
• /
• 2010

Since 11 September 2001, the awareness of terrorists' actions has clearly risen. The potential threat of terrorists using containers poses a large risk to our economies and to our societies. In order to protect cargo from damage and terrorist threats, business and government turn to RFID and IC tags, and tradition container is replaced by IC smart container. In this study, presented application of IC tag and future tasks to Container transport by sea in viewpoint of security strengthening. First, realization and international SCM realization structural order that cover container supply chain whole of international standardization and association between industry are certainly needed. Second, it may have to try in technical development for IC tag Ratio that can read elevation moment develop suitable IC tag or reader in International Standard. Third, Need to establish concrete use policy as soon as possible in national dimension at the same time effort for international standard normalization of frequency. Finally, it shows to uses jointly with electron sealing and must solve problem about usable plan and information leak.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.35-40
• /
• 2015

An IP-2 type container is used for the transport of low-level radioactive materials. An IP-2 type metal container was modeled and analyzed for the dropping conditions in normal transport conditions required by NSSC Notice 2014-50, "Regulations on the packaging and transport of radioactive materials." Structural analyses were performed by finite element method, and the acceptability was reviewed by comparing the results with technical standards and maximum allowable stresses of each material. Structural members of the container were modeled as 3D solid elements, and the possible dropping directions were considered in these analyses. Results show that maximum stresses, maximum deformed gaps in the cover, and maximum estimated thickness reduction in structural members were well below the allowable limits; thus, the structural integrity of the container was confirmed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.155-169
• /
• 2007

A transport container for a 500 kCi tritium storage vessel was developed, which could be used for the transport of metal tritide from Wolsong TRF facility to a disposal site. The structural, thermal, shielding, and confinement analyses were performed for the container in a view of Type B. As a result of structural analysis, the developed container sustained its integrity under normal and accidental conditions. The maximum temperature increase of the inner storage vessel by radiation was evaluated at $134.8^{\circ}C at room temperature. In $800^{\circ}C$ fire test, The thermal barrier of container sustained the inner vessel at $405^{\circ}C after 30 min, which temperature was allowable for the container integrity since maximum design temperature of inner vessel was $550^{\circ}C. In the evaluation of the shielding, the activity of radiation was nearly zero on the outer surface of inner vessel. Consequently the transport container for a 500 kCi tritium was evaluated to pass all the safety tests including accidental condition, so it was concluded that the designed transport container is proper to be used.

• Journal of Korea Trade
• /
• v.24 no.6
• /
• pp.115-134
• /
• 2020

Purpose - International trade leads to the international division of labor, improving the efficiency of the global economic system. Transport costs are a more serious barrier to international trade than customs tariffs. An increase in competition in the transport sector may thus lead to a reduction in transport costs. However, if a carrier's nationality significantly influences transport costs, simply adding more competing carriers of different nationalities would be ineffective. Therefore, it is necessary to establish national or regional carriers to influence competition and reduce transport costs. This study investigates this "nationality effect" by treating Hanjin Shipping's collapse as a natural experiment. Design/methodology - The theoretical basis of this study is the 3rd-degree price discrimination in container shipping market. By using the monthly data of container freight rates of Korea, China and Japan, this study shows the so-called Korea Premiums, which are the empirical counterparts of nationality effect in Korea container shipping market. For this empirical investigation, the structural model with state-space form is used and the dummy models are also estimated. In addition, because China has been also affected by the Hanjin's collapse, the China premiums are considered too. Findings - Compared with Japan's case, it is shown that there had been the so-called Korea premiums since the collapse of Hanjin Shipping. These results are robust from both the state-space model and dummy models. The time pattern of Korea premiums was consistent with the market evolution, especially the pattern of substitutability in container shipping markets. In addition, this paper shows the magnitude of Korea premiums. Originality/value - The argument of this study that the nationality effect can be interpreted as an extended concept of the home market effect is original, which is expected to evoke future research efforts. Further, the discussion on the shipping industrial policy from both horizontal and vertical aspects will provide the relevant policy makers with solid information, especially for the policy coordination in a global scale.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.69-80
• /
• 2022

Road transportation accounts for the largest share of cargo transport in Korea. Inland transportation is not only the beginning and completion point of container transportation, but it is also very complex and has many workers. The main job of container drivers, who play a key role in inland logistics, is to transport containers from ports and terminals to destinations. However, in addition to the main role, various container management obligations, such as cleaning containers and managing damaged containers during the transportation process, are implicitly transferred to container drivers. However, little research has been conducted on this issue. This study identified the working environment of container drivers and empirically analyzed the current status of container management responsibilities by drivers. Furthermore, it analyzed whether there was a difference in the degree of container management requirements by shipping company, terminal, and shipper. Differences in requirements for region(Busan, Kwangyang, Pohang) were analyzed, and improvement measures for the problem of transferring container management were also presented.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.139-166
• /
• 2001

Globalization and regionalization are major trends in the international economic system. The severe competition among countries has signalled the need for a new international trade system as prescribed by the WTO, which regulates international trade practices. Additionally, expanding the activities and role of the Pan-Yellow Sea area in the world has a very important function in terms of regional cooperation and logistics environment. In this paper, the trading conditions and shipping transport problems of the Pan-Yellow Sea area (North-East Asia) were investigated. Shipping transport conditions in the Pan-Yellow Sea area, particularly Korea-China routes, were surveyed as well. A new Incheon-China container liner route was suggested as a partial remedy to some of the shipping transport problems of the Pan-Yellow Sea Area (North-East Asia). The Incheon-China Container Liner route is more efficient than Pusan and Pyungtaek Ports or the car ferry route to China in terms of transport time and expense. The transport burden indicator which includes the time and expense of transport, can be a useful tool in comparing these routes. Accordign to the transport burden indicator, the Incheon-China Container Liner route is more efficient than the Pusan, Pyungtaek, or car ferry routes. To establish a successful liner route between the ports of Inchon and China, there is a need to prepare three measures that contain short-term medium-term and long-term strategies. Furthermore, these measures should be prepared and adopted in phases, in accordance with considerations of future conditions for shipping and logistics in the Pan-Yellow Sea area.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.829-835
• /
• 2008

The objective of this study is to present the two-step dispatching strategy for the purpose of the transport vehicle with multi-function used in container terminal. The two-step dispatching is a method to save the waiting time between transport vehicle and cranes using real time location control. The first step dispatching is to allocate the destination location based on the real time location information. The second step dispatching is to indicate the specific job such as loading, unloading, and pick-up based on the condition of working area. This two-step dispatching strategy decreases the waiting times of the stevedoring system and will contribute at a productivity improvement in container terminal.