• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.203-212
• /
• 2006

The purpose of this research is to suggest the activation plan of Busan port. In the past years, Busan port enjoyed the golden days because of the China's rapid economic growth. But China's continuous development of ports, the trend of increasing container ship size and increasing direct call to China are coming threats to Busan port. So Korea needs to revise the 'Northeast Logistics Hub' strategy because it is considered that Korea ports continuously will handle China's transshipment cargoes. But now China's transshipment cargo share has decreased by direct call to China ports. It means that China has a lot of its local cargoes, so many ship companies change liner service route to handle China cargoes except Bussan ports although Busan port is included in the main trunk route. In the future, Bussan port will not be able to compete again about throughput with China ports if Busan port's transshipment cargo share decreases. So we must find out and develop Busan port's strength which is the competitive edge. By good luck, Busan port has a few opportunities such as the developed feeder network service and geographical advantages. Busan port has many feeder network service like spider's web in any northeast countries so we can suggest that if Japanese shippers use Busan port to distribute their cargoes to Japanese local areas, its transport costs are cheaper than when they use Japan's main ports. In this paper analyzed side of cost when they use Bussan port like hub to distribute their cargo to their local areas. Because most companies tried to reduce the total cost about logistics. Finally, this paper suggests when northeast shippers(China, Japan) use Bussan port which is more economical than their local main ports.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.401-408
• /
• 2017

The Street Turn system in South Korea has been developing continuously with the advancement of information technology; however, this has not lead to an increase of the Street Turn transportation volume. As a result, this study presents the decision-making factors for using the system from the standpoint of users of the existing Street Turn transportation system. The people who have used domestic Street Turn transportation services or who are working in a shipping company were analyzed using Fuzzy-AHP. A total of five major factors and 17 detailed factors were derived from this analysis. As a result, timeliness was selected as the most important major factor, and in particular, the information provision time (0.207) was selected as the most important factor, followed by platform use process (0.079), and number of participating shippers (0.074).

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.746-751
• /
• 2014

In this paper, ship performance prediction solver was developed using open source computational fluid dynamics (CFD) libraries. The mass- and momentum-conservation equations and turbulent model with a wall function for the turbulent closer were considered. The volume fraction transport equation with a high-resolution interface capturing scheme were selected for free-surface simulation. The predicted wave pattern around KRISO container ship (KCS) using developed program showed good agreement against existing experimental data. For the revolution of a propeller in the propulsive test, general grid interface (GGI) library was used. The predicted propulsive performance showed 7 % difference against experimental data. Two-phase mixture model was developed to simulate a cavitation and applied to a propeller. The sheet cavitation on the propeller was predicted well. From results, the potential of the numerical tank developed by open source libraries was verified by applying it to KCS.

• The Journal of shipping and logistics
• /
• v.34 no.4
• /
• pp.615-635
• /
• 2018

Using data from 2008 to 2017, this study analyzed the financial characteristics of offshore freight shipping companies in Korea, categorized by vessel type, and their impact on business performance. The analysis showed an upward trend in the overall debt ratio of offshore freight transport companies and differences in the financial characteristics of each vessel type as well as the major factors affecting business performance. In particular, the significant factors affecting the ROA performance of the business are the size of business and debt ratio in the LPG line; the growth rate in the bulk line; the size of business, debt ratio, and year in the general freight line; and the size of business, growth rate, entertainment expense rate, debt ratio, and year in the full container line. Therefore, each shipping company needs to recognize differences in key financial factors affecting its performance based on vessel type, implement proactive measures, and diversify its vessel portfolio.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.111-132
• /
• 2018

As China continues to evolve as a major economic power and the Free Trade Agreement (FTA) between the Republic of Korea and China was ratified on June 1, 2015, market volume between the two countries is expected to grow more rapidly. This study aims on improving the efficiency of car-ferry lines. We conducted two surveys- for shippers and forwarders of car-ferry companies, and container liners. The study analyzes the decision factors for delivery companies and their importance for shippers and forwarders of car-ferry companies and container liners. Based on analysis of prior studies on the competition for car-ferry companies and liners, three primary variables are selected-promptness, economics, and safety. The promptness variable consists of shipping time, loading/unloading time, and customs clearing time. The economic variable consists of marine transportation cost from a domestic harbor to China, loading/unloading cost in the harbor, and overland transport cost from the harbor to shippers inland. Finally, the safety variable consists of cargo damage rates, safety facilities, such as lashing and shoring, and punctuality of transportation time. The survey and AHP results show that the promptness, safety, and economics factors are 0.549, 0.309, and 0.142 in the shipper groups of car-ferry companies' category, respectively. It indicates that there is considerable difference in the importance of each factor. In contrast, the factors are 0.350, 0.348, and 0.302 in the forwarders category, which suggests that there is little difference in each factor's importance. As for shippers and forwarders of liners, the importance of each factor is found to be in the following order: economics, safety, and promptness.

• The Journal of Society for e-Business Studies
• /
• v.13 no.3
• /
• pp.121-135
• /
• 2008

Railroad logistics transporting freight by train takes charge of 10 or 20 percent of domestic cargos. Railroad logistics users such as transport companies including shippers or Inland Container Depot(ICD) use electronic document(EDI or XML) or input data through WEB to process railroad logistics business. However, as business environments evolving into e-business, it is required to upgrade the legacy railroad logistics process. As the increase of using ebXML-based schema format, it is also needed to improve the electronic documents based on DTD format into those of XML schema format. This study deals with information standard for railroad logistics to improve the railroad logistics business. To this purpose railroad business processes were re-defined through the standard business process modeling methodology. Information model was also derived by defining railroad logistics activities from business process model. And Business Information Entities(BIEs) were defined to design new electronic documents according to the extracted information model. An improved system architecture for railroad logistics was proposed as well. The results of this study will provide an effective and flexible business flow to railroad logistics business.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.423-432
• /
• 2020

Objectives: In this study, we analyzed the current state of delivery containers and packages and established handling guidelines to safely transport delivery containers and packages for use in research, testing, and examination reagents. Methods: Handling guidelines were revised in such categories as maintenance of the handling facilities, storage, loading and unloading, containers and packages, transportation, etc. In addition, we analyzed the current state of domestic sales for hazardous chemicals used for research, testing, and examination reagents, and investigated the handling guidelines related to delivery transportation in the USA, EU, and Japan by chemical property. Results: There are 6,160 companies selling hazardous chemicals. Among them, the 476 companies selling reagents for use in research, testing, and examination were investigated. Total amounts handled reached 425,000 tons, contributing to 0.2% of the total. For delivery transportation, internal containers and packaging was specified for chemical properties as follows: within 1 L for flammable gas, within 5 L for flammable liquid, and within 18 L for others. In addition, the maximum size of the outer package was set within 130 cm for total length, width, and height, and no dimension of the packaging could exceed 60 cm. Sixty-four hazardous chemicals with explosiveness or acute inhalation toxicity were prohibited for delivery transportation. Conclusion: Specified handling guidelines for inner and outer containers as well as packaging were regulated for delivery transportation of hazardous chemicals used for reagents. In addition, 64 hazardous chemicals were prohibited for delivery transportation. These are designed to prevent transportation accidents involving hazardous chemicals for reagents and thus protect the safety and health of transporters who handle hazardous chemicals.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.363-370
• /
• 2014

We investigated the survival rate by water temperature and salinity, physiological rhythm and morphological change of live abalone to get to know optimum water temperature and salinity suitable for long-distance transportation of live abalone. At $8^{\circ}C$ and above, 96-100% of survival rate was shown at all experiment groups. At $6^{\circ}C$, 66% of abalones survived in normal seawater but they showed 0% of survival rate at $30{\pm}0.5psu$ and $26{\pm}0.5psu$ of salinity at the same water temperature. There was no significant difference of oxygen consumption rate for a week between the seawater and $30{\pm}0.5psu$. Also, a positive correlation was shown between salinity and water temperature and the oxygen consumption rate was slightly higher at $30{\pm}0.5psu$ than seawater. Thinned epithelial layers and expansion of lymph sinus were observed less than $30{\pm}0.5psu$ or below $6^{\circ}C$ of temperature. This result shows that the optimum level of water temperature and salinity is considered to be $6-8^{\circ}C$ and more than $30{\pm}0.5psu$ respectively.