• Wind and Structures
• /
• v.30 no.4
• /
• pp.405-421
• /
• 2020

Quayside container cranes are important delivery machineries located in the most frontiers of container terminals, where strong wind attacks happen occasionally. Since the previous researches on quayside container cranes mainly focused on the mean wind load and static response characteristics, the fluctuating wind load and dynamic response characteristics require further investigations. In the present study, the aerodynamic wind loads on quayside container cranes were obtained from wind tunnel tests. The probabilistic and spectral models of the fluctuating aerodynamic loads were established. Then the joint probabilistic distributions of dynamic wind-induced responses were derived theoretically based on a series of Gaussian and independent assumption of resonant components. Finally, the results were validated by time domain analysis using wind tunnel data. It is concluded that the assumptions are acceptable. And the presented approach can estimate peak dynamic sliding force, overturning moments and leg uplifts of quayside container cranes effectively and efficiently.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.443-449
• /
• 2004

In this paper, we established a simulation model for transport vehicle that carries the container transportation between apron and yard block on automated container terminal with a perpendicular yard layout. Usually, the efficiency of container terminal is evaluated by productivity of container cranes at apron, and though there are enough support of transport vehicles and yard cranes, can improve the productivity of container cranes. Especially, transport vehicle is very important factor in productivity of container cranes and has variable work productivity according to loading and unloading situation of container cranes. Therefore, a method that can estimate work productivity of transport vehicle efficiently is required. We analyzed work productivity of transport vehicle using simulation model that has state transition of transport vehicle. We performed various simulation experiment and analyzed work productivity of transport vehicle and calculated the required number of transport vehicle by container crane additionally.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.1
• /
• pp.19-29
• /
• 2002

In this paper, the selection of transport route for import-export container cargo based on the sacrifice model and CO₂ emission was investigated. At first, the transportation of import-export container cargo, the transport share of each transport route, the CO₂ gas emission, the sacrifice model and the time value of import-export container cargo were investigated. And next, the selection of transport route based on the sacrifice model was investigated for the transport of import-export container cargo from Seoul to Pusan Port. Finally, the transport route was also selected by using the sacrifice model including the effect of CO₂ emission. The research results show that the transport route selection results of import-export container cargo based on the sacrifice model represents the present status of the transportation of import-export container cargo very well. And also the research results show that the reduction of transport time was very effective to increase the share of coastal transportation.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.109-118
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV. So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.57-63
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV, So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets,

• Journal of Radiation Industry
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2023

Abstract KOMAC(Korea Multi-Purpose Accelerator Complex, KAERI) has been operating a 100 MeV proton accelerator and is going to produce ⁶⁸Ga isotope which is useful for diagnosis of cancer. So, it is necessary to develop a transport container for radio-activated targets. In this study, we carry out shielding analysis and structural analysis for the radio-activated target transport container using simulation programs. According to the Type A standard, the transport container includes an inner container and an overpack container. The main material of inner container is lead, and the shape is cylindrical with diameter of 152mm, height of 142mm and weight about 29 kg. It is planned to verify the possibility of field application through production of the transport container prototype in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.304-310
• /
• 2003

In this paper, we investigate the selection of transport route for import-export container cargo based on the sacrifice model and environmental cost of transport route. At first, sacrifice model. environmental cost of transport, the transportation and the transport share of import-export container cargo are investigated briefly. And next, the transport time and cost, the environmental cost which is caused by cargo transport are investigated for the transport of import-export container cargo from Pusan Port to Seoul. And also we calculate the sacrifice of each route by using the sacrifice model including the environmental cost. Finally we decide the transport route of import-export container cargo by using the sacrifice of each transport route. From the research results, we confirm that the road transport share decreases and the coastal transport share increases when the environmental coast of transport is considered.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.155-162
• /
• 2003

In this paper, we investigate the selection of transport route for import-export container cargo based on the sacrifice model and environmental cost of transport route. At first, the sacrifice model, environmental cost of transport, the volumes and the transport share of import-export container cargo are investigated briefly. And next, the transport time and cost, the environmental cost which is caused by cargo transport are investigated for the transport of import-export container cargo from Busan Port to Seoul. And also we calculate the sacrifice of each route by using the sacrifice model including the environmental cost. Finally we decide the transport route of import-export container cargo by using the sacrifice of each transport route. From the research results, we confirm that the road transport share decreases and the coastal transport share increases when the environmental coast of transport is considered.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.891-897
• /
• 2004

This paper provided a simulation model for transport vehicles that carry container from the ship to yard block and vice versa at automated container terminal with a perpendicular yard layout. Usually, the efficiency of container terminal is evaluated by the productivity of container cranes at apron, and the stevedoring system for transport vehicles and yard cranes should be supported enough to improve productivity of container cranes. Especially, transport vehicle is very important factor in the productivity of container cranes and the performance of transport vehicles are changed according to the number and traveling type of vehicles. For these reason, a method that can estimate productivity of transport vehicle is required Finally, we developed the simulation model to analyze the productivity of transport vehicle and presented the productivity of container cranes for a varying operation of transport vehicles.

• Journal of Korean Port Research
• /
• v.5 no.1
• /
• pp.29-54
• /
• 1991

In this study, to identify the ineffectiveness of inter-connected system of cargo volume between the Pusan Port and inland areas and also to make more rational suggestions, the following conclusions were drawn by analyzing Container Cargo Traffic from BCTOC to Off-Dock CY: 1. There existed about 30% to 50% reduction in the container transport times when the container transport vehicles were operated during the off-peak period to alleviate the traffic congestion due to mixed traffic. 2. There appeared to be more economic when Off-Dock DY's scattered around the City of Pusan were unified in one ODCY Unit at YangSan, and the Exclusive Overpass Freeway System for the container transport vehicles were constructed and operated on the existing Urban Freeway from BCTOC ti this ODCY Unit (Expected to make about 230 billions Won in net present value by NPV method).