• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.453-460
• /
• 2011

The inland logistics center is a large scale of logistics facility that enables roads, rails, ports, and airports to carry out chained-transports and combined-transports, and the logistics center are established at the main logistics posts in order to reduce the cost of transport by mass transportation. However, it is expected that the capacity of Euiwang ICD, the only inland logistics centers in the capital area, will reach its limit before 2015, so it is required to establish another stations or to improve the existing facility. Especially, in case of Euiwang ICD, the expansion of the center is not possible because of its position, so it is required to establish new logistics centers in other places in order to raise the capacity of transport. Therefore, this study suggests to establish new metropolitan logistics centers on the western coast line in order to solve the problem of shortage of tract capacity that is brought on by the newly established inland logistics centers on the axis of the western coastline (Song-san Station and An-jung Station), and analyzes how the new logistics center will distribute railroad cargoes. By these, this study contributes to reduce the cost of transport by providing smooth railroad transport service.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.133-146
• /
• 2010

The objective of this study is to develop a supply chain-based freight distribution channel choice model considering shippers' logistics behaviors which will be used for freight demand estimation. For this purpose, this study utilized the distribution channel data of the petrochemical and automobile industries collected by KTDB center. The distribution channel choice models for these industries were developed by including transport mode, time, cost, and shipment size. It was found that the multinomial logit model with transport cost, time and shipment size is the best, and as shipment increases, bigger transport mode is preferred. Generally direct distribution channel with small truck was preferred over the one using distribution center and/or big truck.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.24-30
• /
• 2016

In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.253-259
• /
• 2007

Standard design and suitable environmental test method should be applied to increase the reliability of UAV flight control systems. UAV flight control systems under development domestically have enough capabilities for complicated missions. However, most low cost systems are not designed with concepts of compatibility, adaptability, and environmental compliance. This paper explains ATR(Air Transport Rack) standard that is widely used on aircraft. The paper presents a design uses commercial off-the-shelf parts. The paper also presents various environmental standards for airborne equipments, including U.S. military specifications. The developed FCS was tested under these specifications. The paper shows the test procedures and results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.82-96
• /
• 2020

The Demand Responsive Transit (DRT) system is the flexible public transport service that determines the route and schedule of the service vehicles according to users' requests. With increasing importance of public transport systems in urban areas, the development of stable and fast routing algorithms for DRT has become the goal of many researches over the past decades. In this study, a new heuristic method is proposed to generate fast and efficient routes for multiple vehicles using demand clustering and destination demand priority searching method considering the imbalance of users' origin and destination demands. The proposed algorithm is tested in various demand distribution scenarios including random, concentration and directed cases. The result shows that the proposed method reduce the drop of service ratio due to an increase in demand density and save computation time compared to other algorithms. In addition, compared to other clustering-based algorithms, the walking cost of the passengers is significantly reduced, but the detour time and in-vehicle travel time of the passenger is increased due to the detour burden.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4137-4141
• /
• 2021

As NPPs continue to operate, liquid waste continues to be generated, and containers are needed to store and transport them at low cost and high capacity. To transport and store liquid phase very low-level radioactive waste (VLLW), a container is designed by considering related regulations. The design was constructed based on the existing container design, which easily transports and stores liquid waste. The radiation shielding calculation was performed according to the composition change of barium sulfate (BaSO₄) using the Monte Carlo N-Particle (MCNP) code. High-density polyethylene (HDPE) without mixing the additional BaSO₄, represented the maximum dose of 1.03 mSv/hr (<2 mSv/hr) and 0.048 mSv/hr (<0.1 mSv/hr) at the surface of the inner container and at 2 m away from the surface, respectively, for a 10 Bq/g of ⁶⁰Co source. It was confirmed that the dose from the inner container with the VLLW content satisfied the domestic dose standard both on the surface of the container and 2 m from the surface. Although it satisfies the dose standard without adding BaSO₄, a shielding material, the inner container was designed with BaSO₄ added to increase radiation safety.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.10
• /
• pp.265-275
• /
• 2022

In the current fast-growing market economy, the accounting-outsourcing trend of small and medium-sized enterprises is on the increase. Studies from both foreign and domestic sources have shown that many factors influence this decision. However, each country has different economic and political characteristics, so these factors and their degree of impact on accounting outsourcing also vary. This study aimed to determine the factors affecting the decision to outsource accounting activities of small and medium transport enterprises in Vietnam. A survey of 384 transport SMEs was conducted using the convenience sampling method. A personal interview with owners/managers/CFOs in 3 major cities of Vietnam based on a research review was conducted. The model examines the influence of many independent variables on accounting outsourcing. The multilinear regression analysis shows that the higher the Assets Specificity, the lower the degree of accounting outsourcing. In addition, the degree of outsourcing is positively and significantly related to frequency and trust in accountants. Besides, when we include control variables such as gender, administrative level, firm size, company age, education, and experience into the model. The results show that small and medium enterprises with limited resources should switch from the traditional internal accounting method to a professional accountant with external knowledge. Based on this study, the author proposes several implications for the accounting outsourcing of small and medium-sized transport enterprises in Vietnam to be more effective. Finally, this study also contributes to the basic knowledge of accounting outsourcing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.52-64
• /
• 2023

This paper concentrated on estimating the travel time value of individual regional bus passengers in various in-vehicle crowding conditions. In the analysis model, the traffic-selection data of individual transportation passengers based on smart-card data were used. Variables which reflect the level of in-vehicle crowding and the variables of in-vehicle travel time that reflect the level of in-vehicle crowding were included in the model using Box-Cox transformation. The result of this paper indicates that the travel time value experienced by individual users would increase as the in-vehicle crowding level increases. The smart card data used in this paper is considered to have significant implications in terms of conducting more sophisticated and realistic qualitative research to reflect the values of variables for in-vehicle traffic hours and in-vehicle crowding levels, which previously had limitations in observation and quantification. It is expected that the effects of improvement measures for reducing congestion on regional buses can be considered quantitatively by applying the estimation results of crowding multiplier.

• Korean Journal of Organic Agriculture
• /
• v.13 no.2
• /
• pp.129-143
• /
• 2005

Attempting to make an economic valuation of semi-liquid manure raises various complex questions. These are the valuation under different farming conditions, cost-benefit analysis in connection with the investment requirements of different semi-liquid manure systems, different storage capacities, transportation distances and treatment procedures. In the following, there questions will be discussed : 1. What value do the different types of semi-liquid manure have under different farming conditions? 2. Which storage capacities are economically justified? 3. Under which conditions is the transport of semi-liquid manure over long distances profitable?

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.211-214
• /
• 2004

In railway system, the transportation plan corresponds to master plan for transport services. This service plan must be constructed to minimize operational cost or maximize revenue considering transportation demands and resource capacities in the operation company, and includes several sub-planning activities such as train operation frequency plan, train (schedule) plan, train capacity assignment plan, and rolling stock requirement plan. In this paper, we present profitability evaluation system for current transportation plan. The proposed system can be used for evaluating profitability by estimating train service revenue considering customer demands.