• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.53.2-53.2
• /
• 2011

Dye-sensitized solar cells(DSSCs) have been recognized as an alternative to the conventional p-n junction solar cells because of their simple fabrication process, low production cost, and transparency. A typical DSSC consists of a transparent conductive oxide (TCO) electrode, a dye-sensitized oxide semiconductor nanoparticle layer, liquid redox electrolyte, and a Pt-counter electrode. In dye-sensitized solar cells, charge recombination processes at interfaces between coducting glass, $TiO_2$, dye, and electrolyte play an important role in limiting the photon-to-electron conversion efficiency. A layer of ZTO thin film less than ~200nm in thickness, as a blocking layer, was deposited by DC magnetron sputtering method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells(DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte ($I^-/I_3^-$). The presented DSCs were fabricated with working electrode of Ga-doped ZnO glass coated with blocking ZTO layer, dye-attached nanoporous $TiO_2$ layer, gel electrolyte and counter electrode of Pt-deposited GZO glass. The effects of blocking layer were studied with respect to impedance and conversion efficiency of the cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.389-389
• /
• 2011

Transparent conductive oxide (TCO) 박막은 디스플레이 및 태양전지 등 광범위한 분야에서 적용되고 있으며, 특히 indium tin oxide (ITO)는 낮은 전기적 저항과 우수한 광투과도를 가지고 있어서 이미 많은 분야에 적용되고 있다. 본 연구는 RF와 DC를 혼용한 마그네트론 스퍼터링 공정을 활용하여 ITO 박막 특성 및 이를 활용한 유기태양전지 적용에 관한 것이다. UV-O3 처리된 glass 기판위에 thermal evaporation 방식으로 밀착력을 높이기 위하여 Cr을 5 nm 두께로 증착한 후 Al을 95 nm 증착하였다. 그 위에 스퍼터링 공정으로 ITO 박막을 In2O3:SnO2 target (10wt% SnO2)을 사용하여 1.0 mTorr의 공정압력(Ar:O2=30:1), 50W의 RF power 및 0.11kW의 DC power에서 50~250 nm의 두께로 증착하였다. ITO 박막의 결정구조 및 표면 형상은 x-ray diffraction (XRD) 및 scanning electron microscope (SEM)을 사용하여 분석하였으며, 전기적 특성은 four-point probe법으로 비저항값을 측정하였다. 또한 높은 광변환효율을 가지는 태양전지 제작을 위하여, 다양한 두께의 ITO 박막을 사용하여 ITO/ZnO/P3HT:PCBM/PEDOT/Ag 구조의 유기태양전지를 제작하여 소자 특성을 최적화 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.107-112
• /
• 2007

Aluminum doped zinc oxide (AZO) films were deposited on non-alkali glass substrate by DC magnetron sputtering with 3 types of AZO targets (doped with 1.0 wt%, 2.0 wt%, 3.0 wt% $Al_2O_3$). Electrical, optical properties and microstructure of AZO films have been investigated by Hall effect measurements, UV/VIS/NIR spectrophotometer, and XRD, respectively. Crystallinity of AZO films increased with increasing substrate temperature ($T_s$) and doping ratio of Al. Resistivity and optical transmittance in visible light were $8.8{\times}10^{-4}{\Omega}cm$ and above 85%, respectively, for the AZO film deposited using AZO target (doped with 3.0 wt% $Al_2O_3$) at $T_s$ of $300^{\circ}C$. On the other hand, transmittance of AZO films in near-infrared region decreased with increasing $T_s$ and doping ratio of Al, which could be attributed to the increase of carrier density.

• Journal of the Korean Ceramic Society
• /
• v.52 no.3
• /
• pp.224-227
• /
• 2015

In this work, the properties of Indium-Zinc-Tin-Oxide (IZTO) thin films, deposited on polyethylene naphthalate (PEN) with a $SiO_2$ buffer layer, were analyzed with different working pressures. After depositing the $SiO_2$ buffer layer on PEN substrates by plasma-enhanced chemical vapor deposition (PECVD), the IZTO thin films were deposited by RF magnetron sputtering with 1 to 7-mTorr working pressure. All the IZTO thin films show an amorphous structure, regardless of the working pressure. The best morphological, electrical, and optical properties are obtained at 3-mTorr working pressure, with a surface roughness of 2.112-nm, a sheet resistance of $8.87-{\Omega}/sq$, and a transmittance at 550-nm of 88.44%. These results indicate that IZTO thin films deposited on PEN have outstanding electrical and optical properties, and the PEN plastic substrate is a suitable material for display devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.439-440
• /
• 2008

Indium Zinc Tin Oxide (IZTO) thin films for transparent thin film transistor (TTFT) were deposited on glass substrate at room temperature by facing targets sputtering (FTS). The FTS system was designed to array two targets facing each other and forms the high- density plasma between. Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90wt.%, $SnO_2$ 10wt.%), the other is IZO($In_2O_3$ 90wt%, ZnO 10wt%). The conductive and optical properties of IZTO thin film is determined depending on variation of DC power and working pressure. Therefore, IZTO thin films were prepared with different DC power and working pressure. As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), a scanning electron microscopy (SEM), a Hall Effect measurement system. As a result, all IZTO thin films deposited on glass substrate showed over 80% of transmittance in visible range (400~800 nm) at $O_2$ gas flow rate. We could obtain IZTO thin films with the lowest resistivity $5.67\times10^{-4}$ [$\Omega{\cdot}cm$] at $O_2$ gas flow rate 0.4 [sccm).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.417-418
• /
• 2008

Transparent conductive oxide (TCO) are necessary as front electrode or anti-reflecting coating for increasing efficiency of LED and Photodiode. In this paper, aluminum-doped Zinc oxide films(AZO) were prepared by DC magnetron sputtering on glass(corning 1737) and Si substrate at temperature of $100^{\circ}C$ and then annealed at temperature of $400^{\circ}C$ for 1hr in Ar and vaccum. The AZO films were etched in diluted HCL (0.5 %) to examine the surface morphology properties. After annealing, Structural and electrical property were investigated. The c-axis orientation along (002) plane was enhanced and the electrical resistivity of the AZO film decreased from $1.1\times10^{-1}$ to $1.6\times10^{-2}{\Omega}cm$. We observed textured structure of AZO thin film etched for 2s.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.192-192
• /
• 2010

Transparent Conductive Oxides (TCO) 박막은 지금 까지 산업 전반에 걸쳐 많이 응용되어 사용되어지는 박막 중에 하나이다. 그대표적인 산업은 디스플레이 산업 중 평면디스플레이 산업에서 투명 전극으로 사용하는 LCD 및 터치패널에 사용되는 전극으로 사용되어져 왔다. 현재에는 솔라 셀의 전극 및 기판으로서의 응용이 많이 연구되어지고 있다. 이와 같은, 산업에서 사용되는 투명전극 재료는 낮은 전기적 특성 및 애칭특성이 우수하고 높은 광 투과도를 필요로 하고 있으며, 이러한 특성을 모두 만족하며 가장 우수한 물성을 나타내는 물질이 (Indium Tin Oxide) film이다. 하지만 Indium의 고갈과 희소성에 따른 고가라는 점의 문제로 인해 대체재료로써 부상되고 있는 ZnO의 연구가 활발히 진행되고 있다. 본 연구에서는 투명 전도성 산화물인 ZnO박막과 Al이 도핑된 AZO박막을 저온공정이 가능한 대향 타겟식 스퍼터링 방법(FTS)을 이용하여 산소가스 분압과 Al타겟에 인가되는 Current에 따른 박막의 전기적, 광학적 특성을 파악하여 적용여부에 대해 조사하였다. ZnO박막의 결정성은 유입되는 산소가스의 유량에 따라 증가하며 일정 영역이상에서는 감소하였다. 산소가스 유량이 1.2 sccm일 때 가장 높은 결정성을 얻었다. 또한 산소가스 유량을 1.2 sccm으로 고정시킨 후 Al타겟에 인가되는 Current에 변화를 주었을 때 0.5A에서 가장 낮은 비저항을 얻었다. ZnO박막의 미세구조는 Xray-diffraction method를 이용하여 측정하였고, 산소 분압에 따른 표면조도 분석을 위해 AFM을 사용하였고 Zn와 Oxide bonding의 화학적 분석을 위해 XPS를 이용하여 분석하였다. 또한 전기적 특성은 Hall measurement, 광 투과도는 UV-VIS Spectrometer를 이용하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.1116-1125
• /
• 2023

Zinc oxide film is a transparent conductive material and is used in optoelectronic devices in various fields. Therefore, characterization of the zinc oxide film will play a very important role in improving the performance of optoelectronic devices. Here, we will evaluate the morphological and structural characteristics of such a zinc oxide film based on the solution process. Specifically, the sol-gel method will be repeatedly performed to observe the change in material properties of the zinc oxide film according to the number of times of spin-coating. It was confirmed that crystallization proceeded as a result of performing the sol-gel method repetitively 5 times under constant solution conditions. At 7 times or more, the element composition and crystallinity tended to converge to a specific value. The average crystal size of the final zinc oxide film was calculated to be about 10.7 nm. In this study, the number of processes showing optimal crystallization was 7 times. The results and methodology of this study can be applied while varying various solution process variables and are expected to contribute to establishing optimal process conditions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.36.1-36.1
• /
• 2010

While the substrate-type solar cells with Cu(In,Ga)Se2 absorbers yield conversion efficiencies of up 20%[1], the highest published efficiency of Cu(In,Ga)Se2 superstrate solar cell is only 12.8% [2]. The commerciallized Cu(In,Ga)Se2 solar cells are made in the substrate configuration having the stacking sequence of substrate (soda lime glass)/back contact (molybdenum)/absorber layer (Cu(In,Ga)Se2)/buffer layer (cadmium sulfide)/window layer (transparent conductive oxide)/anti reflection layer (MgF2) /grid contact. Thus, it is not possible to illuminate the substrate-type cell through the glass substrate. Rather, it is necessary to illuminate from the opposite side which requires an elaborate transparent encapsulation. In contrast to that, the configuration of superstrate solar cell allows the illumination through the glass substrate. This saves the expensive transparent encapsulation. Usually, the high quality Cu(In,Ga)Se2 absorber requires a high deposition temperature over 550C. Therefore, the front contact should be thermally stable in the temperature range to realize a successful superstrate-type solar cell. In this study, it was tried to make a decent superstrate-type solar cell with the thermally stable ZnO:Al layer obtained by adjusting its deposition parameters in magnetron sputtering process. The effect of deposition condition of the layer on the cell performance will be discussed together with hall measurement results and current-voltage characteristics of the cells.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.85-91
• /
• 2005

$SnO_2$ films were prepared at room temperature under a $(CH_3)_4Sn-H_2-O_2$ atmosphere in order to obtain transparent conductive polymer by using ECR-MOCVD (Electron Cyclotron resonance -Metal Organic Chemical Vapor Deposition) system. The electrical properties of the films were investigated as function of process parameters such as deposition time, microwave power, magnetic current power, magnet/showering/substrate distance and working pressure. An increase in microwave power and magnetic current power brought on $SnO_2$ film formation with low electric resistivity. On the other hand, the effects of process parameters described above on optical properties were insignificant in the range of our experimental scope. The transmittance and reflectance of the films prepared by the ECR-MOCVD exhibited their average values of 93-98% at wave length range of 380-780 nm and 0.1-0.5%, respectively. The grain size of the $SnO_2$ films that are also insensitive with the process parameters were in the range of 20-50 nm. On the basis of experimental data obtained in the present study, electrical resistivity of $7.5{\times}10^{-3}ohm{\cdot}cm$, transmittance of 93%, and reflectance of 0.2% can be taken as optimum values.