• Journal of Biomedical Engineering Research
• /
• v.30 no.1
• /
• pp.18-22
• /
• 2009

Laser has been widely used in various fields of medicine. Recently, noninvasive low-level laser therapeutic medical devices have been introduced in market. However, low-level laser cannot deliver enough photon density to expect positive therapeutic results in deep tissue layer due to the light scattering property in tissue. In order to overcome the limitation, this study was aimed to develop a negative pressure applied low-level laser probe to optimize laser transmission pattern and therefore, to improve photon density in soft tissue. In order to evaluate the possibility of clinical application of the developed laser probe, ex-vivo experiments were performed with porcine skin samples and laser transmissions were quantitatively measured as a function of tissue compression. The laser probe has an air suction hole to apply negative pressure to skin, a transparent plastic body to observe variations of tissue, and a small metallic optical fiber guide to support the optical fiber when negative pressure was applied. By applying negative pressure to the laser probe, the porcine skin under the metallic optical fiber guide is compressed down and, at the same time, low-level laser is emitted into the skin. Finally, the diffusion images of laser in the sample were acquired by a CCD camera and analyzed. Compared to the peak intensity without the compression, the peak intensity of laser increased about $2{\sim}2.5$ times and FWHM decreased about $1.67{\sim}2.85$ times. In addition, the laser peak intensity was positively and linearly increased as a function of compression. In conclusion, we verified that the developed low-level laser probe can control the photon density in tissue by applying compression, and therefore, its potential for clinical applications.

• Journal of the Korean Society of Costume
• /
• v.52 no.5
• /
• pp.61-77
• /
• 2002

The purpose of this study is to investigate difference and likeness on the form in women's Hanbok between the later Chosun Dynasty and modern times based on Belong's observing system for 'Apparel-Body Construct'. Belong's framework is composed 5 pairs of contrast word -'Closed or Open', 'Whole or Par', 'Planar Separation or Planar integration'. 'Flat or Rounded', and 'Determinate or Indeterminate'. Major findings of this study are as follows. First, the form of women's Hanbok in later Chosun Dynasty is 'Variably Closed', 'Part' and 'Rounded', whereas that in modern is 'Open', 'Whole' and 'Flat' Women's Hanbok of modern is lesser convex, and more open than that of later Chosun Dynasty according to increasing use of transparent textiles. Moreover, in comparison with old style, that of modern has the tendency of perceiving primarily whole feature by organic linkage of parts. Because of loose fit of Jeogori and rigid DongJong etc, characteristic of 'Plat' strengthened in modern Hanbok. Secondly, women's Hanbok in the later Chosun Dynasty and modern has common properties of 'Planar Seperation' and 'Determinate'. Women's Hanbok belongs to 'Planar Seperation', because the effect cognized to figure and ground. can be found between small parts and whole of Jegori, or can be found between the head and face. Jeuori and waist band, and Chima and under ware. Further more. it can be classified into 'Determinate'. because it use textiles which have no pattern un it or which show a subtle surface effect by texture changing.

• Development and Reproduction
• /
• v.20 no.1
• /
• pp.31-40
• /
• 2016

This study was conducted in order to examine the egg development in red spotted grouper, Epinephelus akaara and the morphological development of its larvae and juveniles, and to obtain data for taxonomic research. This study was conducted in June 2013, and 50 male and female fish were used for the study. One hundred ${\mu}g/kg$ of LHRHa was injected into the body of the fish for inducing spawning, and the fish were kept in a small-sized fish holder ($2{\times}2{\times}2m$). Eggs were colorless transparent free pelagic eggs, 0.71-0.77 mm large (mean $0.74{\pm}0.02mm$, n=30), and had an oil globule. Hatching started within 27 h after fertilization. Pre-larvae that emerged just after hatching were 2.02-2.17 mm in total length (mean $2.10{\pm}0.11mm$), their mouth and anus were not opened yet, and the whole body was covered with a membrane fin. Post-larvae that emerged 15 days post hatching were 3.88-4.07 mm in total length (mean $3.98{\pm}0.13mm$), and had a ventral fin with two rays and a caudal fin with eight rays. Juveniles that were formed at 55 d post hatching, were 31.9-35.2 mm in total length (mean $33.6{\pm}2.33mm$), with red color deposited over the entire body, and black chromophores deposited in a spotted pattern. The number of fin rays, body color, and shape were the same as that in the adult fish.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.113.1-113.1
• /
• 2011

PEMS (printed electro-mechanical system) is fabricated by means of various printing technologies. Passive and active compo-nents in 2D or 3D such as conducting lines, resistors, capacitors, inductors and TFT(Thin Film Transistor), which are printed withfunctional materials, can be classified in this category. And the issue of PEMS is applied to a R2R process in the manu-facturing process. In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem, it is difficult to apply to a continuous process such as a R2R(roll to roll) printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, an electrostatic atomizer sprays micro-drops from the solution injected into the capillary with electrostatic force generated by electric potential of about several tens kV. ESD method is usable in the thin film coating process of organic materials and continuous process as a R2R manufacturing process. Therefore, we experiment the thin films forming of PEDOT:PSS layer and active layer which consist of the P3HT:PCBM. The organic solar cell based on a P3HT/PCBM active layer and a PEDOT:PSS electron blocking layer prepared from ESD method shows solar-to-electrical conversion efficiency of 1.42% at AM 1.5G 1sun light illumination, while 1.86% efficiency is observed when the ESD deposition of P3HT/PCBM is performed on a spin-coated PEDOT:PSS layer.

• The Journal of Korea Robotics Society
• /
• v.7 no.4
• /
• pp.259-266
• /
• 2012

In these days, researches about underwater robots have been actively in progress for the purposes of ocean detection and resource exploration. Unlike general underwater robots such as ROV(Remotely Operated Vehicle) and AUV(Autonomous Underwater Vehicle) which have propellers, an articulated underwater robot which is called Crabster has been being developed in KORDI(Korea Ocean Research & Development Institute) with many cooperation organizations since 2010. The robot is expected to be able to walk and swim under the sea with its legs. Among many researching fields of this project, we are focusing on a swimming section. In order to find effective swimming locomotion for the robot, we approached this subject in terms of Biomimetics. As a model of optimized swimming organism in nature, diving beetles were chosen. In the paper, swimming motions of diving beetles were analyzed in viewpoint of robotics for applying them into the swimming motion of the robot. After modeling the kinematics of diving beetle through robotics engineering technique, we obtained swimming patterns of the one of living diving beetles, and then compared them with calculated optimal swimming patterns of a robot leg. As the first trial to compare the locomotion data of legs of the diving beetle with a robot leg, we have sorted two representative swimming patterns such as forwarding and turning. Experimental environment has been set up to get the motion data of diving beetles. The experimental equipment consists of a transparent aquarium and a high speed camera. Various swimming motions of diving beetles were recorded with the camera. After classifying swimming patterns of the diving beetle, we can get angular data of each joint on hind legs by image processing software, Image J. The data were applied to an optimized algorithm for swimming of a robot leg which was designed by robotics engineering technique. Through this procedure, simulated results which show trajectories of a robot leg were compared with trajectories of a leg of a diving beetle in desired directions. As a result, we confirmed considerable similarity in the result of trajectory and joint angles comparison.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.219-230
• /
• 2004

The aims of this study are to construct database using geostatistics and Geographic Information System (GIS), and to derive the spatial relationships between manganese nodule abundance and each factor affecting nodule abundance, such as metal grade, slope, aspect, water depth, topography, and acoustic characteristics of the subbottom using the GIS and probability methods. The greater is the copper and nickel grade, the higher is the rating. The distribution pattern of nickel grade is similar to that of copper grade. The slopes are generally less than $3^{\circ}$, excluding seamounts and cliff areas. There is no increment in the rating with increasing slope. The rating is highest for slopes between 2.5 and $3.5^{\circ}$ in block B2 and between 3 and $6^{\circ}$ in block C1. The topography is classified into five groups: seamount, hill crest, hill slant, hill base or plain, and seafloor basin or valley. The ratings prove lowest for seamount and hill crest. The results of the study show a decrease in the rating with an increase in water depth in the study area. There was a poor relationship between manganese nodule abundance and the thickness of the upper transparent layer in block C1. Using GIS, it is possible to analyze a large amount of data efficiently, and to maximize the practical application, to increase specialization, and to enhance the accuracy of the analyses.

• Korean Journal of Cognitive Science
• /
• v.14 no.4
• /
• pp.9-19
• /
• 2003

Bonneh, Cooperman and Sagi (2001) reported that when a global moving pattern was superimposed on high-contrast stationary stimuli, the latter disappeared and reappeared alternatively for periods of several seconds. They named this as motion-induced-blindness. In present research a rotating transparent cylinder composed of white dots was superimposed on a stationary green dots. When observers watched these stimuli wearing a red filter on his/her right eye, the stationary green dots disappeared or reappeared as did in Bonneh et al. The new MIB was observed only when the cylinder rotated and observers weared a red filter. As the luminance contrast of the green dots and that of white dots against the background reduced, and as the number of green dots and white dots decreased, the duration of MIB reduced. Also, the relative depth of the rotating cylinder and the stationary green dots affected the duration of MIB. These results imply that the new MIB is different from the MIB which was observed by Bonneh et al and that the new MIB cannot be explained by binocular rivalry. Further more, the results imply that the later stage of visual information processing is involved in the new MIB.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.157-176
• /
• 1995

The purpose of this treatise is to study external form and internal meaning of minimal expression fashion which appeared as a major stream in modern fashion trends to understand one aspect of modernism in fashion and also to gain insight into internal value of human beings through fashion. The results can be summarized as follows : Firstly , minimalism is a trend in art attempting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means and minimal production process. Secondly, minimal expression in fashion means seeking simplicity an dpurity by using minimum design elements and minimal productive process. Thirdly, external from of minimal expression fashion can be created through application of following minimal expression techniques. 1. Minimal expression techniques in terms of line mean smooth curve flowing along body contours, straight lines of diagonal lines into desciplined silhouette or rendering internal contour lines. 2. Minimum expression techniques in terms of forms mean forms of smooth curves flowing along boyd or forms with simple geometric forms from qualitative aspects, In terms of volume it means quest for essence of pure body itself by revealing body as it is by minimizing the size of dress or its area and herein is contained using simple geometric pattern or utilizing textiles without any patterns.3. Minimal expression techniques by colors mean simple colors such as primary colors, colors without clear distinctions or natural colors and in terms of quantity it means quest for one color within one item of dress or combination of each items when getting dressed. 4. Minimal expression techniques in terms of fabrics mean fabrics with simple surfaced. In terms of quantity it means quest for essence of tight fitting thin textiles to human body or using transparent materials to human body thus exposing body contours as it is. 5. Minimal expression techniques in terms of productive process mean minimizing process of tailoring , sewing or ornamenting and seeking for simplicity and purity. 6. Minimal expression techniques in terms of manufacturing process mean selection of technique conveying simple image with disciplined simple image. Fourthly, minimal expression fashion with external expression as mentioned in the above lay body-priority style and its internal meaning can be asummed as quest for essence and purity of human body.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.1-13
• /
• 2018

A series of experiments using transparent micromodels with an artificial pore network etched on glass plates was performed to investigate the effects of flow rate on the migration and distribution of resident wetting porewater (deionized water) and injecting non-wetting fluid (n-hexane). Multicolored images transformed from real RGB images were used to distinguish n-hexane from porewater and pore structure. Hexane flooding followed by immiscible displacement with porewater, migration through capillary fingering, preferential flow and bypassing were observed during injection experiments. The areal displacement efficiency increases as the injection of n-hexane continues until the equilibrium reaches. Experimental results showed that the areal displacement efficiency at equilibrium increases as the flow rate increases. Close observation reveals that preferential flowpaths through larger pore bodies and throats and clusters of entrapped porewater were frequently created at lower flow rate. At higher flow rate, randomly oriented forward and lateral flowpaths of n-hexane displaces more porewater at an efficiency close to stable displacement. It may resulted from that the pore pressure of n-hexane, at higher flow rate, increases fast enough to overcome capillary pressure acting on smaller pore throats as well larger ones. Experimental results in this study may provide fundamental information on migration and distribution of immiscible fluids in subsurface porous media.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.431-431
• /
• 2011

Graphene, two dimensional sheet of sp2-hybridized carbon, has attracted an enormous amount of interest due to excellent electrical, chemical and mechanical properties for the application of transparent conducting films, clean energy devices, field-effect transistors, optoelectronic devices and chemical sensors. Especially, graphene is promising candidate to detect the gas molecules and biomolecules due to the large specific surface area and signal-to-noise ratios. Despite of importance to the disease diagnosis, there are a few reports to demonstrate the graphene- and rGO-FET for biological sensors and the sensing mechanism are not fully understood. Here we describe scalable and facile fabrication of rGO-FET with the capability of label-free, ultrasensitive electrical detection of a cancer biomarker, prostate specific antigen/${\alpha}1$-antichymotrypsin (PSA-ACT) complex, in which the ultrathin rGO sensing channel was simply formed by a uniform self-assembly of two-dimensional rGO nanosheets on aminated pattern generated by inkjet printing. Sensing characteristics of rGO-FET immunosensor showed the highly precise, reliable, and linear shift in the Dirac point with the analyte concentration of PSA-ACT complex and extremely low detection limit as low as 1 fg/ml. We further analyzed the charge doping mechanism, which is the change in the charge carrier in the rGO channel varying by the concentration of biomolecules. Amenability of solution-based scalable fabrication and extremely high performance may enable rGO-FET device as a versatile multiplexed diagnostic biosensor for disease biomarkers.