• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.399-412
• /
• 2008

The 21st century has been changed into a knowledge-oriented society, which means our society is more dependent on information and moves toward information. The mixing of broadcasting and co mmunication prevails and it makes possible a new type of broadcasting service. Depending on that, a broadcasting is being changed into a consumer-oriented service to satisfy the demands of consum ers in a new media age. It makes us attain to the personal media age to be possible interactive com munication unlike existing one-way transmission. As a result, new complex media are commercialize d and the instance is DMB. DMB is said 'my own TV' or 'TV in my own hands'. But it has limit t o retransmit existing broadcast programs. So hereafter, DMB broadcasting must be produced with co ntents suited its properties out of retransmitting existing contents. It is necessary to analyze exactly properties and service fields of DMB media to make an establish production direction of contents for DMB. This paper intends to suggest overall optimized image-contents production direction including appropriate program developments, a proper running time, visual expressions such as a camera angle and walking etc... DMB contents suited with its properties will give more familiarities to DMB users. Besides, DMB is expected to be a new culture watching broadcasting.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1659-1663
• /
• 2003

$Al_2O_3$ thin films were grown on H-terminated Si(001) substrates using dimethylaluminum isopropoxide [DMAl: $(CH_3)_2AlOCH(CH_3)_2$], as a new Al precursor, and water by atomic layer deposition (ALD). The selflimiting ALD process by alternate surface reactions of DMAI and $H_2O$ was confirmed from measured thicknesses of the aluminum oxide films as functions of the DMAI pulse time and the number of DMAI-$H_2O$ cycles. Under optimal reaction conditions, a growth rate of ~1.06 ${\AA}$ per ALD cycle was achieved at the substrate temperature of $150\;^{\circ}C$. From a mass spectrometric study of the DMAI-$D_2O$ ALD process, it was determined that the overall binary reaction for the deposition of $Al_2O_3\;[2\;(CH_3)_2AlOCH(CH_3)_2\;+\;3\;H_2O\;{\rightarrow}\;Al_2O_3\;+\;4\;CH_4\;+\;2\;HOCH(CH_3)_2]$can be separated into the following two half-reactions: where the asterisks designate the surface species. Growth of stoichiometric $Al_2O_3$ thin films with carbon incorporation less than 1.5 atomic % was confirmed by depth profiling Auger electron spectroscopy. Atomic force microscopy images show atomically flat and uniform surfaces. X-ray photoelectron spectroscopy and cross-sectional high resolution transmission electron microscopy of an $Al_2O_3$ film indicate that there is no distinguishable interfacial Si oxide layer except that a very thin layer of aluminum silicate may have been formed between the $Al_2O_3$ film and the Si substrate. C-V measurements of an $Al_2O_3$ film showed capacitance values comparable to previously reported values.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2011

Recently, various researches have been proposed to accelerate GPU-based volume ray-casting. However, those researches may cause several problems such as bottleneck of data transmission between CPU and GPU, requirement of additional video memory for hierarchical structure and increase of processing time whenever opacity transfer function changes. In this paper, we propose an efficient GPU-based empty space skipping technique to solve these problems. We store maximum density in a brick of volume dataset on a vertex element. Then we delete vertices regarded as transparent one by opacity transfer function in geometry shader. Remaining vertices are used to generate bounding boxes of non-transparent area that helps the ray to traverse efficiently. Although these vertices are independent on viewing condition they need to be reproduced when opacity transfer function changes. Our technique provides fast generation of opaque vertices for interactive processing since the generation stage of the opaque vertices is running in GPU pipeline. The rendering results of our algorithm are identical to the that of general GPU ray-casting, but the performance can be up to more than 10 times faster.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1491-1497
• /
• 2013

Radio frequency identification (RFID) is an important and essential components of ubiquitous computing, with the development of wireless communication technologies and mobile computing environment. Recently, RFID becomes the mainstream application that helps fast handling and uniquely identifying the physical objects. It utilizes the electromagnetic energy for data transmission from a tag to a reader in the presence of arbitrary interference and noise. In order to employ the portable mobile RFID reader, a tag-collision problem between two or more adjacent tags should be considered. In this paper, we present the operation of RFID system in which numerous tags are present in the interrogation zone of a single reader at the same time. Since there may exist a number of tagged objects in the narrow area, multiple RFID tags may interfere each other, caused to degrade the data reliability and efficiency of the RFID system. In order to suppress interference signals from multiple neighboring tags, we present an application of Gold code for RFID communication system, which uses spread spectrum technique. In this RFID system, data bits are spreaded in each tags with the unique Gold code and the spreaded data bits are despreaded in the reader with the same Gold code. The performance analysis of the considered RFID anti-collision system is illustrated via computer simulation examples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.188-194
• /
• 2008

In this paper, we propose for improving QoS in Hospital wireless network using Cellular-IP/PRC(Paging Route Cache) with Paging Cache and Route Cache in Cellular-IP and propose for performance of realtime and non-real time handoff service using Handoff state machine Paging Route Cache. Although the Cellular-IP/PRC technology is devised for mobile internet communication, it has its vulnerability in frequent handoff environment. This handoff state machine using differentiated handoff improves quality of services in Cellular-IP/PRC Suggested algorithm shows better performance than existing technology in wireless mobile internet communication environment. When speech quality is secured considering increment of interference to receive in case of suppose that proposed acceptance method grooves base radio station capacity of transfer node is plenty, and moat of contiguity cell transfer node was accepted at groove base radio station with a blow, groove base radio station new trench lake acceptance method based on transmission of a message electric power estimate of transfer node be. Do it so that may apply composing PC(Paging Cache) and RC(Routing Cache) that was used to manage paging and router in radio Internet network in integral management and all nodes as one PRC(Paging Router Cache), and add hand off state machine in transfer node so that can manage hand off of transfer node and Roaming state efficiently, and studies so that achieve connection function at node. Analyze benevolent person who influence on telephone traffic in system environment and forecasts each link currency rank and imbalance degree, forecast most close and important lake interception probability and lake falling off probability, GoS(Grade of Service), efficiency of cell capacity in QoS because applies algorithm proposing based on algorithm use gun send-receive electric power that judge by looking downward link whether currency book was limited and accepts or intercept lake and handles and displays QoS performance improvement.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.312-318
• /
• 2008

In a pear fruit 'Chuhwangbae' was investigated the effect of the calcium-coated double paper bag on the physical properties of the paper bag, micro meteorological phenomena, and calcium contents in quality of fruit. The calcium-coated paper bag, compared with official paper bags, did not give any effect on light transmission ratio and tensile strength. The change of the inside relative humidity of the paper bag was a little compared with conventional paper bags, but there was no difference in temperature. The contents of the accumulated calcium of the pericarp was remarkably greater than conventional paper bags during the period of 65 days to 160 days after the full bloom, but the flesh remarkably increased at 160 days. The calcium content per concentration of calcium coating greatly increased in 12% of yellow double paper bags and 9, 12% of newspaper double paper bags in case of the pericarp, and in 3% of yellow double paper bags and 6, 9, 12% of newspaper double paper bags in case of the pericarp. As a result of treatment of a radioactive isotope, the amount of accumulated calcium in the pericarp continued until 60 hours after treatment, but there was no difference in the calcium amount between the flesh and no-treatment pericarp. As to the hardness of fruits at the time of harvest, there was no difference in the concentration in case of a yellow double bags. But newspaper double paper bags 6, 12% was significantly difference. Soluble solid remarkably increased in yellow double paper bags 6, 9% and yellow double paper bags 3, 6, 9%. Also, it did not effect on changes of the pericarp, fruit weight and the color of the pericarp.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.134-142
• /
• 2003

We present an ATM switch architectures based on the multistage interconnection network(MIN) for the efficient multicast traffic control. Many of these applications require multicast connections as well as point-to-point connections. Muiticast connection in which the same message is delivered from a source to arbitrary number of destinations is fundamental in the areas such as teleconferencing, VOD(video on demand), distributed data processing, etc. In designing the multicast ATM switches to support those services, we should consider the fairness(impartiality) and priority control, in addition to the overflow problem, cell processing with large number of copies, and the blocking problem. In particular, the fairness problem which is to distribute the incoming cells to input ports smoothly is occurred when a cell with the large copy number enters upper input port. In this case, the upper input port sends before the lower input port because of the calculating method of running sum, and therefore cell arrived into lower input port Is delayed to next cycle to be sent and transmission delay time becomes longer. In this paper, we propose the cell splitting and group splitting algorithm, and also the fairness scheme on the basis of the nonblocking characteristics for issuing appropriate copy number depending on the number of Input cell in demand. We evaluate the performance of the proposed schemes in terms of the throughput, cell loss rate and cell delay.

• Applied Microscopy
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2007

Monocrotaline (MCT) is a pyrrolizidine alkaloid (PA) plant toxin that produces hapatotoxicity in humans and animals. To felt the hypothesis, we investigated the possible protective effects of Haedokjeongki-tang as an antioxidant against MCT-induced liver injury in rats. Cells with apoptotic morphology have been observed in the livers of animals exposed to Ph and Haedokjeongki-tang. Whether apoptosis occurs in the livers of MCT-treated animals and whether it is required for full manifestation of pathological changes is not known, To determine this, rats were treated with 100 mg MCT/kg, and apoptosis was detected by transmission electron microscopy and TUNEL assay. MCT produced apoptosis in the liver by 6 h after treatment and increased by 24 h. Administration of Haedokjeongki-tang did affect liver structure and inhibit apopotosis in MCT-induced liver injury. Upon light and electron microscopic examination, we observed that Haedokjeongki-tang improved the morphological and histopathological changes of the liver caused by MCT-induced injury. MCT caused a time-dependent release of GOT and GPT, a marker of liver injury. Furthermore, we observed with respect to antioxidants status, catalase and superoxide dismutase activity tended to be higher in the MCT-treated rats than in the Haedokjeongki-tang administered rats. Our finding showed that Haedokjeongki-tang administration partially reduced liver injury after MCT exposure.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.8
• /
• pp.787-794
• /
• 2010

Recently, with sudden increase of supplying rate of cars and quantity of goods transported, traffic noisy becomes one of important factors obstruct environment of exhibition and view facilities have purpose in calmness and unsatisfaction about this is high now. Therefore, in case of exhibition and view facilities, it has to be grasped that satisfaction degree about the noisy in and out of the exhibition room by performing effect valuation on traffic noisy from design step. However the level of internal noise cannot be measured at the design phrase of the structure due to the noise of traffic. Up until now a walls transmission loss, based on the law of mass, is predicted using this method. However measuring the internal sound level after actual construction reveals that there is a large difference from measurements made at the design stage, and it is very difficult to find a solution after the opening of the structure. From research looking from this perspective the internal sound level was predicted- calculating the internal sound absorption ability, using acoustic simulation and loss prevention of an insulated wall- based on data collected to evaluate the internal sound of an exhibition room at a Folk Museum adjacent to a freeway. The results of this research are considered to provide important data for the prediction of internal sound level at the time of construction of exhibition facilities similar to this.