• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.437-439
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.15-22
• /
• 1996

In the soliton transmission system for a long-length and high bit rate data transmission systme using the nonlinear/dispersive optical fibers, the improtant problem is the loss characteristics and is the limited transmission rate by interaction forces. In this paper, It is explained the reasons of moved time position for the soliton peak value due to interaction force sof adjacent solitons. And for the analysis of interaction force affection level in the losslessmedia, we define the percent parameter of error rate due to the interaction forces and propose the optimum time distance of adjacent solitons by peak value tracking methods. With the results, initial percent of error is approximately 50% when itme difference between adjacent solitons is 5 times of funddametnal soliton pulse width. And it is confirmed that maximum transmission length of th esolitons is approximately 38 times of fundamental soliton period, which the maximum allowable percoent of error is 50%.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.408-413
• /
• 2017

In this paper, we newly developed a byte-inverted transmission method for flicker-free visible light communication (VLC). The VLC transmitter sends original data in the former half period of the clock, and inverted data and in the latter half period of the clock. The VLC receiver receives the original data in the in the former half period of the clock. In this system, we used 480Hz clock that was generated from the 60Hz power line. The average optical power of the LED array in the transmitter is constant, thus flicker-free, in the observation time longer than the period of the clock that is about 2ms. This period is shorter than the maximum flickering time period (MFTP) of 5ms that is generally considered to be safe. This configuration is very useful in constructing indoor wireless sensor networks using LED light because it is flicker-free and does not require additional transmission channel for clock transmission.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.140-150
• /
• 2012

In this paper, we investigate the optimal packet scheduling problem in a two-user multiple access communication system, where the transmitters are able to harvest energy from the nature. Under a deterministic system setting, we assume that the energy harvesting times and harvested energy amounts are known before the transmission starts. For the packet arrivals, we assume that packets have already arrived and are ready to be transmitted at the transmitter before the transmission starts. Our goal is to minimize the time by which all packets from both users are delivered to the destination through controlling the transmission powers and transmission rates of both users. We first develop a generalized iterative backward waterfilling algorithm to characterize the maximum departure region of the transmitters for any given deadline T. Then, based on the sequence of maximum departure regions at energy arrival instants, we decompose the transmission completion time minimization problem into convex optimization problems and solve the overall problem efficiently.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.54-62
• /
• 1996

To get the time response characteristics of the hydrostatic transmission, seaborne winch is modelde by using bond graphs. After modeling of its basic elements, it is represented as power flow, and the determination of variable causality. The state equations are derived by using CAMP. As dynamic stabilites and solutions are investigated by perturbation method and direct integration, winch system is stable. Simulations are performed under the conditions of low speed, high speed, and maximum tension. The pressure and flow rate of the hydrostatic transmission have a big overshoot. But when it is comparaed to the empirical data with simulation results, it is similar to each other. When a lead compensator is applied to improve response characteristics of the hydrostatic transmission, rise time and overshoot of the system are improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1493-1499
• /
• 2007

Real-time applications in a wireless sensor network environment require real-time transmissions from sensing nodes to sink nodes. Existing congestion control mechanisms have treated congestion problems in sensor networks, but they only adjust the reporting frequency or the sending rate in intermediate nodes. They were not suitable for real-time applications from the transmission delays point of view. In this paper, we suggest a new mechanism that can reduce the transmission delay and can increase the throughput for real-time applications in sensor network. This mechanism classifies data on the real-time characteristics, processes the data maintaining the real-time characteristics prior to the other data such as the non real-time data or the data lost the real-time characteristics. A modified frame format is also proposed in order to apply the mechanism to IEEE 802.15.4 MAC layer. The simulation based on ns-2 is accomplished in order to verify the performance of the suggested scheme from transmission delay and throughput standpoints. The simulation results show that the proposed algorithm has a better performance specifically when It applies to the real-time applications in sensor networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2259-2264
• /
• 2013

In this paper, a selective multiple-input multiple-output(MIMO) transmission scheme is proposed in dual-hop MIMO relaying systems, in which orthogonal space-time block code(OSTBC) transmission and transmit antenna selection(TxAS) transmission are selectively used. Assuming independent Rayleigh fading channels, the outage probability is analyzed for a decode-and-forward(DF) relaying system using the selective MIMO transmission scheme. Also, through numerical investigation, the outage performance for the DF relaying system using the selective MIMO transmission scheme is compared with that for the conventional DF relaying system using OSTBC or TxAS. Moreover, from the performance comparison, it is shown that the proposed scheme can reduce the system overhead without outage performance degradation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1229-1234
• /
• 2012

In this paper, we analyze the problems that the DDS middleware, which is a standard data-centric communication interface, uses the fixed packet transmission method by the pre-defined protocol for exchanging data packets. The packet transmission method selected in a fixed manner cannot handle appropriately the increasing of resource overhead in an environment where the load of the DDS network changes dynamically. If the load on the node and network exceeds the threshold, the performance of the packet transmission may be degraded rapidly. This results in a failure of ensuring the real-time characteristic of DDS middleware. To solve this problem, we propose the scheme of the adaptive packet transmission for adjusting the transmission method in real-time based on the overhead on the DDS network.

• Journal of Korea Multimedia Society
• /
• v.21 no.3
• /
• pp.415-422
• /
• 2018

Advances of telecommunication technology bring various changes in journalism field. Reporters started to gather, edit, and transmit content to main server in media company using hand-held smart media and notebook computer. This paper tried to testify valid bit-rate of visual news content using LTE network and mobile phone. Field news like natural disasters need real-time transmission of video content. But broadcasting company normally use heavy ENG system and transmission satellite trucks. We prepared and experimented different types of visual content that has different bit-rates. Transmission tool was LU-60HD mobile system of LiveU Corporation. Transmission result shows that bit-rate of 2Mbps news content is not suitable for broadcasting and VBR (Variable Bit Rate) transmission has better definition quality than CBR (Constant Bit Rate) method. Three different bit-rate of VBR transmission result shows that 5Mbps clip has better quality than 1Mbps and 3Mbps. The higher bit-rate, the better video quality. But if the content has much movements, that cause delay and abnormal quality of video. So optimizing the balance between stability of signal and quality of bit-rate is crucial factor of real-time broadcasting news gathering business.