• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1881-1886
• /
• 2016

In this paper, by using D2D communications that perform direct communications among devices within small transmission range of each device without base station, we assume that a device generates and transmits data packets to other proximate devices and the devices which receive the data packets relay those to other adjacent devices. To maximize the total number of devices which successfully receive data packets, Epidemic routing protocol is considered in this paper. In Epidemic routing protocol, all devices which received data packets try to relay the packets to other adjacent devices. We assume various network environment where devices are densely distributed in specific area(crowded area). In this environment, D2D SD can be a source node and D2D devices can be relay nodes. By setting transmission range of D2D SD and D2D devices as parameters, we analyze performance results of coverage probability of Epidemic routing protocol through intensive simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1032-1035
• /
• 1996

While Ethernet and TCP/IP are the most widely used protocol, for Real-time system, it is not applicable because it doesn't guarantee the deterministic transmission time. Furthermore, the TCP acknowledgement scheme and sliding window algorithm enforce to collide packets. Although various Collision-Free CSMA protocol was presented, it is very difficult to implement in well known OS(UNIX, WilidowsNT) because we have to modify network kernel. This paper presents another transmission protocol based on modified UDP. The colliding probability can be minimized by avoiding successive packet transmission and decreasing competition duration. The proposed algorithm can be used for the soft real-time industrial automation network.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.12-19
• /
• 2006

In this paper, we propose the bandwidth borrowing scheme which improves the performance of the cal admission control of the integrated GEO satellite networks. In general, target transmission rates of communications and streaming services are fixed, but data services do not have the target transmission rates. Therefore, we can control the transmission rates for data services flexibly according to the system loading situation. When the available bandwidth of the system is insufficient, the bandwidth borrowing scheme gives the bandwidth to request real time services by the transmission rates control of data services through packet scheduler. We make the queueing model for our system model and demonstrate the results through simulations. The simulation results show that there is a 8.7-35.2 dB gain at the total blocking probability according to the use of bandwidth borrowing scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.835-839
• /
• 2013

In this paper, We operate at a relatively low BER or using forward error control coding techniques on ways to increase the capacity of optical communication systems research. Coding gain is defined as the ratio of the probability of the coded signal and coding of error signal. Coding gain is increased, partly because of the period, to reduce the value of the optimal coding of the signal error probability decreases because of the effective bit binary symbol duration is longer than can be ignored. Transmission capacity on the coding gain for various code rates, which show the extent of up to 75Gb/s transmission capacity to get through it was confirmed that these coding techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.931-937
• /
• 2015

Distributed relay scheme for wireless ad hoc multi-hop multicast network composed of low-power and low-complexity wireless devices with high density is proposed. The proposed relay scheme is shown to be better than flooding, which is the distributed relay scheme applied to ZigBee, in the outage probability and the multicast transmission rate by simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.232-238
• /
• 2006

We propose a novel call admission control scheme which improves the handoff drop and the new call block probabilities of high priority services, minimizing the negative impact on low priority services, in multimedia service cellular networks. This paper proposes three schemes to solve this problem; the packing scheme in which available channels of a cell distributed to each frequency channel are concentrated on one frequency channel and a high transmission rate service is assigned to the frequency channel; the queuing scheme in which the queue is used for high transmission rate calls; and the power reallocation scheme in which the power assigned to calls under service is temporarily reduced and a high transmission rate service is allowed. The simulation results revealed that our scheme improved the drop and the block probabilities of the high priority services compared with the conventional scheme.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.299-307
• /
• 2011

The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF. The DCF controls the transmission based on CSMA/CA The BEB backoff algorithm of DCF shows relatively excellent performance in situation that the number of competing station is less, but has a problem that performance of throughput and delay is degraded in situation that the number of competing station is increased. This paper mathematically analyzes an MIMD backoff algorithm considering retry limit that increases the CW to doubled after collision and decreases smoothly the CW to halves after successful transmission in order to reduce the collision probability. To prove efficiency of the MIMD backoff algorithm, lots of simulations are conducted and analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.388-394
• /
• 2008

In this paper, MAC(Medium Access Control) algorithm for the IEEE 802.11 DCF(Distributed Coordination Function) improving the performance is proposed and analyzed by simulation. The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF(Point Coordination function). The DCF controls the transmission based on CSMA/CA(Carrier Sense Multiple Access With Collision Avoidance). The DCF shows excellent performance relatively in situation that competition station is less but has a problem that performance is fallen from throughput and delay viewpoint in situation that competition station is increased. This paper proposes an enhanced DCF algorithm that increases the CW to maximal CW after collision and decreases the CW smoothly after successful transmission in order to reduce the collision probability by utilizing the current status information of WLAN. To prove efficiency of proposed algorithm, a lots of simulations are conducted and analyzed.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.3
• /
• pp.117-124
• /
• 2013

In this paper we propose a TFRC(TCP Friendly Rate Control) which guarantees a minimum rate in order to improve the efficiency of the previous TFRC which cannot distinguish congestion losses and wireless losses and decreases throughput both in wired and wireless networks. This TFRC technique is able to guarantee a minimum rate for video by restricting a loss event rate with packet loss probability about existing TFRC and constraining a rate reduction from the feedback timeout. When we experimented both the existing TFRC and the new one with TCP in the same network, we found that the latter is better than the former. Consequently, it shows that the proposed TFRC can improve video streaming quality using a guaranteed minimum transmission rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.816-819
• /
• 1996

This paper focuses on development of simulation model for SAE J1850 and performance evaluation of a J1850 network. The simulation model has been developed by using discrete event simulation language. SAE J1850 is one of Class B network protocol for general data sharing applications. Through numerous simulation experiments, several important performance factors such as the probability of a successful transmission, average queue delay, and throughput have been evaluated.