• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2018년도 하계학술대회
• /
• pp.116-119
• /
• 2018

In this paper, we propose a new single-image dehazing method. The proposed method constructs color ellipsoids that are statistically fitted to haze pixel clusters in RGB space and then calculates the transmission values through color ellipsoid geometry. The transmission values generated by the proposed method maximize the contrast of dehazed pixels, while preventing over-saturated pixels. The values are also statistically robust because they are calculated from the averages of the haze pixel values. Furthermore, rather than apply a highly complex refinement process to reduce halo or unnatural artifacts, we embed a fuzzy segmentation process into the construction of the color ellipsoid so that the proposed method simultaneously executes the transmission calculation and the refinement process. The results of an experimental performance evaluation verify that compared to prevailing dehazing methods the proposed method performs effectively across a wide range of haze and noise levels without causing any visible artifacts. Moreover, the relatively low complexity of the proposed method will facilitate its real-time applications.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.143-151
• /
• 2007

Accurate measurements of the microwave surface resistance (Rs) of high temperature superconductor (HTS) films are important with regard to applications of HTS materials for wireless communications. As the surface resistance values of HTS films are usually extracted from the measured unloaded quality factor ($Q_0$) of resonators made of HTS films, it is essential to measure the resonator $Q_0$ with accuracy. The $TE_{011}\;mode\;Q_0$ of sapphire resonators with the endplates made of $YBa_2Cu_3O_{7-{\delta}}$(YBCO) film on $LaAlO_3$ is measured by using the S-parameter circle-fit method at a frequency of about 19.6 GHz and temperatures of 30 K to 90 K, which is compared with the measured values by using the Lorentzian-fit method. Good agreements are found between the two sets of $Q_0$ values measured by using the two different methods whether the resonator is used in a weak-coupling scheme or a strong-coupling scheme, showing reliability of both methods fur measuring the resonator $Q_0$ accurately. The $Q_0$ of sapphire resonators with a gap between the top plate and the rest of the resonator is also discussed.

• ETRI Journal
• /
• 제31권3호
• /
• pp.348-350
• /
• 2009

To fit the limited volume and power consumption of the passive radio frequency transmission system of the electronic time fuze, an improved coded mark inversion (CMI) is proposed in this letter. From the performance analysis, the energy transmission efficiency of this encoding method is at least 50% higher than that of CMI and NRZ. Finally, the experiment results show that by adopting this improved CMI, the change of DC voltage through magnetic coupling is lower than 0.2 V when the accuracy of data transmission is above 99.5%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1103-1105
• /
• 1998

It is becoming more and more difficult to construct new transmission lines because of many social problems. According to the load increase, Some of existing transmission lines will be heavy loaded over the limit. To solve this situation, one of method is peformed by replacing existing ACSR transmission lines with STACIR for increasing power transmission capacity in the 345kv transmission system. This paper presents several techniques for design and construction of transmission line replacement based on the actual experience in the 345kv Shinseongnam-Shinsiheung and Shinseongnam-Shinyeongseo transmission lines.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.50-56
• /
• 2017

Wireless sensor nodes have limited energy, so it is important to optimize energy consumption to preserve network lifetime. Various protocols have been proposed for this purpose. LEACH protocol and SEP are the representative protocols. These protocols become less effective as the Sensor Field becomes wider. To improve this, MR-SEP and L-SEP were proposed. These protocols increase the energy efficiency by dividing the Sensor Field into layers and reducing the transmission distance. However, when dividing a layer, there are cases where it is divided inefficiently, and a node within a certain range from a Base Station has a better transmission efficiency than a direct transmission method using a cluster method. In this paper, we propose a Single-hop layer for L-SEP to improve inefficient layer division and near node transmission efficiency. When the larger the Sensor Field, the better the performance of the proposed method by up to 87%. The larger the sensor field, the more efficient the proposed method is over the conventional method. That is, the proposed method is suitable for the wide Sensor Field.

• 한국전자파학회논문지
• /
• 제16권11호
• /
• pp.1099-1105
• /
• 2005

TRL 오차 수정 방법은 PCB 위에 제작된 고주파 소자를 측정할 때 많이 사용되는 방법이지만 오차 수정을 위해 제작된 표준 전송선 패턴의 특성 임피던스를 알아야만 보다 정확하게 측정 오차를 수정할 수 있다. 기존의 방법에서는 저항을 종단 처리한 표준 패턴을 추가로 이용하여 전송선의 단위 길이당 커패시턴스를 계산하고 주파수에 대해 fitting하는 방법으로 표준 전송선의 특성 임피던스를 계산하고 있으나 제작상의 부정확성에 의해 추출된 특성 임피던스가 영향을 받고 있음을 확인하였다. 본 논문에서는 측정된 S-parameter를 이용하여 제작상의 부정확성을 줄일 수 있고 기존 방법보다 정확한 특성 임피던스를 추출할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.814-817
• /
• 2013

본 논문에서는 사용자 제어가 가능한 안개제거 방법을 이용하여 안개상황에서 안개를 제거하여 가시성을 향상 시키는 방법을 제안한다. 제안하는 방법은 영상 내의 안개 정도를 나타내는 전달률(transmission rate)의 하한치를 계산하고, 사용자의 제어에 의해 전달률 하한치를 거듭제곱 처리하여 각 화소별로 전달률을 계산한다. 그리고 계산된 전달률을 이용하여 안개가 제거된 영상을 구한다. 제안 방법은 폐쇄공식(closed form)에 의하여 기존 방법의 문제점인 후광효과(halo effect)가 발생하지 않고 필터링에 의한 연산저하가 없어 실시간 처리가 가능하며, 사용자 제어를 통하여 안개가 낀 정도에 따른 안개제거 강도 조절이 가능하여 다양한 안개 상황에서도 개선된 안개제거 영상을 얻을 수 있다.

• Ocean Systems Engineering
• /
• 제11권4호
• /
• pp.331-351
• /
• 2021

Underwater images are very much different from images taken on land, due to the presence of a higher disturbance ratio caused by the presence of water medium between the camera and the target object. These distortions and noises result in unclear details and reduced quality of the output image. An underwater image restoration method is proposed in this paper, which uses blurriness information, background light neutralization information, and red-light intensity to estimate depth. The transmission map is then estimated using the derived depth map, by considering separate attenuation coefficients for direct and backscattered signals. The estimated transmission map and estimated background light are then used to recover the scene radiance. Qualitative and quantitative analysis have been used to compare the performance of the proposed method against other state-of-the-art restoration methods. It has been shown that the proposed method can yield good quality restored underwater images. The proposed method has also been evaluated using different qualitative metrics, and results have shown that method is highly capable of restoring underwater images with different conditions. The results are significant and show the applicability of the proposed method for underwater image restoration work.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.843-850
• /
• 2002

This paper presents a simulation method using the transmission line modeling to reduce simulation runtime of hydraulic control systems. This method is based on separating the system components each other using the transmission line elements prior to simulation, which leads to divide the simulated system into several subsystems suitable for an even more efficient integration. It can also handle nonlinearities and discontinuities without flag signal when restarting integration. By applying variable integration timestep to parallel hydraulic circuits via parallel processing, it is shown that simulation run-time can be reduced significantly compared with that of Runge Kutta method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2570-2575
• /
• 2003

Monitoring a power transmission line is significant for power electric companies. In this paper, we propose a new method for detecting an fault point of power transmission line by use of M-sequence correlation technique. In this method, detecting signal is used as one or plural M-sequences ( same characteristic polynomial, including normal and reverse mark, synchronized ). In receiving point, we make same sequence with the input one and take crosscorrelation function between M-sequence and the received signal. We can see transfer fanctions of plural paths between inputs and a output taps separated from different of delay times on the crosscorrelation function, and from these transfer fanctions, so we compare them when fault occurred with in usual.