• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1112-1115
• /
• 1990

Described is a new control signal transmission system which utilizes an optical fiber to transmit 2-bit control signals from the transmitter to receiver. In the transmitter the DC series control voltages are converted into the multiple frequency signals by voltage controlled oscillator (VCO). The multiple frequency signals can easily be transmitted by optical fiber. In the receiver the multiple frequency signals can be detected by analog or digital circuits and then be converted into 2-state control signals which can be used for a variety of applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.66-68
• /
• 2001

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission and distribution line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. In this paper, distribution polymer suspension insulator has been designed and investigated electric field distribution by FEM.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.993-996
• /
• 2007

Depending on applications where transmission bandwidth, wire distance, power consumption and EMI environments vary, design trade-offs must be made to optimize the display interface. After introducing the digital display interface architecture, topics such as cost, EMI, signal integrity, scalability and content protection are discussed with available techniques. Implementation issues are discussed regarding their cost and design complexity. Existing standards are reviewed and comparison on their strengths and shortcomings are discussed.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.116-122
• /
• 1997

The audible noise produced by corona discharge in high voltage transmission lines is the most important line design consideration. In this paper, more accurate and useful formulas for predicting the A-weighted audible noise during heavy and light rain in alternative current (AC) transmission lines are proposed through comparison with the existing formulas. The proposed formulas are developed by the applications of evolutionary computations (ECs) to audible noise data base from long-term measurement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.127-128
• /
• 2007

A dual band LNA is designed to set input matching and noise matching with source transmission feedback for wireless LAN applications. Some design techniques for the transmission line feedback of the dual band LNA have been developed with input and output design equations. The measured results shows close agreement with the simulated performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.509-515
• /
• 2002

Recently, the microprocessor with network function based control system instead of conventional microprocessor is widely used for industrial applications, and also these technologies are widely adopted for train control and monitoring in modem rapid transit system. The purpose of this paper is to propose a criteria for data transmission, which was designed and realized through Korea High Speed Train. Noise, distortion and attenuation are always present in data transmission system and strictly limit performance. This paper describes a method to calculate the propagation constant, attenuation constant, phase velocity and length of stub.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.685-687
• /
• 2024

Fiber optic cables are used extensively for remote monitoring in applications under extreme conditions, such as at high temperatures or in ionizing radiation fields. When high temperature fiber optic cables were subjected to gamma irradiations, there was a significant loss in transmission at wavelengths < 350 nm after only 1 minute of irradiation. Negligible recovery of the fiber optic transmission with time was observed over 2 years, but the irradiation damage was almost completely reversed by high temperature annealing at 400 ℃.

• 대한전자공학회논문지SD
• /
• 제46권10호
• /
• pp.70-78
• /
• 2009

본 논문에서는 고속 저전압 차동 신호(Low-Voltage Differential Signaling, LVDS) 전송방식의 응용을 위한 전송선 분석 및 설계 최적화 방법을 제안한다. 차동 전송 경로 및 저전압 스윙 방법의 발전으로 인해 저전압 차동 신호 전송방식은 데이터 통신 분야, 고 해상도 디스플레이 분야, 평판 디스플레이 분야에서 매우 적은 소비전력, 개선된 잡음 특성 및 고속 데이터 전송률을 제공한다. 본 논문은 차동 유연성 인쇄 회로 보드(flexible printed circuit board, FPCB) 전송선에서 선 폭, 선 두께 및 선간격과 같은 전송선 설계 변수들의 최적화 기법을 이용하여 직렬 접속된 전송선에서 발생하는 임피던스 부정합과 신호 왜곡을 감소시키기 위해 개선 모델과 개발된 수식을 제안한다. 이러한 차동 FPCB 전송선의 고주파 특성을 평가하기 위해 주파수 영역에서 전파(full-wave) 전자기 시뮬레이션 및 시간 영역 시뮬레이션을 각각 수행하였다. 본 논문에서 제안하는 방법은 저전압 차동 신호 방식의 응용을 위한 고속 차동 FPCB 전송선을 최적화하는데 매우 도움이 되리라 믿는다.

• 한국통신학회논문지
• /
• 제26권11C호
• /
• pp.51-63
• /
• 2001

분산 환경에서 멀티미디어 서비스가 활성화됨에 따라 다양한 멀티미디어 통신 기술 개발의 필요성이 제기되고 있다. 분산 환경에서 멀티미디어 스트림의 효율적인 전송과 멀티캐스팅 및 멀티미디어 응용의 상호운용성 등을 지원하기 위하여 개방형 멀티미디어 전용 통신 시스템의 개발과 멀티미디어 스트림의 제어 및 관리 방안의 제공이 요구되고 있다. 분산 환경에서 멀티미디어 스트림의 실시간 전송을 지원하기 위하여 RTP, RSVP, RTSP 등의 프로토콜들이 표준화된 바 있고, 멀티미디어 응용의 상호운용성과 스트림의 제어 및 관리 기능을 지원하기 위한 분산 처리를 위한 플랫폼으로서 OMG의 CORBA, DAVIC의 DSM-CC 등이 밭표된 바 있다. 본 논문에서는 멀티미디어 스트림의 실시간 전송, 제어 및 관리와 멀티미디어 응용의 상호운용성을 지원할 수 있는 CORBA 기반의 분산 멀티미디어 통신 시스템을 소개하고, 본 시스템과 VoD 시스템의 연동을 통한 QoS 측정 결과를 제시한다.

• International Journal of Computer Science & Network Security
• /
• 제21권4호
• /
• pp.255-263
• /
• 2021

Smart grid is a fully-automated, bi-directional, power transmission network based on the physical grid system, which combines sensor measurement, computer, information communication, and automatic control technology. Blockchain technology, with its security features, can be integrated with Smart Grids to provide secure and efficient power management and transmission. This paper dicusses the deployment of Blockchain technology in Smart Grid. It presents application areas and protocols in which blockchain can be applied to in securing smart grid. One application of each area is explored in detail, such as efficient peer-to-peer transaction, lower platform costs, faster processes, greater flexibility in power generation to transmission, distribution and power consumption in different energy storage systems, current barriers obstructing the implementation of blockchain applications with some level of maturity in financial services but concepts only in energy and other sectors. Wide range of energy applications suggesting a suitable blockchain architecture in smart grid operations, a sample block structure and the potential blockchain technicalities employed in it. Also, added with efficient data aggregation schemes based on the blockchain technology to overcome the challenges related to privacy and security in the smart grid. Later on, consensus algorithms and protocols are discussed. Monitoring of the usage and statistics of energy distribution systems that can also be used to remotely control energy flow to a particular area. Further, the discussion on the blockchain-based frameworks that helps in the diagnosis and maintenance of smart grid equipment. We have also discussed several commercial implementations of blockchain in the smart grid. Finally, various challenges have been discussed for integrating these technologies. Overall, it can be said at the present point in time that blockchain technology certainly shows a lot of potentials from a customer perspective too and should be further developed by market participants. The approaches seen thus far may have a disruptive effect in the future and might require additional regulatory intervention in an already tightly regulated energy market. If blockchains are to deliver benefits for consumers (whether as consumers or prosumers of energy), a strong focus on consumer issues will be needed.