• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.760-765
• /
• 2013

An Interline Power Flow Controller (IPFC) is a converter based controller which compensates and balance the power flow among multi-lines within the same corridor of the multi-line subsystem. The Interline Power Flow Controller consists of a voltage source converter based Flexible AC Transmission System (FACTS) controller for series compensation. The reactive voltage injected by individual Voltage Source Converter (VSC) can be controlled to regulate active power flow in the respective line in which one VSC regulates the DC voltage, the other one controls the reactive power flows in the lines by injecting series active voltage. In this paper, a circuit model for IPFC is developed and simulation of interline power flow controller is done using the proposed circuit model. Simulation is done using MATLAB Simulink and PSPICE. The results obtained by MATLAB are compared with the results obtained by PSPICE and compared with theoretical values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.170-178
• /
• 2010

In this paper, we propose the modeling of the power/ground plane which includes complex dielectric permittivity and loss tangent for the power/ground coupled noise. In order to estimate the effects of the dielectric substrate for the coupled noise, we used full-wave simulators, HFSS(High Frequency Structure Simulation) and MWS(MicroWave Studio). The simulated results for the commercial substrates are compared with the measured values. TLM(Transmission Line Method) was used for the calculation of power plane impedance using Debye model which depicts the dielectric loss of PCB. Finally, impedance from proposed circuit model showed very good coincidence to the measured data.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.825-827
• /
• 2000

자성체를 포함하는 자기 시스템을 해석하는데 있어 비선형과 히스테리시스(Hysteresis)는 매우 중요한 역할을 한다. 특히 재질의 히스테리시스 특성을 유한요소법(FEM)을 이용하여 계산하기 위해서 많은 방법들이 소개되었다. 단순 반복법이나 Fixed Point Technique(FPT), M-iteration 법. 뉴튼 랍슨 (Newton-Raphson) 법 등이 그 예이다. 이 방법들 중에서 뉴튼 랍슨법은 빠른 수렴 특성으로 가장 많이 사용되고 있다. 하지만 뉴튼-랍슨법을 이용하여 히스테리시스 재질을 해석할 때는 매 반복 계산 때마다 계 계수행렬(System Stiffness matrix)이 변화하기 때문에 요소의 수가 매우 많을 경우 역행렬을 계산하기 위한 시간이 많이 소요되는 단점이 있다. 특히 히스테리시스 해석의 경우에는 주로 time-step법을 이용하여 계산하므로 가장 시간이 많이 소요되는 행렬 계산 시간을 단축함으로써 전체 계산 시간을 크게 줄일 수 있다. 최근 비선형 해석에서 TLM(Transmission Line Modeling)법이 도입되어 비선형 해석 시의 계산 시간을 크게 단축할 수 있게 되었다. 본 논문에서는 비선형 해석에 적용된 TLM법을 히스테리시스 해석에 적용하는 방법을 새로 제안한다. TLM법은 뉴튼-랍슨법과 달리 각 반복 계산 때마다 계수행렬식이 변화하지 않고 단지 구동항만 변하기 때문에 행렬의 LU를 한 번 저장해 두면 forward와 backward substitution만 시행하면 된다. 따라서 요소의 수가 증가할 경우 TLM법을 사용하면 뉴튼-랍슨법에 비해 매우 큰 계산 이득을 얻을 수 있다. 본 논문에서는 TLM법을 히스테리시스에 적용하는 방법을 기술하고 간단한 모델에 이 방법을 적용하여 뉴튼-랍슨법과의 비교를 통해 TLM법의 효용성을 보인다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.179-182
• /
• 1999

A new band pass filter (BPF) prepared by dielectric monoblock and its design techniques are presented. The modeling of the three-pole dielectric monoblock BPF has been carried out by CAD. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The transmission line characteristic impendances were computed using 2-D FEM. The BPF for PCS has been designed to have a 60 MHz pass-bandwidth with center frequency of 1960 MHz and an attenuation pole at below the passband using a commercial 3-D structure simulator.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1413-1419
• /
• 2008

As the improvements of service quality is becoming an important issue the, interior noise level of a train is an important factor of comfortable ride. To reduce the interior noise level, noise sources of the train need to be removed. However, in case with a structure of large scale and multiple noise sources, an estimation of influences of major noise sources, with indentification of its traveling paths needs to be performed. In current state, to improve the interior noise reduction, consideration of sound transmission loss of the train body prior to manufacturing is usually performed. In this study, the sound transmission loss of the train body of new model train of seoul metro's line no.2 under test opeation is measured and modeling of the train body is performed. And train interior noise is predicted using the measured values.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.404-405
• /
• 2011

In this paper, we present basic modeling of Juju power system using PSCAD/EMTDC. In detail, models of bipolar HVDC system, power transmission line, basic thermal power plant, load, and wind farm have been developed for Jeju power system. For evaluating basic dynamic behavior, we tested the system with a simple scenario and the test result showed acceptable response.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1796-1803
• /
• 2015

While considering the current scenario, in this world power demand goes on increases day by day. Frequent power outages occur in high voltage transmission line due to the deprived performance of polluted insulators; this affects overall operation of power system and may indirectly impinge on the growth of production sector. Many researchers are keenly taking efforts to provide highly reliable and stable power to neediest. In this paper, A.C pollution flashover performance of disc type glass insulator and composite long rod insulators investigation under various artificial pollutions by varying Equivalent Salt Density Deposition (ESDD) levels. Here, we use different types of pollution methods like binding method, dipping method and spraying methods with different types of pollutants concentration. Based on dimensional analysis, four different Mathematical models have been developed to predict the A.C pollution Flashover Voltage (FOV) of insulators. Both the experimental and mathematically modeled results are compared; it's observed that mathematical model 3 yields better results.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.380-382
• /
• 2001

This paper describes the protection of insulation joint box in combined transmission line which is connected with the 154kV underground power cables. An actual power cable system was selected to establish modeling and to analyze. Modeling was established in EMTP and ATPDraw. Simulation was carried out according to the buried method of cable and connection method of CCPU. Results presented in this paper will be applied to another power cable systems.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1217-1219
• /
• 1998

For the improvement of an adaptive SPAR(Single-Phase Auto-Reclosure) and novel protection schemes, it is important to simulate arc faults. But, it is difficult to reproduce the real arc behaviour, i.e. the extinction phenomenon exactly by computer simulations due to extremely random behavior of secondary arc. This paper proposes a new computer modeling techniques for the primary and the secondary arc separately, which can be implemented with EMTP MODELS routine, and the performance of the proposed model is simulated on a typical 154 [kV] korean transmission line system.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.