• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.165-173
• /
• 2014

This paper presents a fast and high-quality haze removal method by the modification of the conventional transmission estimation process. In the conventional haze removal method, the halo and blocking artifacts arises while estimating the transmission. In order to effectively reduce the artifacts, the proposed method employs the maximum filter after the calculation of the dark channel. Because of the reduction of the artifacts, the proposed method can simplify the transmission refinement process without sacrificing the quality of the results: this paper proposes to use the single-channel guided filter instead of the multi-channel guided filter. The experimental results demonstrate that the quality of the dehazed results by the proposed transmission correction process is improved and the haze removal speed is increased by up to 59.6%, when compared to the conventional ones.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.494-496
• /
• 2003

Transmission congestion is one of the key factors to local market power in competitive electricity markets. This paper presents an alternative methodology in estimating market power under transmission congestion. The proposed methodology was demonstrated with the Optimal Power Flow(OPF).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.77-84
• /
• 2005

The considerations for reminder life of transmission line is gradually higher. It is requisite for investigation of ACSR life to test tensile load of ACSR as a fundamental data. It is vary important to analysis correlations between results of tensile load testing and elapsed years. Estimation of ACSR life can be obtained by statistics processing using mechanical experimental results. It is a general method to use regression analysis as a statistics processing technique. In this paper, we did experiment on tensile strength of ACSR by using a new and due to flame for artificial fire, and gathering due to a flame. The limit of life estimation is decided by basic line using twenty percentage reduction of rate tensile strength. This basic line is like to results of Canada Ontario Hydro-research. There are $480[mm^2]$ ACSR which are experimented on this study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.164-172
• /
• 2007

Surface cracks in concrete are common defects that can cause significant deterioration and failure of concrete structures. Therefore, the early detection, assessment, and repair of the cracks in concrete are very important for the structural health. Among studies for crack depth assessment, self-calibrating surface wave transmission method seems to be a promising nondestructive technique, though it is still difficult in determination of the crack depth due to the variation of the experimentally obtained transmission functions. In this paper, the spectral energy transmission method is proposed for the crack depth estimation in concrete structures. To verify this method, an experimental study was carried out on a concrete slab with various surface-opening crack depths. Finally, effectiveness of the proposed method is validated by comparing the conventional time-of-flight and cutting frequency based methods. The results show an excellent potential as a practical and reliable in-situ nondestructive method for the crack depth estimation in concrete structures.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.553-560
• /
• 2003

Since Wavelet Transform decomposes a video frame into subbands with various frequencies and resolutions, the reconstructed video qualify at a receiver fluctuates according to the location of transmission errors within frames. This deteriorates the whole visual duality of the video. Specifically, for a wavelet based video which exploits the motion estimation prediction scheme, the transmission errors of a subband not only have a bad effect on other subbands within a same frame but also propagates to the subsequent frames. In this paper, we propose BDP(Block Based Dispersive Packetization) scheme, for a wavelet based video stream, which maintains constant video quality despite packet location that a transmission error occurs. To evaluate the performance of the proposed scheme, we use MRME(Multi-Resolution Motion Estimation) scheme to compress a video in Inter coding mode and Gilbert´s error model to generate the error patterns in wireless network environment. The simulation results show that BDP is more efficient than BP (Block based Packetization) or DP (Dispersive Packetization) in both PSNR and visual quality.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.60-67
• /
• 2011

Visible light communication system transmits data by controlling light emission of LED and receives data through photo detecter, which is considered as one of strong candidates of next generation wireless communication systems. The transmission capacity of visible light communication system depends on light intensity emitted from LED, sensitivity of PD, distance between transmitter and receiver, angle of incidence at the receiver. In particular, the receiver's vertical and horizontal movement changes distance between transmitter and receiver and angle of incidence, which may degrades transmission capacity of system. In this paper, we propose an estimation algorithm of receiver's position and angle based on tracking of received light intensity for indoor visible light communication systems. The performance evaluation of proposed algorithm confirms that the estimation algorithm of receiver's position and angle is quite important for visible light communication system to improve its transmission capacity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.14-21
• /
• 1995

General Mechanical Structures have various and complex vibration transmission paths. In order to identify the mechanism of vibration transmission. The correct estimation of exciation forces and the exact modeling of transmission paths are required. In this paper, vector synthesis technique is employed to identify the characteristics of vibration input and it's transmission to body structure for the mounting system of a compressor in a refrigerator. Vibration reduction efficiency of each transmission path is evaluated by comparing individual vector components obtained before and after the paths from experimental research. The degree of effect is used to estimate the contribution of vibration input components to total output. And this paper presents a new technique based on simulation studies using vector synthesis dragram, by which the effects of change of the magnitude and phase of transmission paths can be predicted.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.252-256
• /
• 2004

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.94-98
• /
• 2009

In this paper, we propose a new channel estimation scheme for amplify and forward cooperative diversity with relay selection. In order to select best relay, it is necessary to know channel state information (CSI) at the destination. Most of the previous works, however, assume that perfect CSI is available at the destination. In addition, when the number of relay is increased it is difficult to estimate CSI through all relays within coherence time of a channel because of the large amount of frame overhead for channel estimation. In a proposed channel estimation scheme, each terminal has distinct pilot signal which is orthogonal each other. By using orthogonal property of pilot signals, CSI is estimated over two pilot signal transmission phases so that frame overhead is reduced significantly. Due to the orthogonal property among pilot signals, estimation error does not depend on the number of relays. Simulation result shows that the proposed channel estimation scheme provides accurate CSI at the destination.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.331-346
• /
• 1996

Exploring the epidemiological trend of HIV/AIDS is required for making the national AIDS policy. In this study, the trend of HIV/AIDS incidence, rout of transmission and some characteristics of AIDS for the past 11 years in Korea using the reported cases from the national STD screening scheme were reviewed. Based on the results, the trend of main route of transmission according to the year was established by stage and the HIV/AIDS cases in this year was estimated and that to the year 2000 was projected by 'Epimodel' programme. The results were as follows : 1. Of the total infected persons, 76% were in their twenties and thirties, socioeconomically and sexually active age groups. While the transmission by sexual contact overseas was decreasing, the infection through domestic heterosexual and homosexual contact was increasing. 2. In the middle of the 1980's, the infected persons were mainly prostitutes infected through heterosexual contact with the HIV positive foreigner in this county(stage 1). And in the late of the 1980's the main source of infection was the sexual contact overseas and the domestic heterosexual contact(stage 2). Since the early of the 1990's, the infection through the heterosexual contact with non-regular sexual partner in this country has increased rapidly(stage 3), which was the evidence of the possibility of HIV epidemics. After that, it was expected that the infection through the homosexual contacts, the heterosexual contacts with commercial sex workers outside and the non-regular sexual contact inside of this country would increase continuously. In the result, the occurrence of neonatal infection by vertical transmission was expected(stage4). 3. The number of HIV/AIDS was estimated at 572 to 2,313 and the projected number of HIV/AIDS to the you 2000 was around 5,800 including 627 AIDS patients. For the further study on the estimation and projection of HIV/AIDS, it was suggested that the sampling survey on the HIV infection rate in the high risk groups and the sentinel hospital surveillance system should be conducted.