• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.301-312
• /
• 2015

Corrosion of zirconium fuel cladding is known to limit the lifetime and reloading cycles of fuel in nuclear reactors. Oxide layers formed on ZIRLO4^{TM}$ cladding samples, after immersion for 300-hour and 50-day in a simulated primary water chemistry condition ($360^{\circ}C$ and 20 MPa), were analyzed by using the scanning transmission electron microscopy (STEM), in-situ transmission electron microscopy (in-situ TEM) with the focused ion beam (FIB) technique, and X-ray diffraction (XRD). Both samples (immersion for 300 hours and 50 days) revealed the presence of the ZrO sub-oxide phase at the metal/oxide interface and columnar grains developed perpendicularly to the metal/oxide interface. Voids and micro-cracks were also detected near the water/oxide interface, while relatively large lateral cracks were found just above the less advanced metal/oxide interface. Equiaxed grains were mainly observed near the water/oxide interface.

• Proceedings of the Petrological Society of Korea Conference
• /
• 2009.05a
• /
• pp.9-9
• /
• 2009

• Applied Microscopy
• /
• v.48 no.2
• /
• pp.49-53
• /
• 2018

A successful transmission electron microscope (TEM) analysis is closely related to the preparation of the TEM specimen and should be followed by the suitable TEM specimen preparation depending on the purpose of analysis and the subject materials. In the case of the Si-based anode material, lithium atoms of formed Li silicide were removed due to ion beam and electron beam during TEM specimen preparation and TEM observation. To overcome the problem, we proposed a new technique to make a TEM specimen without the ion beam damage. In this study, two types of test specimens from the Si-based anode material of Li-ion battery were prepared by respectively adopting the only focused ion beam (FIB) method and the new FIB-ultramicrotome method. TEM analyses of two samples were conducted to compare the Ga ion damage of the test specimen.

• Applied Microscopy
• /
• v.46 no.4
• /
• pp.188-192
• /
• 2016

Proper sample preparation prior to microscopy is necessary for maintaining the components of tissues in a state as close to a living state as possible. For optimal preservation of biological samples, the sampling conditions are as important as the fixation itself. Various factors influence the selection and fixation efficiencies of a fixative, including sample size, osmolarity, pH, penetration rate and depth, fixative temperature, fixation time, fixative concentration, fixative amount, and retention time. Therefore, several factors for selecting and administering fixation procedures are evaluated pertaining to optimal sample preparation for transmission electron microscopy.

• Applied Microscopy
• /
• v.51
• /
• pp.8.1-8.7
• /
• 2021

Growing demands for comprehending complicated nano-scale phenomena in atomic resolution has attracted in-situ transmission electron microscopy (TEM) techniques for understanding their dynamics. However, simple to safe TEM sample preparation for in-situ observation has been limited. Here, we suggested the optical microscopy based micro-manipulating system for transferring TEM samples. By adopting our manipulator system, several types of samples from nano-wires to plate-like thin samples were transferred on micro-electro mechanical systems (MEMS) chip in a single step. Furthermore, the control of electrostatic force between the sample and the probe tip is found to be a key role in transferring process.

• 한국전자현미경학회:학술대회논문집
• /
• 2005.11a
• /
• pp.144-146
• /
• 2005

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.256-260
• /
• 2002

Carbon nanotubes on metal(SUS304) substrates were synthesized by using micro-wave plasma-enhanced chemical vapor deposition at $650^{\circ}C$ with gas mixture CH$_4$(11%) and H$_2$(89%). Their structure was investigated by scanning electron microscopy and transmission electron microscopy. Raman spectroscopy was also used to justify the structure and crystallinity of graphite sheets. High-resolution transmission electron microscopy images clearly showed carbon nanotubes to be multwalled. The measured turn-on field and current density obtained from I-V measurement were 4.4 V/$\mu \textrm{m}$ and $8.4\times10^1\mu\textrm{A}/\textrm{cm}^2$, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.472-473
• /
• 2006

Maghemite and hematite nanospheres were synthesized by using the Sol-gel technique. The structural properties of these nanosphere powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and pore size distribution. Hematite phase shows crystalline structures. The mean particle size that resulted from BET and XRD analyses were 4.9 nm and 2 nm. It can be seen from transmission electron microscopy that the size of the particles are very small which is in good agreement with the FESEM and the X-ray diffraction. The BET and pore size method were employed for specific surface area determination.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.553-557
• /
• 2011

Poly(vinyl alcohol) (PVA)/waterborne polyurethane (WBPU)/montmorillonite clay (MMT) nanocomposite nanofibers were prepared using electrospinning technique of aqueous solutions. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction and thermal gravimetric analyzer were used to characterize the morphology and properties of the nanocomposite nanofibers. Since PVA, WBPU and MMT are hydrophilic, non-toxic and biocompatible materials, these nanocomposite nanofibers can be used for filter and medical industries as wound dressing materials, antimicrobial filters, etc.

• Applied Microscopy
• /
• v.48 no.4
• /
• pp.126-127
• /
• 2018

Carbon has numerous allotropes and various crystalline forms with full dimensionalities such as diamond, graphite, fullerenes, and carbon nanotubes leading a wide range of applications. Since the emerge of graphene consisting of a single atomic layer of carbon atoms, a fabrication of all-carbon-based device with combination of one-, two-, and three-dimensional carbons has become a hot issue. Here, we introduce an ultimate one-dimensional carbon atomic chain. Carbon atomic chains were experimentally created by removing atoms from monolayer graphene sheet under electron beam inside transmission electron microscope (TEM). A series of TEM images demonstrate the dynamics of carbon atomic chains over time from the formation, transformation, and then breakage.