• 한국통신학회논문지
• /
• 제38B권7호
• /
• pp.535-542
• /
• 2013

Coordinated multi-point transmission (CoMP) is considered to be a promising technique to improve the throughput for LTE-Advanced systems. One important approach for CoMP is Joint Transmission (JT). However, the analytical model of JT has not been fully studied, as user equipments (UEs) receiving the desired signals from an adjacent base station (BS) as well as serving BS, or only serving BS were not distinguished. We derive a new analytical model to describe the call admission control in JT based systems. The performance measures of interest are the call blocking probability, and resource utilization. Furthermore, we compare the performance of JT-based systems and non-JT- based systems. The analytical results are in reasonable agreement with the simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.157-160
• /
• 2002

When the teleoperation system has a signal transmission time delay between slave system and control system, the position tracking performance of the slave system and system stability are likely to be deteriorated. This paper proposes a force reflecting position control scheme for teleoperation system with signal transmission time delay. The proposed scheme not only satisfy the system internal stability but also improves the position tracking performance with disturbance rejection capability. The simulation results show that the proposed control method provides excellent performances.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권11호
• /
• pp.1081-1085
• /
• 2010

무선 센서 네트워크에서는 전송파워 제어를 이용하여 전력소비를 줄이고 채널간의 간섭을 줄일 수 있다. 무선 링크의 품질은 시간 및 공간적인 상황에 따라 변화하기 때문에 링크의 실패가 빈번하다. 기존의 전송파워 제어 기법은 링크 품질 변화에 적응할 수 있도록 주기적으로 이웃 노드와 비컨 패킷을 주고 받아 동적으로 전송파워를 조절하도록 하였다. 하지만 전송파워를 조절하는 주기에 따라서 링크 품질의 변화에 적용하는 시간과 트래픽 및 에너지 오버헤드에 영향을 줄 수 있다. 본 논문에서는 링크의 품질변화에 따른 동적인 전송파워 제어 기법과 전송파워 제어 주기를 변경하는 기법을 제안한다. 이를 통하여 링크가 불안정할 때에는 전송파워 제어 주기를 감소시켜 민첩하게 링크 품질을 유지하며, 링크가 안정할 때는 전송파워 제어 주기를 증가시켜 이에 따른 프로토콜의 오버헤드를 줄이고자 하였다.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.878-883
• /
• 2006

발전된 형태의 통신망 제공은 광대역 멀티미디어 서비스를 가능하게 하고 있다. 네트워크 기반 지능형 이동 로봇 서비스가 새로운 서비스 중의 하나이다. 이때 네트워크 로봇을 원격으로 제어하기 위해서는 실시간 신뢰성 있는 로봇제어 데이터 전송이 필요하다. 본 연구에서 UDP 프로토콜에 기반을 둔 로봇 제어 데이터의 효과적인 전송기법을 제안한다. 제안한 기법은 로봇 제어 데이터에 우선순위를 부여하고 기지국에서 로봇 제어 데이터를 중복으로 전송하는 것이다. NS-2 모의실험을 통하여 제안한 제어데이터 전송 프로토콜 방법은 전송지연시간이 적으며 패킷 손실율도 매우 적음을 보인다.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.856-867
• /
• 2006

This paper proposes a new algorithm for opportunistic scheduling that take advantage of both multiuser diversity and power control. Motivated by the multicast RTS and priority-based CTS mechanism of OSMA protocol, we propose an opportunistic packet scheduling with power control scheme based on IEEE 802.11 MAC protocol. The scheduling scheme chooses the best candidate receiver for transmission by considering the SINR at the nodes. This mechanism ensures that the transmission would be successful. The power control algorithm on the other hand, helps reduce interference between links and could maximize spatial reuse of the bandwidth. We then formulate a convex optimization problem for minimizing power consumption and maximizing net utility of the system. We showed that if a transmission power vector satisfying the maximum transmission power and SINR constraints of all nodes exist, then there exists an optimal solution that minimizes overall transmission power and maximizes utility of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.158-163
• /
• 2005

Competitive electricity markets necessitate equitable methods for allocating transmission usage in order to set transmission usage charges and congestion charges in an unbiased and an open-accessed basis. So in competitive markets it is usually necessary to trace the contribution of each participant to line usage, congestion charges and transmission losses, and then to calculate charges based on these contributions. A UPFC offers flexible power system control, and has the powerful advantage of providing, simultaneously and independently, real-time control of voltage, impedance and phase angle, which are the basic power system parameters on which sys-tem performance depends. Therefore, UPFC can be used efficiently and flexibly to optimize line utilization and increase system capability and to enhance transmission stability and dampen system oscillations. In this paper, a mathematical approach to allocate the contributions of system users and UPFCs to transmission system usage is presented. The paper uses a dc-based load flow modeling of UPFC-inserted transmission lines in which the injection model of the UPFC is used. The relationships presented in the paper showed modified distribution factors that modeled impact of utilizing UPFCs on line flows and system usage. The derived relationships show how bus voltage angles are attributed to each of changes in generation, injections of UPFC, and changes in admittance matrix caused by inserting UPFCs in lines. The relationships derived are applied to two test systems. The results illustrate how transmission usage would be affected when UPFC is utilized. The relationships derived can be adopted for the purpose of allocating usage and payments to users of transmission network and owners of UPFCs used in the network. The relationships can be modified or extended for other control devices.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.943-950
• /
• 2005

초고속 통신망을 통해 다양한 서비스 품질을 요구하는 멀티미디어 데이터의 서로 다른 실시간 전송 제약을 보장 할 수 있는 스트림 전송 기법에 대한 연구가 활발히 진행되고 있다. 각 멀티미디어 응용의 데이터 전송 요구에 따라 차별적으로 자원을 예약하는 기법을 설계하고 할당되지 않고 남아 있는 자원의 활용률을 높일 수 있는 대역폭 할당 기법과 유연한 실시간 전송을 제공할 수 있는 파이프 라이닝 기법을 제시하였다. 또한 멀티미디어 데이터의 고유 특성으로 인한 동기성을 보장하기 위해서 수신 버퍼를 기반으로 한 피드백 전송 제어 기법을 적용하여 실시간 전송이 가능하도록 하였다. 그리고 네트워크 폭주로 인한 전송 경로상의 병목현상이 발생하였을 때 최소한의 서비스 품질을 보장하면서 에러 허용률 범위안에서 데이터 전송량에 대해 네트워크 자원 요구량을 저하시킬 수 있는 전송 제어 기법을 제안하였다. 마지막으로 송, 수신자 간에 지연에 민감한 비디오 스트림이 연속적으로 전송 될 수 있도록 각 비디오 스트림이 요구하는 최대 대역폭을 평활화 할 수 있는 동적 대역폭 평활화 기법을 제안하였다.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.197-203
• /
• 2004

A real-time network in a distributed control system plays an important role for the reliable data transmission. Compared to the field-buses used in the past, TCP/IP protocol on the top of Ethered provides a compatibility between applications as well as an economical method to develop softwares. This paper proposes a modified TCP/IP structure for IEEE-1394 network, with which asynchronous and isochronous data transmission is selectively used for the real-time data transmission in a distributed control system. This paper also shows the performance of the proposed protocol by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.484-487
• /
• 1997

In this paper a simulation program for the powertrain control of a gasoline engine with automatic transmission is presented, The object-oriented programming approach has been pursued, and MATLAB/ SIMULINK was adopted for its environment. The purpose of the paper is to demonstrate the programmability of a control system in the object-oriented fashion so that the transferability of the objects is guaranteed. The program developed in the paper was applied to a gasoline engine and the mathematical models used in the paper were just adopted from the literature. It is shown that the simulation results and real experimental results coincide well. Therefore, it is expected that the program or objects made in the paper are useful for the automotive engineers when they design a new engine/transmission system or modify a part of existing system.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.68-84
• /
• 2000

A study to reduce the transient torque in shifting in automatic transmission has been very important issue. Recently it is really dominant to decrease the torque by using independent-acting hydraulic circuit because we can control the clutch pressure actively and elaborately. So we design the new hydraulic circuit to control the clutches in automatic transmission and make the module library of computer simulations, We apply the results to GM model automatic transmission and carry out 1longrightarrow4 shifting simulations. By this work we recognize the capability of active and elaborate clutch pressure control using new hydraulic circuit. In addition We develop the tool to simulate the powertrain system. It is easier to update and exchange the subsystem model or parameters than conventional simulation tools.