• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.153-158
• /
• 2003

This study concerns the characteristics of helical flow in a concentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and 0.2％ aqueous of sodium carboxymethyl cellulose(CMC), respectively, when the inner cylinder rotates at the speed of 0∼500rpm. The effect of rotation on the skin friction is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. The change of skin friction coefficient corresponding to the variation of rotating speed is large for the laminar flow regime, whereas it becomes smaller as Re increases for the transitional flow regime and, then, it gradually approach to zero for the turbulent flow regime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.956-961
• /
• 2003

Direct numerical simulations of flow over a circular cylinder are performed at two different Reynolds numbers (Re=220 and 300) that correspond to three-dimensional instabilities of mode A and mode B, respectively, to investigate the characteristics of drag and lift at these Reynolds numbers. The drag and lift coefficients are measured locally along the spanwise direction and their characteristics are studied in detail. The variation of total drag in time is large at Re=220, and the total drag becomes minimum when vortex dislocation occurs in the wake. The drag and lift variations in space are also closely associated with the evolution of vortex dislocation at this Reynolds number. At Re=300, vortex dislocation is not found in the wake and temporal variations of drag and lift are much smaller than those at Re=220, but their spatial variations are quite large due to the near-wake secondary vortices existing in the mode B instability.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.589-600
• /
• 2022

Investigations on the molten-pool sloshing behavior are of essential value for improving nuclear safety evaluation of Core Disruptive Accidents (CDA) that would be possibly encountered for Sodium-cooled Fast Reactors (SFR). This paper is aimed at synthesizing the knowledge from our recent studies on molten-pool sloshing behavior with solid particles conducted at the Sun Yat-sen University. To better visualize and clarify the mechanism and characteristics of sloshing induced by local Fuel-Coolant Interaction (FCI), experiments were performed with various parameters by injecting nitrogen gas into a 2-dimensional liquid pool with accumulated solid particles. It was confirmed that under different particle-bed conditions, three representative flow regimes (i.e. the bubble-impulsion dominant, transitional and bed-inertia dominant regimes) are identifiable. Aimed at predicting the regime transitions during sloshing process, a predictive empirical model along with a regime map was proposed on the basis of experiments using single-sized spherical solid particles, and then was extended for covering more complex particle conditions (e.g. non-spherical, mixed-sized and mixed-density spherical particle conditions). To obtain more comprehensive understandings and verify the applicability and reliability of the predictive model under more realistic conditions (e.g. large-scale 3-dimensional condition), further experimental and modeling studies are also being prepared under other more complicated actual conditions.

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.130-138
• /
• 2000

일방향흐름에 의한 해류의 마찰력 계산을 위하여 Prandtl의 혼합길이 이론을 수심 전구간에 적용하고 난류의 세기와 수리조건에 따라 완난류와 전난류로 분류하여 마찰계수를 산정하는 개수로 마찰계수 산정방법을 제시하였다. 파랑과 해류의 합성류에 의한 해저마찰력을 계산하기 위하여 두 유속의 연직분포를 고려한 BYO 모형을 이러한 흐름특성을 반영하여 개선하였다. BYO 모형은 모든 유속의 연직분포가 해저면으로부터의 직선과 접선으로 만나는 점(Bijker point)을 도출하여 파운동 유속과 해류유속의 합성을 이 점에서 시행하여 일주기의 평균갑을 구하는 모형이다. 일방향흐름의 해류나 천해파에 의한 파운동이나 해저면 가까이 경계층흐름은 완난류, 천이난류, 전난류 등 세가지 종류로 대별된다. 그 중 완난류로 대별하여 두 경우에 대한 합성류 마찰력 산정방법을 제시하였다.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.8-15
• /
• 2005

This study concerns the characteristics of helical flow in a concentric and eccentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and $0.2\%$ aqueous of sodium carboxymethyl cellulose(CMC), respectively, when the inner cylinder rotates at the speed of $0\~500$ rpm. The effect of rotation on the skin friction coefficient is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. This study shows the change of skin friction coefficient and wall shear stress corresponding to the variation of rotating speed of the inner cylinder, radius ratio, eccentricity, and working fluids.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.73-83
• /
• 2019

It is important to clarify the mechanisms of molten-fuel-pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors. In this study, motivated by acquiring some evidence for understanding the characteristics of this behavior at more realistic conditions, a number of experiments are newly performed by injecting nitrogen gas into a water pool with the accumulation of solid particles. To achieve comprehensive understanding, various parameters including particle bed height, particle size, density, shape, gas pressure along with the gas-injection duration, were employed. It is found that due to the different interaction mechanisms between solid particles and the gas bubble injected, three kinds of regimes, termed respectively as the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime, could be identified. The performed analyses also suggest that under present conditions, all our experimental parameters employed can have noticeable impact on the regime transition and resultant sloshing intensity (e.g. maximum elevation of water level at pool peripheries). Knowledge and fundamental data from this work will be used for the future verifications of fast reactor severe accident codes in China.

• 대한원격탐사학회지
• /
• 제39권5_1호
• /
• pp.563-576
• /
• 2023

본 연구에서는 대류권 오존과 전구체인 nitrogen oxides (NOx), volatile organic compounds (VOCs)의 광화학반응 관계를 살펴보고자, Ozone Monitoring Instrument (OMI)와 TROPOspheric Monitoring Instrument(TROPOMI)의 nitrogen dioxide (NO₂), formaldehyde (HCHO), OMI/Microwave Limb Sounder (MLS) tropospheric column ozone (TCO), Airkorea 지상측정 ozone (O₃) 자료를 분석하였다. OMI 위성자료를 이용하여 2006년부터 2020년까지 장기 변화 경향을 살펴보면 TCO는 동북아시아 지역 전체적으로 증가하는 추세를 보였으며, NO₂는 꾸준히 감소하고 HCHO는 계속해서 증가하는 경향성을 보였다. 또한 오존 민감도의 지표인 formaldehyde nitrogen dioxide ratio (FNR)은 점점 증가하고 있으며, 이는 VOC-limited 영역이 감소하고 있음을 의미한다. 본 연구는 한국 지역 오존의 지속적인 증가 원인을 밝히기 위해서 최근 4년 기간(2019~2022년)의 TROPOMI FNR과 지상 측정 O₃를 이용하여 국내 오존 생성 민감도 분석을 진행하였다. 기존 선행연구들과 동일하게 국내 대도시 지역에서 VOC-limited 및 Transitional 영역이 나타났으며, 그 외에도 국내 주요 발전소가 위치한 지역에서 VOC-limited 영역이 나타났다. VOC-limited 영역, 즉 NOx가 과도하게 포화되어 있는 영역에서는 NOx 배출 감소가 오히려 적정 반응을 약화시켜 국내 오존 농도 증가를 유도했을 것으로 판단된다. 따라서 VOC-limited 영역이 나타나는 지역에서 오존 농도를 감소시키기 위해서는 NOx의 배출보다 단기적으로 VOC 배출을 감소시켜야 함을 시사한다.

• 토지주택연구
• /
• 제4권2호
• /
• pp.133-144
• /
• 2013

It is commonplace to refer to the Nordic countries of Sweden, Norway, Denmark, Finland and Iceland as a distinctive and homogenous welfare regime. As far as social housing is concerned, however, the institutional heritage of the respective countries significantly frames the ways in which social housing is understood, regulated and subsidized, and, in turn, how housing regimes respond to the general challenges to the national welfare states. The paper presents a historical institutionalist approach to understanding the diversity of regime responses in the modern era characterized by increasing marketization, welfare criticism and internationalization. The aim is to provide outside readers a theoretically guided empirical insight into Scandinavian social housing policy. The paper first lines up the core of the inbuilt argument of historical institutionalism in housing policy. Secondly, it briefly introduces the distinctive ideal typical features of the five housing regimes, which reveals the first internal distinction between the universal policies of Sweden and Denmark selective policies of Iceland and Finland. The Norwegian case constitutes a transitional model from general to selective during the past quarter of a decade. The third section then concentrates on the differences between Denmark, Sweden and Norway in which social housing is, our was originally, embedded in a universal welfare policy targeting the general level of housing quality for the entire population. Differences stand out, however, between finance, ownership, regulation and governance. The historical institutional argument is, that these differences frame the way in which actors operating on the respective policy arenas can and do respond to challenges. Here, in this section we lose Norway, which de facto has come to operate in a residual manner, due to contemporary effects of the long historical heritage of home ownership. The fourth section then discusses the recent challenges of welfare criticism, internationalization and marketization to the universal models in Denmark and Sweden. Here, it is argued that the institutional differences between the Swedish model of municipal ownership and the Danish model of independent cooperative social housing associations provides different sources of resistance to the prospective dismantlement of social housing as we know it. The fifth section presents the recent Danish reform of the governance model of social housing policy in which the housing associations are conceived of as 'dialogue partners' in the local housing policy, expected to create solutions to, rather than produce problems in social housing areas. The reform testifies to the strategic ability of the Danish social housing associations to employ their historically grounded institutional relative independence of the public system.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.85-90
• /
• 2004

We have presented characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. The experimental apparatus consisted of a slot burner and a contraction nozzle for a lifted flame. As concentration difference of the both side of slot burner increases, the shape of flame changed from a premixed flame to a triple flame, and the liftoff height is decreased to the minimum value and then increase again. Around this minimum point, it is confirmed a transition regime from premixed flame to triple flame. Consequently, the experimental results of the liftoff height, flame curvature and luminescence intensity showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. To differentiate triple flame and premixed flame, ${\Phi}$ value of partially premixed fraction is employed. The partially premixed fraction ${\Phi}$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.

• 한국진공학회지
• /
• 제18권6호
• /
• pp.403-410
• /
• 2009

진공챔버는 진공게이지 교정, 산업에서의 재료처리 등 여러 가지 다양한 용도에 맞게 적용이 가능하다. 이 진공챔버 내부에서 가스가 유입되는 과정에서의 진공도는 일정하게 유지하기가 힘들다. 산업체 응용에서뿐만 아니라 연구과정에서도 진공챔버 내부에 가스가 유입되는 동안의 내부압력분포와 최대도달 평형압력을 아는 것이 매우 중요하다. 이러한 진공챔버 내부의 압력 불균형을 감소시키기 위해서 가스 주입구 부분에 baffle을 이용하는 방법이 있다. 현재 지속적인 기체흐름이 있는 진공챔버 내부의 기체흐름의 작용에 관해 0.1 Pa~133 Pa 영역에서 불규칙한 압력을 최소화하기 위한 baffle plate의 효과에 대해 연구하였다. 최대편차는 가스 주입구 부분에서 나타나는 압력으로 baffle plate가 전환흐름영역에서 큰 영향을 미치는 것으로 나타났다.