• International Journal of Contents
• /
• 제11권1호
• /
• pp.15-20
• /
• 2015

The purpose of this research is to study methods for performing transition that have visual representation of corresponding animations with no bounce in subsequently recognized user information when attempting to interact with a virtual 3D character in real-time using user motion. If the transitions of the animation are needed owing to a variety of external environments, continuous recognition of user information is required to correspond to the motion. The proposed method includes linear interpolation of the transition using cross-fades and blending techniques. The normalized playing time of the source animation was utilized for automatically calculating the transition interpolation length of the target animation and also as the criteria in selecting the crossfades and blending techniques. In particular, in the case of blending, the weighting value based on the degree of similarity between two animations is used as a blending parameter. Accordingly, transitions for visually excellent animation are performed on interactive holographic projection systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.136-141
• /
• 2000

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally studied in 760 mm long and 100 mm wide test sections with 2.0 and 3.0mm gaps. The resulting data have been compared to previous transition models. For the transition from bubbly to slug flow the superficial velocity of gas increased as the gap width increased. The comparison of experimental data to the transition model developed by Taitel and Barnea showed relatively good agreement for the bubbly-to-slug transition in the case of 2mm gap width. For the criteria of Mishima and Ishii to be applicable to the slug-to-churn transition the distribution parameter should be well defined for narrow channels. Even though the gap width of narrow channels increased the superficial gas velocity did not change for the transition form chum to annular flow regime. For the chum-to-annular transition the model of Taitel and Barnea showed discrepancies with experimental data, especially in the channel with larger gap.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.15-24
• /
• 2020

With the development of the chemical industry, the chemical accident is increasing every year, thereby increasing the risk of accidents caused by chemicals. The Ministry of Environment provides the criteria for determining shelter-in-place or outdoor evacuation by material, duration of accident, and distance from the toxic substance leak. However, it is hard to say that the criteria for determining the transition point are not clear. Transition point mean the time that evacuation method is switched from shelter-in-place to outdoor evacuation. So, the purpose of this study was to calculate appropriate transition point by comparing the cumulative toxic load. Namdong-gu in Incheon Metropolitan City was finally selected as the target area, considering the current status of the population of Incheon Metropolitan City in 2016 and the statistical survey of chemicals in 2016. The target materials were HCl, HF, and NH₃. Modeling was simulated by ALOHA and performed assuming that the entire amount would be leaked for 10 min. Residents' evacuation scenarios were assumed to be shelter-in-place, immediate outdoor evacuation, and outdoor evacuation at an appropriate time after shelter-in-place. Based on the above method, the appropriate transition point from residents located in A(800 m away), B(1,200 m away), C(1,400 m away) and D(2,200 m away) was identified. In HCl, appropriate transition point was after 15 min, after 16 min, after 17 min, after 20 min in order by A, B, C and D. In HF, appropriate transition point was before 1 min or after 16 min, before 4 min or after 19 min, before 5 min or after 20 min, before 14 min or after 26 min in order by A, B, C and D. In NH₃, appropriate transition point at A was before 4 min or after 16. Others are not in chemical cloud. This study confirmed the transition point to minimize the cumulative toxic load can be obtained by quantitative method. Through this, it might be possible to select evacuation method quantitatively that cumulative toxic load are minimal. In addition, if the shelter-in-place is maintained without transition to outdoor evacuation, the cumulative toxic load will increase more than outdoor evacuation. Therefore, it was confirmed that actions to reduce the concentration of chemicals in the room were necessary, such as conducting ventilation after the chemical cloud passed through the site.

• 한국환경복원기술학회지
• /
• 제15권2호
• /
• pp.31-40
• /
• 2012

The Environmental Conservation Value Assessment Map (ECVAM) is a five grade assessment map created with nationally integrated environmental information and environmental values. The map is made through the evaluation of 65 items, including greenbelt area and naturalness. Naturalness means original state of nature, and it is one of the most important evaluation items for conserving nature. The criteria of naturalness includes the Degree of Green Naturality (DGN) made by MOE. Using the data which has been not updated is a problem of accuracy for ECVAM. Therefore, this study would like to improve the criteria of naturalness. To improve the criteria, the study examined the effectiveness of DGN using field survey. The results of analysis the naturalness without DGN, some area changed grade of naturalness have been already damaged or cleared for agriculture and industrial purposes. The grade of naturalness should be included the concept of vegetation transition like DGN. The study suggested a improved method using vegetation type (natural and planted forest), forest age, and the grade of vegetation conservation. The method was reviewed by experts and field survey. After applying the method in South Korea, the grade of naturalness were distributed evenly like GradeI is 38.87%, GradeII is 37.62%, GradeIII is 23.51%, respectively. From the results of field survey, over 4 grade of forest age in natural forest showed similar pattern of structure and composition in original forests. Therefore, the improved criteria explained the naturalness better than existing criteria, and the accuracy of ECVAM has been improved more.

• 공업화학
• /
• 제31권3호
• /
• pp.334-337
• /
• 2020

한국인정기구(KOLAS)는 시험 및 교정기관이 KS Q ISO/IEC 17025 요구사항에 맞추어 적절하게 운영하고 유효한 결과를 생산할 수 있도록 표준안을 제시하고 있다. 국가표준기본법(시험·검사: 시험·검사기관 인정, 교정: 국가교정제도의 확립)을 근거로 운영하고 있다. 최근, 국제시험소인정기구(ILAC)가 자격기준을 강화함에 따라 공인시험·교정기관들도 요구사항(KS Q ISO/IEC 17025:2017)에 맞추어 2020년 11월까지 전환을 완료해야 한다. 국내에서 운영되고 있는 899개 KOLAS 인정시험·검사와 교정기관이 여기에 해당된다. 여기에서는 적격성에 대한 주요 일반 요구사항을 요약하였다.

• Tribology and Lubricants
• /
• 제21권1호
• /
• pp.16-20
• /
• 2005

Friction and wear characteristics between two steel surfaces under fretting condition are investigated experimentally. The fretting damage caused by low-amplitude oscillatory sliding can be classified into three regimes of gross-slip, mixed-slip and partial-slip due to stick-slip phenomenon. One of the most important characteristics of fretting wear is the transition from gross-slip to mixed-slip. This study was focused on getting the degree of stick-slip out of the friction transition under fretting condition. Fretting wear is divided into three conditions of gross-slip/mixed-slip/partial-slip. The criteria for the division are friction and displacement amplitude, wear scar morphology and dissipated energy. In this test, friction force and displacement were measured for detecting the transition from mixed-slip to gross-slip and qualitatively predicting the degree of the wear.

• 복식문화연구
• /
• 제27권4호
• /
• pp.323-335
• /
• 2019

Identifying the selection criteria of wedding planners, who are the main human resource that contribute to the overall satisfaction level of a wedding's preparation, can produce important data for the wedding industry as it faces a transition period. To develop a scale for wedding planner selection criteria, preliminary items were prepared based on in-depth interviews with an experienced wedding planner group and a comprehensive review of previous studies, such as studies on selection criteria in the wedding industry and service work similar to wedding planners and wedding planner selection criteria. The preliminary items were tested for content validity using a focus group interview, comprising people in the wedding industry, and were refined accordingly. Then, the definitive quantitative questionnaire items were developed after conducting a preliminary survey. The main survey for this study was conducted using the responses of 295 consumers taking an Internet questionnaire. Exploratory factor analysis, Cronbach's alpha, and confirmatory factor analysis were adopted to develop the scale, which was tested for convergent validity and discriminant validity. This study is academically significant in that it developed a selection criteria scale tailored to wedding planners to address an area that has not been covered in previous studies. It is recommended that future studies conduct empirical analyses using the selection criteria developed in this study to compare influential variables that could affect behavior intention.

• 기술혁신연구
• /
• 제22권3호
• /
• pp.193-223
• /
• 2014

최근 환경문제에 대한 구조적인 해결책을 찾는 과정에서 사회-기술 시스템이 하나의 핵심적인 분석단위가 되고 있다. 또한 지속가능성이라는 복잡한 도전과제에 대응하기 위해 전환이론에 관한 연구도 활발히 이루어지고 있다. 본 논문은 이와 같은 지속가능한 사회-기술 전환을 거버닝하기 위해 어떻게 접근할 수 있는지의 문제를 정부의 관점에서 다루고 있다. 보다 구체적으로, 전환이론과 거버넌스 이론을 접목하여 사회-기술 전환을 위한 정책 거버넌스를 유형화함으로써, 전환목표 달성을 위한 정부의 역할모델과 전환정책 설계를 위한 실천적 프레임워크를 제시하는 것을 목적으로 한다. 이를 위해 사회적 조정수준과 전환압력이 발생하는 위치를 전환정책 거버넌스를 유형화화기 위한 핵심 맥락으로 설정하고, 주도적 정책 거버넌스, 촉진적 정책 거버넌스, 조정적 정책 거버넌스, 설득적 정책 거버넌스 등 4가지 거버넌스 유형을 도출하여 각각의 특징과 사례를 논의하였다. 이와 같은 접근은 분석적 측면에서 각 유형별로 전환을 촉진하는 정책기능의 차이를 비교할 수 있는 가이드라인을 제공하는 한편, 규범적 측면에서는 정책입안자가 어떻게 효과적인 전환정책을 설계할 수 있을 것인지에 대한 판단기준을 제공하는데 기여할 수 있다. 또한 이론적 측면에서는 혁신정책 관점의 전환이론을 기존의 거버넌스 이론과 접목함으로써, 양 연구의 간극을 줄이고 전환에 대한 거버넌스적 고찰을 구체적인 전환이론과 연계하는데 기여할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제9권6호
• /
• pp.368-376
• /
• 1988

Transition metal PSSA ionomers containing Co(II), Ni(II), Cr(III), Ru(III), and Rh(III) are investigated by IR, Far-IR, UV-Vis and DSC. Reliable IR Spectroscopic criteria are established for assessing the degree of ion-exchange of PSSA ionomers and the local structures around metal cations in them. In the hydrated transition metal PSSA ionomers, the ionic groups are solvated by water molecules and there is no significant interactions between sulfonate group and metal cations. The visible spectra indicated that metal cations are present as [M$(H_2O)_6$]$^{n+}$ with Oh symmetry. Their $T_g$ values increase as the extent of ionic site concentration increases, but there is no direct dependence of $T_g$ on the nature of metal cations or their oxidation states. Thus, the water content in PSSA ionomer is found to have dominant influence on $T_g$ of hydrated transition metal PSSA ionomers. Dehydration of the hydrated transition metal PSSA ionomers results in direct interaction between ionic groups and significant color changes of the ionomers due to the changes of the local structures around metal cations. On the base of spectral data, their local structures are discussed. In case of dehydrated 12.8 and 15.8 mol % transition metal PSSA ionomers, no glass transition is observed in 25-$250^{\circ}C$ region and this is believed to arise from the formation of highly crosslinked structures caused by direct coordination of sulfonate groups of metal cations. In the 6.9 mol % transition metal PSSA ionomers, the glass transition is always observed whether they are hydrated or dehydrated and this is though to be caused by the sufficient segmental mobility of the polymer backbone.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.