• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.355-360
• /
• 1990

One of the possible ways to make a flexible wire of high-Tc superconductiong ceramics is the extrusion of a mixture slurry of superconducting powder with an appropriate polymer binder. The fabrication procedure for $YBa_2Cu_3O_{7-{\delta}}$ superconducting coils with this plastic mass is described. The major factors limiting the formation of extruded wire are the binder content, powder size, and entrapped gas in the mixture slurries. The optimum content of binder for both good flexbility and strength of wire was estimated to be 30wt%. The finer the powder size is, the more homogeneous structure the extruded wire has. The vacuum degassing before extrusion was necessary to remove the entrapped gas in as-extruded wire. The formability of wire depends greatly on the wire radius and binder content. After burning out the binder and the successive sintering, the contacts between the superconducting grains could be made. The resistivity vs. temperature behavior measured in the final wire showed the transition temperature of 90K with narrow transition width. However, the critical current densities of these wires are much lower in comparison to those of conventional bulk specimens.

• 열처리공학회지
• /
• 제4권3호
• /
• pp.47-53
• /
• 1991

In this study, the structural phase transition and decomposition of superconducting ceramic, Y-Ba-Cu-O system was studied. The results of the study are as follows. The high Tc superconductor $Y_2Ba_2Cu_3O_{7-x}$ is made in solid state reaction of $O_2$ atmosphere and the valve of X in $Y_2Ba_2Cu_3O_{7-x}$ is 0.1~0.2. The transition temperature of tetragonal-orthorhombic phase of $Y_2Ba_2Cu_3O_{7-x}$ appear at $790^{\circ}C-900^{\circ}C$. In the result of measuring the electrical resistance of sample annealed in $O_2$ atmosphere, the electrical resistance show zero at 92 K and the best superconductor, $Y_2Ba_2Cu_3O_{7-x}$(Y 123) can be mabe.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.60-60
• /
• 2011

Giant magnetoresistance (GMR), tunneling magnetoresistance (TMR), and magnetic random-access memory (MRAM) are currently active research areas in spintronics. The high magnetoresistance and the high spin polarization (P) of electrons in the ferromagnetic electrodes of tunnel junction or intermediate layers are required. Magnetite, Fe3O4, is predicted to possess as half-metallic nature, P ~ 100% spin polarization, and has a high Curie temperature (TC~850 K). Experiments demonstrated that the P~($80{\pm}5$)%, ~($60{\pm}5$)%, and ~40-55% for epitaxial (111), (110) and (001)-oriented Fe3O4 thin films, respectively. Epitaxial Fe3O4 films may enable us to investigate the effects of half metals on the spin transport without grain-boundary scattering.In addition, it has been reported that the Verwey transition (TV, a first order metal-insulator transition) of 120 K in bulk Fe3O4 is strongly affected by many parameters such as stoichiometry and stress, etc. Here we report that the growth modes, magnetism and transport properties of Fe3O4 thin films were strongly dependent on the oxygen pressure during film growth. The average roughness decreases from 1.021 to 0.263 nm for the oxygen pressure increase from $2.3{\times}10-7$ to $8.2{\times}10^{-6}$ Torr, respectively. The 120 K Verwey transition in Fe3O4 was disappeared for the sample grown under high oxygen pressure.

• 한국식품영양학회지
• /
• 제10권2호
• /
• pp.234-240
• /
• 1997

식품산업을 포함한 다양한 분야에서 이용되고 있는 한천의 용도를 개발하기 위하여 각종 물리적인 처리가 한천의 열적 특성에 미치는 영향과 각 처리에 다른 표면구조의 변화를 조사하였다. 시차주사 열량분석기를 이용하여 w사한 일반한천의 흡열개시온도(To), 최대흡열점의 온도(Tp) 및 흡열완료온도(Te)는 81.20, 95.51 및 $112.14^{\circ}C$였으며, 분무건조한천은 60.11, 76.45 및 $89.54^{\circ}C$였고, 압출성형한천은 41.30, 61.72 및 $80.50^{\circ}C$로 압출성형한천이 가장 낮은 온도에서 진행되었다. 또한 엔탈피도 일반한천 3.22cal/g, 분무\ulcorner한천 1.53cal/g, 압출성형한천 0.73cal/g의 순서로 압출성형한천에서 가장 낮았다. 완전히 가열용해한 각 한천을 다시 냉각, 응고 후에 다시 승온하였을 때의 To, Tp 및 Te는 일반한천 80.70, 95.61 및 $110.92^{\circ}C$, 붐무건조한천 79.54, 93.76 및 $109.84^{\circ}C$, 압출성형한천 79.25, 93.19 및 $108.77^{\circ}C$로 한천의 종류에 따른 차이는 없었다. 엔탈피 역시 큰 차이를 보이지 않았다. 광학현미경과 주사전자현미경에 의해 표면구조를 관찰한 결과, 일반한천의 경우 단단한 구조로 균열이나 기공들이 관찰되지 않았고, 분무건조한천은 많은 미세입자들이 다량으로 느슨하게 붙어있는 다공질구조로 외부에 노출되는 표면적이 넓었으며, 압출성형한천은 굴곡, 요철 및 균열이 생겨서 수분침투가 용이한 구조를 이루고 있었다.

• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.24-30
• /
• 2003

The preparation of $PbTiO_3$ powder was carried out using the oxide starting material by hydrothermal method. The powder of a crystalline phase with perovskite structure was synthesized. The optimum conditions for the preparation of powder were as follows; hydrothermal solvent; 8M-KOH or 8M-NaOH, reaction temperature; 250~$270^{\circ}C$, run time; 10 h. The ,shape of synthesized powders were well developed crystalline faces with specific surface area of about 2.3 $\textrm m^2$/g in KOH solution and about 5.0 $\textrm m^2$/g in NaOH solution. The cell parameters of powder were a = 3.90$\AA$, c = 4.14 $\AA$ and cell volume was 57.30 $\AA^3$. The cell ratio (c/a) of powder was the same as the theoretical ratio with c/a = 1.06 and the phase transition temperature(Tc) of the powders was about $470^{\circ}C$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.221-224
• /
• 2003

Recently, the market share of the thin-film-transistor liquid-crystalline-display (TFT-LCD) is growing rapidly in display device market. The backlight unit is used as a light source of TFT-LCD module. A light-guide is one of several important components of backlight unit. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. The result of this test, V-groove pattern shows different shapes depends on the temperature of mold surface, contact time of mold and depth of V-groove.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.352-354
• /
• 2010

The effects of Au addition on the structure and the superconducting properties of Bi system bulk have been investigated. Au exists in the metalic form in above materials. It does not affect the formation and structure of the BiSrCaCuO(2223) phase. The superconducting transition temperature Tc does not change for $Bi_{1.7}Pb_{0.3}Sr_2Ca_2Cu_3O$ composite However Au doping can make the grains smaller. Metallic Au can make gathers on the grains boundary and lead to the increment of critical transport current density. The current density of $Bi_{1.7}Pb_{0.3}Sr_2Ca_2Cu_3Au_{0.5}O$ was 1000A/$cm^2$ at liquid nitrogen temperature.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.404-407
• /
• 2016

In this study, to develop low temperature sintering capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3$ (BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of $B_2O_3$ addition on the dielectric properties and microstructure was investigated. The XRD patterns demonstrated that all the specimens showed Perovskite phase, and secondary phases are indicated in the measurement range of XRD. And also, temperature coefficient of capacitance(TCC) of all the specimen sintered at $1,180^{\circ}C$ showed +3~-56% except for x=0.006. For all the specimens, observed one peak was tetragonal cubic difuse phase transition temperature(Tc), which is located in the vicinity of room temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.293-295
• /
• 1994

Barium Titanate ($BaTiO_3$) is one of the few titanateds which is cubic at room temperature. It has the perovskite structure, high dielectric constant (${\varepsilon}_r=300$) and a small temperature coefficient of resistance due to it's Low transition temperature ($Tc=120^{\circ}c$). PTCR (Positive Temperature Coefficient of Resistivity) thermistor in thin film $BaTiO_3$ system was prepared by using radio frequency (13.56MHz) and BC magnetron sputter equipment. Polycrystalline, and surface structure characteristics of the specimens were measured by X-ray diffraction (D-Max3, Rigaku, Japan), SEM(Scanning Electron Microscopy: M. JSM84 01, Japan), respectively. Temperature at below $600^{\circ}C$, $1000^{\circ}C$ to $700^{\circ}C$, and above $1100^{\circ}C$ for spotted $BaTiO_3$ thin films showed the amorphous, degree of crystal growth, and polycrystalline, respectively.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1337-1345
• /
• 1994

Glasses in the system of 45CaO-25TiO2-30P2O5 containing 1 mole% of M2O(M=Li, Na, K) were melted and crystallized. And their crystal phases were Ca3(PO4)2, CaTi4(PO4)6, and TiO2. Porous glass-ceramics with skeleton of two crystal phase CaTi4(PO4)6 and TiO2 were prepared by selective leaching of Ca3(PO4)2 with 0.1 N-HCl. Glass transition temperature(Tg) and crystallization temperature(Tc) were decreased by addition of 1 mole% alkali metal oxide. Pore size of porous glass-ceramics was increased with increasing heat treatment temperature and its dependence on heat treatment temperature was decreased with addition of Na2O and K2O. It was found that porous glass-ceramics of parent glass and containing 1mole% M2O(M=Li, Na, K) composition had maximum specific surface area, porosity and maximum of crystallzed phase by heat treatment at 80$0^{\circ}C$, 76$0^{\circ}C$, 78$0^{\circ}C$, 80$0^{\circ}C$ respectively.