• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.161-169
• /
• 2000

AGT(Automated Guide-way Transit System) was introduced to satisfy the every increasing need for improved urban transportation. The AGT system is classified as medium distance and demand capacity mass transit being introduced for such area with inadequate passenger demand for railway construction but excessive demand for bus service. To decrease initial investment cost it is important that we have to secure the technology system of Light Rail Transit for Korea environment. By utilizing the finite element analysis, the result in this paper is enough to satisfy the strength whish is required. Also for the purpose of safety, it is decided the thickness and frame structure of the undeframe section through the analysis. It is known that carbody is no problem for required design conditions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.3
• /
• pp.23-35
• /
• 2013

It is very important that the calculation of railroad track capacity in infrastructure investment analysis and train operation planning. The dwelling time is one of the factors that influence in railroad track capacity. Current research in dwelling time has been focusing on theoretical investigation, the state of the research in effective variable (dwelling time etc) is insufficient. In this paper, we clearly draw the concept of railroad track capacity and the estimate on modeling of relationship railway demand and dwelling time. Also, we compare and analyze the variation of railroad track capacity according to transit railway demand in Gyeongin Line (Guro~Inchon). This paper is expected to contribute for improving on the in-using equations and methods in train operation planning as well as for improving level of service on railway user.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.816-822
• /
• 2010

A comprehensive review for the selection of urban rail vehicle systems that best suit Gimpo railway line is taking place with consideration of the project area characteristics in light of line planning, passenger demand, supply of rolling stock, and railway construction and operation. Various aspects of vehicle systems including passenger demand on concerned lines, regional characteristics, vehicle types, and railway construction and operational settings should be taken into consideration. In addition, request for the introduction of customized vehicle systems reflecting the convenience of transit users such as wide and hospitable inner space, low noise, flexible operation of 2 to 4 car train-set and eye catching slim bridge piers is increasing. A study on alternatives to place an order to opt for optimum rolling stock systems considering line characteristics of Gimpo City's urban railway and future passenger demand while meeting the needs of Gimpo City has been conducted.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.554-562
• /
• 2007

To increase the demand of HR Plate with thickness up to 22mm, it is necessary that HR Plate is applicable to full member in steel bridge including main girder. In this study, availabilities of the narrow steel box girder of light railway transit with HR Plate width as a main member are discussed. Computational analysis is performed in 15 bridge models of light railway transit with beam element and plate element. As an analysis results, three models in tight railway transit are presented. In conclusion, it is validated that HR Plate can be applying to narrow steel box girder in the light railway transit.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.129-137
• /
• 2013

This study This study aims to identify sound developmental directions for transit-oriented development (TOD), which is a topic of interest in the field of urban development, and conducts an empirical analysis of station influence areas within Seoul according to the characteristics of transit types. The results suggest that there are differences among variables that influence demand for public transportation according to transit types. This means that it is necessary to identify improvement plans in developing public transport strategies for the capital region based on such differentiated influence factors and to build foundations to continue to increase demand for public transportation. Also, station influence areas should be developed into hubs by establishing appropriate bus-only lane networks as a supplementary means, rather than directly connecting subway stations with each other.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.171-181
• /
• 2010

The integrated transit fare system of Seoul metropolitan area has given positively evaluated with reduction of user cost and activating the transfer behavior from its opening year, July 2007. However, there were only few research about railway demand forecasting methodology, especially mode share, has conducted under the integrated fare system. This study focuses on the utility estimation by each mode under the integrated fare system, and on the coefficient actualization relates on travel time and travel cost estimation with Household Travel Survey Data 2006. Also the railway demand analysis methodology under various fare systems is presented. The methodology from this study is expected to improve accuracy and usefulness in railway demand analysis.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.203-210
• /
• 1998

Rail transport has grown over the Past decades, and rail networks have highly concentrated in urban area, and it is possible for rail passengers to choose a route anions a number of alternative routes. Analysis of factors influencing the choice of route, are required to estimate the rail travel demand of each route. In this paper, we describes route choice model for the transit assignment and characteristics of the route choice(i.e., by relative travel time and fares), and attempts to estimate travel demand of new rail transit based on the slated preference(SP) survey data of Nanko Porttown, which is located in Osaka, Japan.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.365-375
• /
• 2006

The HR Plates made hot rolled coils is lower than general structural steel plates in price. No difference between general steel plates and HR Plates with thickness up to 22mm are found in most characters such as cutting operation, fabrication and even welding. It can be concluded that HR Plates with thickness up to 22mm can be applied to flanges and webs of any girders as well as longitudinal ribs, longitudinal and vertical stiffeners of steel bridges appropriately. To increase the demand of HR Plates with thickness up to 22mm, it is necessary that HR Plates is applicable to full member in steel bridge including main girder.In this study, availabilities of the narrow steel box girder of light railway transit with HR Plate width as a main member are discussed. For application of HR Plate to steel bridge with 50m span or more, new support systems in three types are presented. Computational analysis is performed in 15 bridge models of light railway transit with beam element and plate element. As a analysis results, three models in light railway transit are presented. We finally come to the conclusion that HR Plates can be apply to narrow steel box girder in the light railway transit.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1683-1688
• /
• 2008

These days, in Korea, according to improving the standard living, people generally work 5 days a week and it results more leisure hours. On weekends or in specific season, travel to mountain region around the major city is much in demand, and, in case of public transportation, the demand exceeds the supply. So, people tend to go other places, even overseas, for their holidays. The situation in Korea reflects the needs for mountainous light rail transit system with the object of convenient and rapid transport of passengers. In this paper, the guideline for mountainous light rail transit planing is proposed, and the representative mountainous light rail transit system is analyzed to choose the proper mountainous light rail transit system which adapts the demand for transportation and the terrain in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.671-677
• /
• 2011

A diversity of railway network function enhancement projects such as the double tracking, electrification, and direct operation have been actively executed to improve the railway service. When the new rapid transit is provided, how many people will use it instead of other transports? How will the railway choice behavior be changed? Accordingly, in this paper, the applicability of diverted travel demand forecast methods, by Revealed Preference(RP) and Stated Preference(SP) data was reviewed for Daegu metropolitan rail rapid transit service. As the result of combining RP and SP data, including the sequential and simultaneous approach, the total travel time and travel cost parameters are of the right sign and are highly significant. The simultaneous approach is more efficient in terms of the estimation of coefficients. In particular, methods to improve validity of the Mixed RP/SP models, when RP data is used proportionally, the diverted travel demand can be easily identified by railway fare and travel time service level. Therefore, it is considered that this will practically apply even in other regions as well as Daegu metropolitan railway.