• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.219-232
• /
• 2023

Mobility services need to change according to the regional characteristics of the target service area. Accordingly, analysis of mobility patterns and characteristics based on Origin-Destination (OD) data that reflect travel behaviors in the target service area is required. However, since conventional methods construct the OD data obtained from the administrative district-based zone system, it is hard to ensure spatial homogeneity. Hence, there are limitations in analyzing the inherent travel patterns of each mobility service, particularly for new mobility service like Demand Responsive Transit (DRT). Unlike the conventional approach, this study applies a data-driven clustering technique to conduct spatial analyses on OD travel patterns of regional mobility services based on reconstructed OD data derived from re-aggregation for original OD distributions. Based on the reconstructed OD data that contains information on the inherent feature vectors of the original OD data, the proposed method enables analysis of the spatial characteristics of regional mobility services, including public transit bus, taxi and DRT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5191-5198
• /
• 2010

Although numerous studies have analyzed the relationship between subway travel demand (STD) and various characteristics of subway catchment area (SCA), a few studies examined the relationship between STD and the structure of pedestrian networks within each SCA. Hence, this study evaluates the structure of pedestrian networks within 79 SCAs in the city of Busan using Space syntax and investigates the relationship between STD and several characteristics of SCA including the spatial structure of pedestrian network. The analysis results show that the spatial integration of pedestrian networks within the SCAs, which represents the magnitudes of walking accessibility to subway station, is positively associated with STD among the three spatial indexes such as integration, connectivity, and intelligibility. In addition, the results show that STD significantly increases as the number of travel gathering facilities and the average floor area ratio within the SCAs increase. This study ultimately corroborates that designing the grid pedestrian network and assigning the travel gathering facilities to the compact buildings within SCAs are needed to ameliorate the spatial structure of SCA in the city of Busan as transit-oriented development system.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.630-638
• /
• 2015

The total number of passengers on the KTX since its construction in 2004 surpassed 500 million in October, 2015. The operation of KTX made it possible to reach anywhere in a country in half a day, which subsequently altered people's lifestyle. As the KTX has become an important mode of transportation, there is a growing interest in the optimal size and location of its stations. Currently, the stations are constructed through public-private partnerships since a sufficient amount of budget is hard to secure only from the public sector; however, because railway stations are traditionally aimed at promoting public interests, an emphasis on the profitability of the private sector could compromise public interests. At this juncture, this study separately computes the number of users based on each of the two primary functions of the stations-as a railway station and as a sales facility-and estimates the numbers of people according to various transportation modes that are taken to access the stations. This estimation is applied to the case of Dongdaegu Station, which will open in 2016. Such an application helps to predict and respond to possible congestion as brought about by the expansion of the sales facility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.85-91
• /
• 2021

In contrast to standard train tracks, tramlines are often set along public roads, with trams running among pedestrians and other vehicles. In some cities and towns, trams and buses share the same routes and stations. Under the current investment appraisal system, trams are classified into light rail when predicting traffic demand and calculating benefits, but in the case of non-capital areas, it is notable that the origin-destination and transit lines of buses are not provided in the Korea Transport Database distribution data. Due to this problem, it is difficult to reflect proper mode changing behaviors between route buses and trams. This study examines the impact on tramlines of bus routes that are not currently considered in non-capital areas. Following an analysis of the effect of tram projects according to whether bus routes are considered or not, an improvement in methodology is proposed. Through this study, it is expected that the investment appraisal system for the planning of new tramlines will be improved in the future.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.465-475
• /
• 2016

Since inaccurate demand estimation for recent urban rail construction may result in financial burden to cities, precise prediction for operating cost as well as construction costs is necessary to avoid or reduce budget loss of the local or central government. The operating cost is directly related to the public fare and affect a policy to determine the rate system. Therefore, there is a pressing need to develop an estimating model for reliable operating cost of urban railway. This study introduces a new model to estimate the operating cost with new variables. It provides a better prediction in accuracy and reliability compared to the existing model, considering the feature of urban railway. For verification of our model, railway operation data from a few cities for the last five years were comprehensively examined to determine variables that affect the operating cost. The operating cost was estimated in a dummy regression model using five independent variables, which were average distance between stations, daily trains distance, total passenger capacity of a train in a train, driving mode(manned/unmanned), and investment type(financial/private).

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.595-603
• /
• 2019

To alleviate the demand on private car that is constantly increasing, Busan Metropolitan City (BMC) has established Bus Rapid Transit (BRT) to revitalize public transportation. But there are no unified lane system between BRT and general bus stations, which makes off-lane turning general bus to contribute to congestion. And as the bottleneck phenomenon at entrance/exit accelerates the congestion, there has been huge dissatisfaction among commuting drivers. Therefore, this study identifies efficient methods to operate better through measuring civilian awareness. We evaluate both satisfaction and drawbacks on BRT service with Importance-Performance Analysis (IPA). We first distinguish the groups by the awareness on BRT and their main transit usage, and then clarify the difference between the groups. And as a result, the group who is positive to BRT and uses buses often demands improvement in bus indoor comfort and curbing jaywalking. On the other hand, group who is negative to BRT and uses private cars often demands improvement in lane changing and the moving speed of private cars. We next examines the groups with MDPREF, one method of Multidimensional Scaling (MDS). And we have clarified that the evaluating criteria and the individual attributes of the groups corresponds very well.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.3
• /
• pp.20-33
• /
• 2021

Modern society is steadily implementing policies to encourage public transportation to cope with the growing traffic demand on limited roads. The expectation is rising for transit signal priority to ensure the speed of buses as the installation of the bus rapid transit(BRT) expands nationwide to secure the competitiveness of buses. On the other hand, the form of BRT stops without considering some aspects of bus operation may increase the number of stops on the bus, thereby reducing the effectiveness of bus signal priority applications. This study suggests the type of bus stop to increase the operation efficiency of buses by analyzing the bus signal priority effect according to the BRT station type using Hannuri-daero, Sejong. The bus signal priority is used to maximize the two-way bandwidth of passenger cars and buses. As a result of the application, the effectiveness of the bus signal priority at the stop causing the double stop of the bus was reduced drastically, and the efficiency of the bus signal priority was increased significantly after improvement. These results are expected to be used as basic data in the form of proper bus stops considering the aspects of traffic operation when designing BRT stops in new towns in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2447-2453
• /
• 2013

In this study, the effects of weather conditions such as rainfall, discomfort index, snowfall, and sensible temperature on public transport demand in Seoul were analyzed using statistical data. The reasons were also derived from the survey. The data for the analysis were collected over the weekdays and weekends, and seasonal data of summer and winter were also gathered separately. Rainfall amount, discomfort index, and sensible temperature except snowfall amount, whose samples were insufficient, decreased the public transport demand by 2-7%. Rainfall amount and sensible temperature were statistically significant. Correlation analysis also showed that rainfall amount and sensible temperature are highly correlated with the demand. To find the reasons, the survey was conducted on citizens living in the Seoul Metropolitan Area. About 30% of the respondents wished to give up using bus when rainfall was heavy or temperature was low. On the contrary, auto and subway users increased by 10%. The results of this study could be used as the basic data when the public transportation planning or operation related policies according to the weather condition are concerned.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.259-263
• /
• 2004

In the manufacture progress of LCD or semiconductor, there are used many kinds of gas like erosion gas, dilution gas, toxic gas as a progress which used these gas there are required high puritize to increase accumulation rate of semiconductor or LCD materials work progress of semiconductor or LCD it demand many things like the material which could minimize metallic dust that could be occured by reaction between gas and transfer pipe laying material, illumination of the surface, emition of the gas, metal liquation, welding etc also demand quality geting stricted. Material-Low-sulfur-contend (0.007-0010), vacuum-arc-remelt(VAR), seamless, high-purity tubing material is recommend for enhance welding lower surface defect density All wetted stainless steel surface must be 316LSS elecrto polishinged with ${\leq}0.254{\mu}m$($10.0{\mu}in$) Ra average surface finish, $Cr/Fe{\geq}1.1$ and $Cr_2O_3$ thickness ${\geq}25{\AA}$ From the AES analytical the oxide layer thickness (23.5~36 angstroms silicon dioxide equivalent) and chromum to iron ratios is similar to those generally found on electropolished stainless steel., molybdenum and silicon contaminants ; elements characteristic of stainless steel (iron, nickel and chromium); and oxygen were found on the surface Phosphorus and nitrogen are common contaminants from the electropolish and passivation steps.