• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.49-54
• /
• 2009

지진동에 대한 사면의 안정성은 일반적으로 지진계수를 이용하여 지진하중을 유사정적 하중으로 단순화하여 한계평형법으로 평가된다. Transient 지진동은 지진계수를 이용하여 정적하중으로 대체된다. 하지만, 유사정적 해석결과에 절대적인 영향을 미치는 지진계수는 합리적인 물리적 근거 없이 산정된다. 또한 내진설계기준에 의거하여 산정되는 최대가속도는 사면의 진동특성을 반영한다고 볼 수 없으며, 이를 정확하게 예측하기 위해서는 2차원 동적해석을 수행해야 한다. 본 연구에서는 수정된 1차원 동적해석과 유사정적해석을 연결한 Hybrid 유사정적 해석법을 제안하였다. 기존의 해석기법은 깊이에 따라서 변이하는 가속도를 고려할 수 없기에 신뢰성 있는 사면의 안정성 예측이 어려운 실정이다. 수정된 1차원 지반응답해석은 깊이에 따른 사면 무게변화를 모델링하기 위하여 층의 밀도를 조정하였으며 위치별 진동가속도를 예측하기 위해서 다수의 해석을 수행하였다. 2차원 유한요소해석과 비교한 결과, 수정된 1차원 해석은 2차원 해석과 일치성이 우수한 것을 확인할 수 있었다. 해석결과를 유사정적해석에 입력하여 깊이에 따라서 변이하는 가속도 주상도를 적용하였으며 기존의 해석방법으로 계산된 안전율과 비교하였다. 비교 결과, 계산된 안전율에는 큰 차이가 발생하는 것으로 나타났으며, 기존의 해석기법으로 안전율을 예측할 경우, 매우 비현실적인 값을 계산할 수 있다. 본 연구에서 개발된 기법은 해석의 신뢰성을 현격하게 향상시키는 것으로 나타났다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.368-376
• /
• 1999

본 논문은, 대표적인 FACTS기기중의 하나인 싸이리스터제어 병렬보상기의 특성 연구를 수행한다. 이를 위하여 푸리에 공간에서 전력조류 조건을 만족하는 싸이리스터 점호각을 수치해석적으로 구하고, 그 계산 결과를 이용하여 정상상태 및 고조파 특성을 해석하였다. 그리고, Poincare Mapping 이론을 이용한 스위칭 주파수영역에서 안정도 해석과 EMTP 시뮬레이션을 이용한 시평면상에서 해석결과의 검증 및 여러 운전점에서 과도응답특성의 비교연구를 수행하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.71-78
• /
• 2010

The stability analysis of unsaturated infinite slope under rainfall-induced infiltration condition was performed using the generalized effective stress that unifies both saturated and unsaturated condition recently proposed by Lu and Likos(2004, 2006). The Soil-Water Characteristic Curve (SWCC) of the sand with the relative density of 75% was first measured for both drying and wetting processes. The Hydraulic Conductivity Function (HCF) and Suction Stress Characteristic Curve (SSCC) were subsequently estimated. Also, under the rainfall-induced infiltration condition transient seepage analysis of unsaturated infinite slope was performed using the finite element program, SEEP/W. Based on these results, the stability of unsaturated infinite slope under rainfall-induced infiltration condition was examined considering the suction stress. According to the results, the negative pore water pressure and water content within the soil changed with time due to the infiltration. Also, the variation of those caused the variation of suction stress and then the factor of safety of slope changed consequently during the rainfall period.

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.45-53
• /
• 2006

Turbo-blower as an air supply system is one of the most important BOP (Balance of Plant) systems for FCV(Fuel Cell Vehicle). For generating and blowing compressed air, the motor of air blower consumes maximum 25% of net power, and fuel cell demands a clean air. In this study, turbo-blower supported by air foil bearings is introduced as the air supply system used by 80kW proton exchange membrane fuel systems. The turbo-blower is a turbo machine which operates at high speed, so air foil bearings suit their purpose as bearing elements. Analysis for confirming the stability and endurance is conducted. The rotordynamic stability was predicted using the numerical analysis of air foil bearings and it is verified through experimental works. In spite of various transient dynamic situation, the turbo-blower had stable performances. After the performance test, results are presented. The normal power of driving motor has about 1.6 kW with the 30,000 rpm operating range and the flow rate of air has maximum 160 SCFM. The test results show that the aerodymic performance and stability of turbo-blower are satisfied to the primary goals.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.542-550
• /
• 2017

Aiming at the deficiencies of power sharing control performances when a traditional droop control is adopted for microgrid inverters, this paper proposes a microgrid inverter power sharing control strategy based on a virtual synchronous generator. This control method simulates the electromechanical transient characteristics of a synchronous generator in a power system by an ontology algorithm and the control laws of a synchronous generator by control over the speed governor and excitation regulator. As a result, that the microgrid system is able to effectively retain the stability of the voltage and frequency, and the power sharing precision of the microgrid inverter is improved. Based on an analysis of stability of a microgrid system controlled by a virtual synchronous generator, design thoughts are provided for further improvement of the power sharing precision of inverters. The simulation results shows that when the virtual synchronous generator based control strategy was adopted, the power sharing performances of microgrid inverters are improved more obviously than those using the droop control strategy.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.474-478
• /
• 2008

It has been shown that a nanofluid consisting of nanoparticles dispersed in base fluid has much higher effective thermal conductivity than pure fluid. In this study, four kinds of nanofluids such as multiwalled carbon nanotube (MWCNT) in water, CuO in water, SiO2in water, and CuO in ethylene glycol, are produced. Their thermal conductivities are measured by a transient hot-wire method. The thermal conductivity of water-based MWCNT nanofluid is shown to be increased by up to 11.3% at a volume fraction of 0.01. The measured thermal conductivities of MWCNT nanofluids are higher than those calculated with Hamilton-Crosser's model due to neglecting solid-liquid interaction at the interface. The results show that the thermal conductivity enhancement of nanofluids depends on the thermal conductivities of both particles and the base fluid. Stability of nanofluids is estimated by UV-vis spectrum analysis. Stability of nanofluid depends on the type of base fluid and the suspended particles. Also it can be improved in addition of a surfactant.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.91-98
• /
• 2007

This paper presents the induced mathematical modeling equations for evaluating the operation stability with automatic transmission of heavy duty vehicle. This theoretical approach indicates that linearized governing equations of system can be converted into eigen-value problems. if the eigen-value has positive number, we can predict the engine operating point locates an unstable operating region. To be a stable state, the unstable operating point diverges toward a stable point which is able to maintain uniform velocity. Based on the previous theoretical analysis, we carry out dynamic simulation to show the behavior of engine operating point and torque converter in transient state. As a result of the dynamic simulation, the suggested theoretical method is found to be reasonable for evaluating the operation stability of a torque converter. In addition, the numerical results explain the engine stops and fluctuating phenomenon in reality.

• 농업과학연구
• /
• 제39권3호
• /
• pp.427-439
• /
• 2012

In this study, an experiment with large-scale model was performed according to raising embankment in order to investigate the behaviour of failure due to overtopping. The pore water pressure, earth pressure and settlement by high water level, a rapid drawdown and overtopping were compared and analyzed. Also, seepage analysis and slope stability analysis were performed for steady state and transient conditions. The pore water pressure and earth pressure for inclined core type showed high value at the base of the core, but they showed no infiltration by leakage. The pore water pressure and earth pressure by overtopping increased at the upstream slope and core, it is considered a useful data that can accurately estimate the possibility of failure of the reservoir. The behavior of failure due to overtopping was gradually enlarged towards the downstream slope from reservoir crest, and the inclined core after the raising embankment was influenced significantly to prevent the reservoir failure. The pore water pressure distribution for steady state and transient condition showed positive (+) pore water pressure on the upstream slope, it was gradually changed negative (-) pore water pressure on the downstream slope. The pore water pressure by overtopping showed a larger than the high water level at the downstream slope, it was likely to be the piping phenomenon because the hydraulic gradients showed largely at the inclined core and reservoir crest. The safety factor showed high at the steady state, and transient conditions did not show differences depending on the rapid drawdown.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1408-1416
• /
• 1990

본 연구에서는 과도 연성 열탄성문제의 해를 구할때 사용되는 직접시간적분방 법과 Laplace 변환방법은 상호 장 단점을 가지고 있다. 각 방법들의 장단점은 서로 배타적이므로 서로의 장점을 살리는 수치방법이 필요하다. 그런데, 대부분의 과도 열탄성문제는 급격한 온도변화로 인한 물체의 변형에 관심이 있기때문에 이 형태의 문 제를 효율적으로 다루는 데 주안점을 두고 본 연구를 수행하였다. 유도된 유한요소 방정식은 결국 열탄성 지배 방정식 중 열전달방정식인 에너지보존식은 Gurtin의 범함 수로부터 유도된 원래의 형태를 사용하나 수치적 안정성(numerical stability)을 보장 하기 위하여 운동방정식은 시간에 대한 2차미분 형태로 수정하였다. 에너지보존식은 시간에 대한 합성적분(convolution)형태로 표현되므로 온도의 시간미분항이 소거되므 로 경계에서의 급격한 온도변화로 인한 수치 해석적 문제점은 간단히 해결된다. 그 러므로, 제안된 수치해법은 직접시간적분방법의 일종이나 결과식인 유한요소방정식은 기존의 문헌들과 상당한 차이가 있다. 과도 연성 열탄성해석을 위한 새로운 근사수 치해법의 장점을 이론적으로 설명하기보다 수치계산면에서의 안전성, 정확성 및 효율 성이 있음을 증명하기 위하여 이미 발표된 문헌들에서 다룬 예제를 선정하여 해석결과 를 비교하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.154-164
• /
• 2019

A rotor dynamic analysis is mandatory for stability and design optimization of submerged propellers and turbines. An accurate simulation requires a proper consideration of fluid-induced reaction forces. This paper presents a bi-directional coupling of a bond graph method solver and an unsteady vortex lattice method solver where the former is used to model the rotor dynamics of the power train and the latter is used to predict transient hydrodynamic forces. Due to solver coupling, determination of hydrodynamic coefficients is obsolete and added mass effects are considered automatically. Additionally, power grid and structural faults like grid fluctuations, eccentricity or failure could be investigated using the same model. In this research work a fast, time resolved dynamic simulation of the complete power train is conducted. As an example, the rotor dynamics of a tidal stream turbine is investigated under two inflow conditions: I - shear flow, II - shear flow + water waves.