• 제목/요약/키워드: Transient process

검색결과 793건 처리시간 0.029초

가토 근위세뇨관 Basolateral Membrane Vesicle에서 Succinate 이동 특성 (Succinate Transport in Rabbit Renal Basolateral Membrane Vesicles)

  • 김용근;배혜란;임병용
    • The Korean Journal of Physiology
    • /
    • 제22권2호
    • /
    • pp.307-318
    • /
    • 1988
  • 가토 신장 피질에서 Percoll density gradient방법으로 분리한 basolateral membrane vesicle (BLMV)에서 rapid filtration technique을 이용하여 succinate의 이동 특성을 관찰하였다. $Na^+$은 succinate의 이동을 증가시켜 "overshoot"현상을 보였으며 이러한 효과는 $K^+,{\;}Li^+,{\;}Rb^+,{\;}choline$과 같은 다른 양이온들에 의해 나타나지 않았다. $Na^+$농도변화에 따른 succinate의 이동율은 sigmoid모양을 보였고, $Na^+$에 대한 Hill coefficient는 2.0이었다. soccinate의 이동은 vesicle 내부가 음전압일 때 더욱 증가되었다. BLMV에서 succinate이동은 용액내 pH변화에 따라 영향을 받았으나 brush border membrane vesicle (BBMV)에서는 영향을 받지 않았다. 동력학적 분석결과 succinate의 Km값은 $15.5{\pm}0.94{\;}{\mu}M$이었고 Vmax는 $16.22{\pm}0.25{\;}n{\;}mole/mg{\;}protein/min$이었다. succinate의 이동은 $4{\sim}5$탄소를 가진 dicarboxylate들에 의해 강력하게 억제되었으나 monocarboxylate나 다른 유기음이온들에 의해 영향을 적게 받거나 받지 않았다. succinate의 이동은 DIDS, SITS, furosemide와 같은 음이온 이동 억제제와 harmaline과 같은 $Na^+$ 이동 억제제에 의해 억제되었다. 이들 결과들은 BLMV에서 succinate는 $Na^+$에 의존하여 이동하며 다른 Krebs cycle중간 산물들과 동일한 운반기전을 이용함을 가르킨다. 또한 BLMV에서 succinate의 이동은 그 기질특이성에 있어서 다른 연구자에 의해 보고된 BBMV에서 이동특성과 유사함을 보였다.

  • PDF

칼슘, 베라파밀, 란타눔이 흰쥐 자궁근의 자발적 수축과 칼륨 경축에 미치는 효과 (Effects of $Ca^{++}$, Verapamil and $La^{+++}$ on the Spontaneous Contraction and K-contracture in the Isolated Rat Uterine Smooth Muscle)

  • 황상익
    • The Korean Journal of Physiology
    • /
    • 제18권1호
    • /
    • pp.37-50
    • /
    • 1984
  • The effects of $Ca^{++}$ and its antagonists (verapamil and $La^{+++}$) upon the spontaneous contraction and the contracture induced by 60 mM K-Tyrode solution were studied in the isolated uterine muscle. Longitudinal muscle strips were prepared from the rat uteri at estrous stage. All experiments were performed in tris-buffered Tyrode solution which was aerated with 100% $O_2$ and kept at 35^{\circ}$. The results obtained were as follows: 1) In the uterine strips contracting spontaneously, both the amplitude of peak tension and the area of contraction curve increased dose-dependently in the range of $0.5${\sim}8$ mM $Ca^{++}$. The frequency of contraction increased as the concentration of $Ca^{++}$ increased up to 2 mM, but above this concentration the frequency decreased. In $Ca^{++}-free$ media, however, contraction did not develop. In the contracture induced by 60 mM K-Tyrode solution, the developed tension increased dose-dependently as the concentration of external $Ca^{++}$ increased to 8 mM. In the absence of external $Ca^{++}$ K-contracture appeared, but it was not sustained. 2) The spontaneous contraction of rat uterus was suppressed by verapamil in proportion to an increase of its concentration and totally abolished at the concentration of $3{\times}10^{-4}\;g/l$, but the spontaneous contraction re-appeared by addition of $Ca^{++}$. The amplitude of peak tension recovered completely but the recovery of frequency was incomplete. K-contracture decreased in a dose-dependent manner after the treatment with verapamil and totally disappeared at its concentration of $3{\times}10^{-4}\;g/l$. Even in this case contracture developed again by extra $Ca^{++}$. 3) The spontaneous contractile activity was inhibited by $La^{+++}$. At the concentration of $10^{-4}$M $La^{+++}$, fibrillation appeared. In the strip inhibited by $10^{-5}M\;La^{+++}$, contractility recovered completely by extra $Ca^{++}$ while in the $10^{-4}M\;La^{+++}$ treated preparation, the rhythmic spontaneous contraction did not develop even at the concentration of 16 mM $Ca^{++}$. After the initial transient depression of contracture tension by $10^{-3}M$ of $La^{+++}$, the strip stowed considerably large size of contracture, hardly influenced by external $Ca^{++}$ or verapamil. The results obtained in this experiment suggest that in the rat uterine muscle there would be some competitive actions between $Ca^{++}$ and its antagonists. It is speculated that $Ca^{++}$ plays an important role in the conduction of excitation, and $La^{+++}$ influences upon cellular $Ca^{++}$ mobilization and re-uptake process as well as transmembrane $Ca^{++}$ transport in a K-depolarized state.

  • PDF

선상가열 판변형 해석을 위한 고유변형도 영역의 결정법 (Determination of Inherent Strain Regions to Estimate Plate Deformation by Line Heating)

  • 장창두;하윤석;고대은;문성춘
    • 대한조선학회논문집
    • /
    • 제39권1호
    • /
    • pp.82-89
    • /
    • 2002
  • 선상가열에 의한 판 변형 예측은 고유변형도법에 의해 효율적으로 예측할 수 있다. 종래의 용접에서의 고유변형도 결정 방법은 용접 실험을 통하여 온도분포와 강의 상변태 영역(Ac3)을 시편을 절단하여 계측하고 이를 고유변형도 영역으로 간주하는 것이었다. 선상가열의 현상은 용접과 유사하므로, 용접과 같은 조건 하에서 얻어진 결과를 그대로 선상가열 해석에 이용하여 왔으나 이 결과는 가열 패턴이나 판 두께에 제한을 가지고 있다. 또한 현장에서는 선상가열 후 수냉 처리하는데 그 과정에서 강이 원래의 상으로 돌아가지 않고 마르텐사이트가 되면서 전단 소성 변화를 일으킨다는 점에 착안하여, 본 연구에서는 종래에 시편의 온도계측과 상변태 영역을 직접 계측하는 파괴검사법을 FEM을 이용한 이론해석으로 대체하였다. 즉 임의의 적절한 열속 모델에 대한 온도 분포를 얻고, 조직변화에 따라 추가적으로 발생하는 소성 영역을 고려하기 위하여 공석 온도 영역까지 포함시켜 온도계측과 파괴실험 없이 순수한 이론만으로 고유변형도 영역을 결정하는 새로운 방법을 제안하였다. 이 방법으로 결정한 영역을 이용하여 판의 변형을 예측하고 실험 결과와 비교하여 잘 일치함으로써 본 논문에서 제안한 방법의 유효성을 입증하였다.

블레이드 손상에 따른 이축식 터보팬 엔진의 동적 안정성 해석 (Rotordynamic Analysis of a Dual-Spool Turbofan Engine with Focus on Blade Defect Events)

  • 김시태;정기현;이준호;박기현;양광진
    • Tribology and Lubricants
    • /
    • 제36권2호
    • /
    • pp.105-115
    • /
    • 2020
  • This paper presents a numerical study on the rotordynamic analysis of a dual-spool turbofan engine in the context of blade defect events. The blades of an axial-type aeroengine are typically well aligned during the compressor and turbine stages. However, they are sometimes exposed to damage, partially or entirely, for several operational reasons, such as cracks due to foreign objects, burns from the combustion gas, and corrosion due to oxygen in the air. Herein, we designed a dual-spool rotor using the commercial 3D modeling software CATIA to simulate blade defects in the turbofan engine. We utilized the rotordynamic parameters to create two finite element Euler-Bernoulli beam models connected by means of an inter-rotor bearing. We then applied the unbalanced forces induced by the mass eccentricities of the blades to the following selected scenarios: 1) fully balanced, 2) crack in the low-pressure compressor (LPC) and high pressure compressor (HPC), 3) burn on the high-pressure turbine (HPT) and low pressure compressor, 4) corrosion of the LPC, and 5) corrosion of the HPC. Additionally, we obtained the transient and steady-state responses of the overall rotor nodes using the Runge-Kutta numerical integration method, and employed model reduction techniques such as component mode synthesis to enhance the computational efficiency of the process. The simulation results indicate that the high-vibration status of the rotor commences beyond 10,000 rpm, which is identified as the first critical speed of the lower speed rotor. Moreover, we monitored the unbalanced stages near the inter-rotor bearing, which prominently influences the overall rotordynamic status, and the corrosion of the HPC to prevent further instability. The high-speed range operation (>13,000 rpm) coupled with HPC/HPT blade defects possibly presents a rotor-case contact problem that can lead to catastrophic failure.

습식 TCE 분해반응에서 CoO2/TiO2 촉매의 반응활성 및 표면화학적 구조 (On-stream Activity and Surface Chemical Structure of CoO2/TiO2 Catalysts for Continuous Wet TCE Oxidation)

  • 김문현;추광호
    • 한국환경과학회지
    • /
    • 제14권2호
    • /
    • pp.221-230
    • /
    • 2005
  • Catalytic wet oxidation of trichloroethylene (TCE) in water has been conducted using $TiO_2-supported$ cobalt oxides at $36^{\circ}C$ with a weight hourly space velocity of $7,500\;h^{-1}.\;5\%\;CoO_x/TiO_2$, prepared by using an incipient wetness technique, might be the most promising catalyst for the wet oxidation although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. XPS spectra of both fresh and used Co surfaces gave different surface spectral features for each $CoO_x,\;Co\;2P_{3/2}$ binding energy for Co species in the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $CO_2TiO_4\;and\;CoTiO_3$. The used catalyst exhibited a 780.3-eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD patterns for $5\%\;CoO_x/TiO_2$ catalyst indicated that the phase structure of Co species in the catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present predominantly on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.

The Effect of Remifentanil Preconditioning on Injured Keratinocyte

  • Hong, Hun Pyo;Kim, Cheul Hong;Yoon, Ji Young;Kim, Yong Deok;Park, Bong Soo;Kim, Yong Ho;Yoo, Ji Uk
    • 대한치과마취과학회지
    • /
    • 제14권3호
    • /
    • pp.157-165
    • /
    • 2014
  • Background: Incisional site of surgical operation become transient ischemic state and then occur reoxygenation due to vasodilatation by inflammatory reaction, the productive reactive oxygen species (ROS) give rise to many physiologic results. Apoptosis have major role on elimination of inflammatory cell and formation of granulation tissue in normal wound healing process. Remifentanil can prevent the inflammatory response and can suppress inducible nitric oxide synthase expression in a septic mouse model. After cardiopulmonary bypass for coronary artery surgery, remifentanil can also inhibit the release of biomarkers of myocardial damage. Here we investigated whether remifentanil pretreatment has cellular protective effect against hypoxia-reoxygenation in HaCaT human keratinocytes, if so, the role of apoptosis and autophagy on this phenomenon. Methods: The HaCaT human keratinocytes were exposed to various concentrations of remifentanil (0.01, 0.05, 0.1, 0.5 and 1 ng/ml) for 2 h before hypoxia (RPC/HR group). These cells were cultured under 1% oxygen tension for 24h at $37^{\circ}C$. After hypoxia, to simulate reoxygenation and recovery, the cells were reoxygenated for 12 h at $37^{\circ}C$. 3-MA/RPC/HR group was treated 3-methyladenine (3-MA), autophagy inhibitor for 1h before remifentanil treatment. Cell viability was measured using a quantitative colorimetric assay with thiazolyl blue tetrazoliumbromide (MTT, amresco), showing the mitochondrial activity of living cells. To investigate whether the occurrence of autophagy and apoptosis, we used fluorescence microscopy and Western blot analysis. Results: The viability against hypoxia-reoxygenation injury in remifentanil preconditioning keratinocytes were increased, and these cells were showed stimulated expression of autophagy 3-MA suppressed the induction of autophagy effectively and the protective effects on apoptosis. Atg5, Beclin-1, LC3-II and p62 were elevated in RPC/HR group. But they were decreased when autophagy was suppressed by 3-MA. Conclusions: Remifentanil preconditioning showed the protective effect in human keratinocytes, and we concluded that autophagy may take the major role in the recovery of wound from hypoxia-reoxygenation injury. We suggest that further research is needed about the cell protective effects of autophagy.

Minimum 2-Year Follow-Up Result of Degenerative Spinal Stenosis Treated with Interspinous U ($Coflex^{TM}$)

  • Park, Seong-Cheol;Yoon, Sang-Hoon;Hong, Yong-Pyo;Kim, Ki-Jeong;Chung, Sang-Ki;Kim, Hyun-Jib
    • Journal of Korean Neurosurgical Society
    • /
    • 제46권4호
    • /
    • pp.292-299
    • /
    • 2009
  • Objective : Clinical and radiological results of posterior dynamic stabilization using interspinous U (ISU, $Coflex^{TM}$, Paradigm Spine $Inc.^{(R)}$, NY, USA) were analyzed in comparison with posterior lumbar interbody fusion (PLIF) in degenerative lumbar spinal stenosis (LSS). Methods : A retrospective study was conducted for a consecutive series of 61 patients with degenerative LSS between May 2003 and December 2005. We included only the patients completed minimum 24 months follow up evaluation. Among them, 30 patients were treated with implantation of ISU after decompressive laminectomy (Group ISU) and 31 patients were treated with wide decompressive laminectomy and posterior lumbar interbody fusion (PLIF; Group PLIF). We evaluated visual analogue scale (VAS) and Oswestry Disability Index (ODI) for clinical outcomes (VAS, ODI), disc height ratio disc height (DH), disc height/vertebral body length ${\times}100$), static vertebral slip (VS) and depth of maximal radiolucent gap between ISU and spinous process) in preoperative, immediate postoperative and last follow up. Results : The mean age of group ISU ($66.2{\pm}6.7$ years) was 6.2 years older than the mean age of group PLIF ($60.4{\pm}8.1$ years; p=0.003). In both groups, clinical measures improved significantly than preoperative values (p<0.001). Operation time and blood loss was significantly shorter and lower in group ISU than group PLIF (p<0.001). In group ISU, the DH increased transiently in immediate postoperative period ($15.7{\pm}4.5%{\rightarrow}18.6{\pm}5.9%$), however decreased significantly in last follow up ($13.8{\pm}6.6%$, p=0.027). Vertebral slip (VS) of spondylolisthesis in group ISU increased during postoperative follow-up ($2.3{\pm}3.3{\rightarrow}8.7{\pm}6.2$, p=0.040). Meanwhile, the postoperatively improved DH and VS was maintained in group PLIF in last follow up. Conclusion : According to our result, implantation of ISU after decompressive laminectomy in degenerative LSS is less invasive and provides similar clinical outcome in comparison with the instrumented fusion. However, the device has only transient effect on the postoperative restoration of disc height and reduction of slip in spondylolisthesis. Therefore, in the biomechanical standpoint, it is hard to expect that use of Interspinous U in decompressive laminectomy for degenerative LSS had long term beneficial effect.

Development of an Improved Numerical Methodology for Design and Modification of Large Area Plasma Processing Chamber

  • 김호준;이승무;원제형
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.221-221
    • /
    • 2014
  • The present work proposes an improved numerical simulator for design and modification of large area capacitively coupled plasma (CCP) processing chamber. CCP, as notoriously well-known, demands the tremendously huge computational cost for carrying out transient analyses in realistic multi-dimensional models, because electron dissociations take place in a much smaller time scale (${\Delta}t{\approx}10-8{\sim}10-10$) than time scale of those happened between neutrals (${\Delta}t{\approx}10-1{\sim}10-3$), due to the rf drive frequencies of external electric field. And also, for spatial discretization of electron flux (Je), exponential scheme such as Scharfetter-Gummel method needs to be used in order to alleviate the numerical stiffness and resolve exponential change of spatial distribution of electron temperature (Te) and electron number density (Ne) in the vicinity of electrodes. Due to such computational intractability, it is prohibited to simulate CCP deposition in a three-dimension within acceptable calculation runtimes (<24 h). Under the situation where process conditions require thickness non-uniformity below 5%, however, detailed flow features of reactive gases induced from three-dimensional geometric effects such as gas distribution through the perforated plates (showerhead) should be considered. Without considering plasma chemistry, we therefore simulated flow, temperature and species fields in three-dimensional geometry first, and then, based on that data, boundary conditions of two-dimensional plasma discharge model are set. In the particular case of SiH4-NH3-N2-He CCP discharge to produce deposition of SiNxHy thin film, a cylindrical showerhead electrode reactor was studied by numerical modeling of mass, momentum and energy transports for charged particles in an axi-symmetric geometry. By solving transport equations of electron and radicals simultaneously, we observed that the way how source gases are consumed in the non-isothermal flow field and such consequences on active species production were outlined as playing the leading parts in the processes. As an example of application of the model for the prediction of the deposited thickness uniformity in a 300 mm wafer plasma processing chamber, the results were compared with the experimentally measured deposition profiles along the radius of the wafer varying inter-electrode gap. The simulation results were in good agreement with experimental data.

  • PDF

벼의 small ubiquitin-like modifier E3 ligase, OsSIZ1 돌연변이체의 특성 분석 (Characterization of small ubiquitin-like modifier E3 ligase, OsSIZ1, mutant in rice)

  • 박형철;구성철;김훈;최원균;윤대진
    • Journal of Plant Biotechnology
    • /
    • 제39권4호
    • /
    • pp.235-241
    • /
    • 2012
  • 식물체에서 sumoylation 기작은 성장 및 발달에 중요한 기능을 수행할 것이다. 특히, SUMO E3 ligase는 SUMO 단백질을 목적 단백질로 전달해주는 마지막 단계의 sumoylation 기작 구성요소이며, 다양한 신호전달에 특이성을 나타내는 것으로 보고되고 있다. 본 연구에서는 벼에서 SUMO E3 ligase, SIZ1 유전자에 T-DNA가 삽입된 Ossiz1-2 돌연변이 식물체를 분석하였다. 그리고, OsSIZ1 단백질이 OsSUMO1 단백질과 상호작용함으로써 OsSIZ1이 SUMO E3 ligase의 기능을 수행할 것으로 예측하였다. Ossiz1-2 돌연변이 식물체는 형태학적으로 발달과 성장의 다양한 부분에서 미성숙상태로 유지됨이 보였다. 특히, 야생형인 동진벼와 비교하여 초장의 성장 및 등숙율에서 상당히 낮은 정도를 보여 주었다. 이와 같이, 벼에서 SUMO E3 ligase로써 OsSIZ1 단백질의 생리학적인 기능은 성장과 발달 그리고, 수확량에 관여하는 단백질을 sumoylation 시키는 기작에서 역할을 수행할 것으로 사려된다.

액적 배열의 증발과 착화에 관한 수치해석적 연구 (Numerical Study of Evaporation and Ignition of in-line Array Liquid Droplets)

  • 김충익;송기훈
    • 한국화재소방학회논문지
    • /
    • 제13권1호
    • /
    • pp.37-47
    • /
    • 1999
  • 부유중인 분진의 화재 및 용기 또는 파이프의 미세한 균열에서 비산되는 가연성 액체의 분무화재의 위험성은 착화후의 고속 확산과 높은 열방출율로 인하여 매우 높은 것으로 알려졌다. 이에 대한 연구는 주로 실험적으로나 또는 거시적인 관점의 해석으로 제한되어 왔다. 본 연구는 미시적인 관점의 해석으로서 분진 및 분무를 가연성 미세 액적으로 가정하여 그의 증발과 착화에 대하여 연구하였다. 첫 단계로서 일열의 액적 배열을 계산영역으로 하여, 비정상 이차원 보존방정식들을 적용하였다. 수치해석은 일반화된 비직교 좌표계를 사용하였고, 화학반응은 Arrhenius의 법칙에 의하여 반응속도가 제어되는 일단계 반응을 고려하였다. 계산결과는 액적 주위의 온도와 반응물질의 농도분포를 시간에 따라 보여준다. 주위의 산소가 증발하는 액적의 연료와 섞이기 시작하고 착화 조건에 다다르면, 급격한 발열반응이 예혼합된 가스로부터 일어나기 시작한다. 최대온도 영역은 점차적으로 액적 표면으로 이동하며 최대온도는 착화이후 급격히 상승한다. 연료와 산소의 농도는 최대온도 영역 근처에서 최소값을 보인다. 따라서 착화순간에는 예혼합연소의 양상을 띠는 것으로 나타났다. 이후에는 예혼합 가스의 소멸로 확산연소의 양상을 띠게 된다. 액적간의 거리는 중요한 요소로서 멀리 떨어져 있는 경우부터 액적간의 거리가 가까워지면 착화지연 시간이 줄여들어 착화가 빨리 일어나는 것으로 관찰되었다. 또한 착화 후에는 최대온도 영역이 일열의 중심선으로부터 멀어지는 것으로 나타났는데 이것은 중심부근의 산소가 먼저 소모되고 외부로부터의 산소공급도 화염에 의해 차단되어 나타나는 현상이다. 이번 연구로 미세적인 착화현상에 대한 이해를 높이게 되었고 추후 복잡한 배열에 대한 연구도 가능할 것이다.

  • PDF