• Nuclear Engineering and Technology
• /
• 제17권4호
• /
• pp.256-266
• /
• 1985

냉각재 유량상실 사고가 가압경수형 원자로인 고리 1호기에 대하여 해석되었다. 냉각재 유량 상실 사고는 그 심각도에 따라 다음과 같이 3가지로 분류된다. 즉, 일부 유량 상실사고, 완전 유량 상실 사고, 그리고 펌프 축 고착 사고이다. 사고 해석은 계통 과도 현상 및 평균 노심분석, DNBR 계산, 그리고 고온점 분석의 3단계로 수행된다. 원자로 계통과도 현상 코드인 KTRAN이 본 사고를 빠른 시간에 모사할 수 있도록 개발되었다. DNBR계산을 위해서는 열수력학 코드인 SCAN및 COBRA IV-I가 채택되었으며, 고온점 분석을 위해서는 연료봉 과도 현상 코드인 LTRAN이 쓰였다. 이러한 전산코드 시스템은 과도 현상 해석에 빨리 응답하여야 한다. 왜냐하면 사고가 발생한 후 수 초안에 심각한 상태에 이르기 때문이다. 불행히도 KTRAN코드에 의하여 이러한 목적은 충족되지 않았다. 그러나 다른 계통 해석 코드에 비하여 잔은 계산 시간에도 불구하고 KTRAN에 의한 계산 결과는 FSAR의 결과와 전반적으로 잘 일치함으로써 KTRAN코드가 사고 해석에 유용함이 밝혀졌다.

• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.656-664
• /
• 2001

A theoretical analysis is performed to describe the qualitative behavior of transient buoyant flows in a vertical channel. Consideration is given to the case of a fluid with a pre-existing stratification. The fluid motion is generated by giving impulsive anti-symmetric step-changes in temperature at the vertical left ad right sidewalls. The qualitative character of the flow is shown to be classified in the Rayleigh number (Ra)-Prandtl number ($sigma$) diagram. The transitory approach to the steady state can be monotonic or oscillatory, depending on ($sigma$-1)$^2$$pi$$^4$ 4$sigma$$R_a$. The prominent characteristics of time-dependent flow are discussed for large $R_a$. The profiles of temperature and velocity in the transient phase are depicted, which disclose distinctive time scales of motion. The transient process is shown to be sensitive to the Prandtl number. The detailed evolutions of flow and temperature fields are illustrated for large $R_a$.

• 전기의세계
• /
• 제15권1호
• /
• pp.14-19
• /
• 1966

Transient stability analysis of Yongwol-Bupyong power system, which contains Yongwol steam power station, the largest one in Korea, was undertaken by using the Yonsei 101 Analog computer. The critical switching time and phase angle for the present 150MW power flow to be stable were found. And the transient stability power limit for the system was also found. It is concluded that the system becoms unstable if the power flow increases much more than 151MW.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.207-214
• /
• 2006

The current paper focuses the analysis of leakage detection in water pipeline systems by means of the transient method. In order to obtain essential data for evaluation the existing methodology, an extensive experimental process has been carried out in a single pipeline system, Several experimental tests were performed with and without a leakage in the system. Using the unsteady friction and improved unsteady friction factors gives reasonable match between the computed and measured results on the condition of the flow situations presented in the paper. The transient method attempts to estimate the leakage in water pipelines using observed pressure data collected during transient events on the system.

• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.624-631
• /
• 2007

PFA (power flow analysis) has been recognized as a useful method in vibration analysis of medium-to-high frequency ranges. Until now, PFA method has been developed for steady-state vibration problems. In this paper, PFA method has been expanded to transient problem. New energy governing equations are derived considering time dependent terms in beam and plate. Analytic solutions of those equations are found in simple beam and plate, and are verified by comparing with modal solutions.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.47-52
• /
• 2015

The transient phenomenon of self-powered energy-harvesting is assessed using a bond-graph method. The bond-graph is an energy-based approach to describing physical-dynamic systems. It shows power flow graphically, which helps us understand the behavior of complicated systems in simple terms. Because energy-harvesting involves conversion of power in mechanical form to the electrical one, the bond-graph is a good tool to analyze this power flow. Although the bond-graph method can be used to calculate the dynamics of combining mechanical and electrical systems simultaneously, it has not been used for harvesting analysis. We demonstrate the usability and versatility of bond-graph for not only steady analysis but also transient analysis of harvesting.

• 대한물리의학회지
• /
• 제10권1호
• /
• pp.63-69
• /
• 2015

PURPOSE: Low-intensity exercise with transient restriction of blood flow to muscle could be an alternative rehabilitation method which avoids the problems associated with conventional high-intensity exercise. However, the mechanism of low-intensity exercise with transient restriction of blood flow is not clearly known. Thus, the purpose of this study was to investigate the mechanism of improvement of muscular function after low-intensity exercise with transient restriction of blood flow using H-reflex analysis. METHODS: Twenty one healthy young adults with no medical history of neurological or musculoskeletal disorder voluntarily participated in this study. The ${\alpha}$-motor neuron excitability of the triceps surae was assessed using the H-reflex. The amplitude of the M-wave and H-reflex were measured across three conditions: rest, after low-intensity exercise without restriction of blood flow and after low-intensity exercise with restriction of blood flow. The subjects performed low-intensity ankle plantar flexion exercise at their own pace for one minute without or with transient restriction of blood flow achieved by a sphygmomanometer cuff on popliteal fossa at a pressure of 120mm of mercury(120 mmHg). RESULTS: No significant changes of the excitability of the ${\alpha}$-motor neuron were obtained across three different conditions. CONCLUSION: This study found that low-intensity exercise with transient restriction of blood flow did not influence to ${\alpha}$-motor neuron excitability of the triceps surae. From the results, I could come to the conclusion that further study will be required.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.61-66
• /
• 2011

The purpose of this paper is to design a hydraulic actuator to operate under high pressure conditions. The flow characteristics under design conditions of hydraulic actuator were numerically conducted by commercial fluid dynamic code(ANSYS CFX V11). The numerical analysis was performed by transient technique according to the variation of stroke times, which was changed from 0 to 1 second by interval of 0.01. Turbulence model, $k-\omega$ SST was selected to secure more accurate prediction of hydraulic oil flow. The ICEM-CFD 11 and CFXMesher, reliable grid generation software was also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate which was supplied to the hydraulic actuator was 30.4l/min. These results are in good agreement with design results within 3.5% error.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.474-481
• /
• 2001

This paper addresses a numerical method for predicting transient temperature distributions in the wall of a curved pipe subjected to internally thermal stratification flow. A simple and convenient numerical method of treating the unsteady conjugate heat transfer in the non-orthogonal coordinate systems is presented. The proposed method is implemented in a finite volume thermal-hydraulic computer code based on a cell-centered, non-staggered grid arrangement, the SIMPLEC algorithm, a higher-order bounded convection scheme, and the modified version of momentum interpolation method. Calculations are performed for the transient evolution of thermal stratification in two curved pipes, where the one has thick wall and the other has so thin wall that its presence can be negligible in the heat transfer analysis. The predicted results show that the thermally stratified flow and transient conjugate heat transfer in a curved pipe with a finite wall thickness can be satisfactorily analyzed by the present numerical method, and that the neglect of wall thickness in the prediction of pipe wall temperature distributions can provide unacceptably distorted results.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1296-1304
• /
• 2000

A program of steady-state and transient performance analysis for a 200kW-class small turboshaft engine with free power turbine was developed. An existing turbojet engine was used for the gas generator of the developed turboshaft engine, which was modified to satisfy performance requirements of this turboshaft engine. To verify the accuracy of steady-state performance program for this engine: the program was applied to the gas turbine test unit of the same type, and the analysis results were compared with experimental results. The developed transient performance analysis program using the CMF (Constant Mass Flow) method was utilized to analyze the cases of step increase and ramp increase of the fuel.