• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.59-65
• /
• 1990

3차원 비정상류모형을 사용하여 출도대지(出島台地)의 소유역에 있어서 인위적및 자연적 요인이 지하수유동에 미치는 영향에 대하여 고찰하였다. 3차원 비정상류모형의 검정을 위하여, 모형에 의한 수치해석해와 Theis의 해석해를 비교한 결과 서로 좋은 대응을 나타내었다. 모의발생은 용수로(用水路)를 통하여 관개가 시작되는 5월 1일부터 30일간 행하였다. 지하수 유동양상을 포텐샬도로 나타내었으며 그에 대한 고찰이 있었다. 본 해석으로 부터 인위적 영향을 받는 지역의 지하수유동계를 해석하기 위해서는 3차원 비정상류모형이 유용하다고 사료되었다.

• 대한기계학회논문집B
• /
• 제21권12호
• /
• pp.1710-1719
• /
• 1997

An approximate analytical solution for the initial transient process of close-contact melting occurring between a phase change material kept at its melting temperature and an isothermally heated flat surface is derived. The model is so developed that it can cover both rectangular and circular cross-sectional solid blocks. Normalization of simplified model equations in reference to the steady solution enables the solution to be expressed in a generalized form depending on the liquid-to-solid density ratio only. A selected result shows an excellent agreement with the previously reported numerical data, which justifies the present approach. The solution appears to be capable of describing all the fundamental characteristics of the transient process. In particular, dependence of the solid descending velocity oft the density ratio at the early stage of melting is successfully resolved. The effects of other parameters except the density ratio on the transient behaviors are efficiently represented via the steady solution implied in the normalized result. A simple approximate method for estimating the effect of convection on heat transfer across the liquid film is also proposed.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.727-734
• /
• 2020

본 논문은 과도 고장을 가지는 비동기 순차 머신에 대한 내고장성 교정 제어를 다룬다. 본 논문에서 다루는 고장은 머신이 과도 상태 천이를 거칠 때 발현할 수 있으므로 비-기본 모드(non-fundamental mode)에서 원하지 않는 상태 천이를 일으킨다. 본 논문에서는 비동기 순차 머신의 비-기본 모드에서 발생하는 과도 고장을 탐지하고 극복할 수 있는 새로운 내고장성 제어 시스템을 제안한다. 교정 제어 이론의 틀 안에서 내고장성 제어기의 존재 조건과 설계 과정을 제시한다. 또한 제안된 제어 시스템의 효용성을 검증하기 위해 FPGA 실험을 실시한다.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.815-829
• /
• 2012

This paper proposes a nonlinear computational modeling approach for the behaviors of structural systems subjected to fire. The proposed modeling approach consists of fire dynamics analysis, nonlinear transient-heat transfer analysis for predicting thermal distributions, and thermomechanical analysis for structural behaviors. For concretes, transient heat formulations are written considering temperature dependent heat conduction and specific heat capacity and included within the thermomechanical analyses. Also, temperature dependent stress-strain behaviors including compression hardening and tension softening effects are implemented within the analyses. The proposed modeling technique for transient heat and thermomechanical analyses is first validated with experimental data of reinforced concrete (RC) beams subjected to high temperatures, and then applied to a bridge model. The bridge model is generated to simulate the fire incident occurred by a gas truck on April 29, 2007 in Oakland California, USA. From the simulation, not only temperature distributions and deformations of the bridge can be found, but critical locations and time frame where collapse occurs can be predicted. The analytical results from the simulation are qualitatively compared with the real incident and show good agreements.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.545-553
• /
• 2016

The failure probabilities of the reactor pressure vessel (RPV) for low temperature over-pressurization (LTOP) and cool-down transients are calculated in this study. For the cool-down transient, a pressure-temperature limit curve is generated in accordance with Section XI, Appendix G of the American Society of Mechanical Engineers (ASME) code, from which safety margin factors are deliberately removed for the probabilistic fracture mechanics analysis. Then, sensitivity analyses are conducted to understand the effects of some input parameters. For the LTOP transient, the failure of the RPV mostly occurs during the period of the abrupt pressure rise. For the cool-down transient, the decrease of the fracture toughness with temperature and time plays a main role in RPV failure at the end of the cool-down process. As expected, the failure probability increases with increasing fluence, Cu and Ni contents, and initial reference temperature-nil ductility transition ($RT_{NDT}$). The effect of warm prestressing on the vessel failure probability for LTOP is not significant because most of the failures happen before the stress intensity factor reaches the peak value while its effect reduces the failure probability by more than one order of magnitude for the cool-down transient.

• Steel and Composite Structures
• /
• 제29권5호
• /
• pp.569-578
• /
• 2018

This paper aims to investigate the transient vibration behavior of functionally graded carbon nanotube (FG-CNT) reinforced nanocomposite plate resting on Pasternak foundation under pulse excitation. The plate is considered to be composed of matrix material and multi-walled carbon nanotubes (MWCNTs) with distribution as per the functional grading concept. The functionally graded distribution patterns in nanocomposite plate are explained more appropriately with the layer-wise variation of carbon nanotubes weight fraction in the thickness coordinate. The layers are stacked up in such a way that it yields uniform and three other types of distribution patterns. The effective material properties of each layer in nanocomposite plate are obtained by modified Halpin-Tsai model and rule of mixtures. The governing equations of an illustrative case of simply-supported nanocomposite plate resting on the Pasternak foundation are derived from third order shear deformation theory and Navier's solution technique. A converge transient response of nanocompiste plate under uniformly distributed load with triangular pulse is obtained by varying number of layer in thickness direction. The validity and accuracy of the present model is also checked by comparing the results with those available in literature for isotropic case. Then, numerical examples are presented to highlight the effects of distribution patterns, foundation stiffness, carbon nanotube parameters and plate aspect ratio on the central deflection response. The results are extended with the consideration of proportional damping in the system and found that nanocomposite plate with distribution III have minimum settling time as compared to the other distributions.

• 대한한의학회지
• /
• 제39권4호
• /
• pp.1-15
• /
• 2018

Objectives: Cerebral ischemia results from a variety of causes that cerebral blood flow is reduced due to a transient or permanent occlusion of cerebral arteries. Reactive astrocytes and microglial activation plays an important role in the neuronal cell death during ischemic insult. Acupunctural treatment is effective for symptom improvement in cerebrovascular accident, including cerebral ischemia. Methods: In the present study, the effects of acupuncture at the ST40 acupoint on short-term memory and apoptosis in the hippocampal CA1 region following transient global cerebral ischemia were investigated using gerbils. Transient global ischemia was induced by occlusion of both common carotid arteries with aneurysm clips for 5 min. Acupuncture stimulation was conducted once daily for 7 consecutive days, starting one day after surgery. Results: In the present results, ischemia induction deteriorated short term memory, increased apoptosis, and induced reactive astrocyte and microglial activation. Acupuncture at ST40 acupoint ameliorated ischemia-induced short-term memory impairment by suppressing apoptosis in the hippocampus through down-regulation of reactive astrocytes and microglial activation. Conclusion: The present study suggests that acupuncture at the ST40 acupoint can be used for treatment of patients with cerebral stroke.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.242-247
• /
• 2010

To consider effects of essential parameters of water impact pressure on dynamic structural responses of bow bottom structures, a parametric study for a ship bottom panel is carried out. The idealized pressure time history models were assumed by triangular and rectangular shapes in time domain. The main loading parameters are duration time and peak pressure value maintaining the same impulse value. The structural models for local bottom stiffened panels of a container ship are analysed. The natural frequency analysis and transient dynamic response analysis are performed using MSC/NASTRAN. Added mass effects of contacting water are considered and the pressure distributions are assumed to be uniform in the whole water contacting surface. The effects of loading parameters on the structural responses, especially maximum displacements, are considered. Besides the peak pressure value, effects of duration time correlated with natural frequencies are thought to be the important parameters.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.617-625
• /
• 2003

Effects of Injector nozzle geometry and operating pressure conditions such as opening pressure, ambient pressure. and injection pressure on the transient fuel spray behavior have been examined by experiments. In order to clarify the effect of internal flow inside nozzle on the external spray, flow details Inside model nozzle and real nozzle were alto investigated both experimentally and numerically. for the effect of injection pressures, droplet sizes and velocities were obtained at maximum line pressure of 21 MPa and 105 MPa. Droplet sizes produced from the round inlet nozzle were larger than those from the sharp inlet nozzle and the spray angle of the round inlet nozzle was narrower than that from the sharp inlet nozzle. With the increase of opening pressure, spray tip penetration and spray angle were increased at both lower ambient pressure and higher ambient pressure. The velocity and size profiles maintained similarity despite of the substantial change in injection pressure, however, the increased injection pressure produced a higher percentage of droplet that are likely to breakup.