• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.260-260
• /
• 2017

This study aims to compare the performance of TRIGRS (Transient Rainfall Infiltration and Grid-based Regional Slope-stability model) and TiVaSS (Time-variant Slope Stability model) in the prediction of rainfall-induced shallow landslides. TRIGRS employs one-dimensional (1-D) subsurface flow to simulate the infiltration rate, whereas a three-dimensional (3-D) model is utilized in TiVaSS. The former has been widely used in landslide modeling, while the latter was developed only recently. Both programs are used for the spatiotemporal prediction of shallow landslides caused by rainfall. The present study uses the July 2011 landslide event that occurred in Mt. Umyeon, Seoul, Korea, for validation. The performance of the two programs is evaluated by comparison with data of the actual landslides in both location and timing by using a landslide ratio for each factor of safety class ( index), which was developed for addressing point-like landslide locations. In addition, the influence of surface flow on landslide initiation is assessed. The results show that the shallow landslides predicted by the two models have characteristics that are highly consistent with those of the observed sliding sites, although the performance of TiVaSS is slightly better. Overland flow affects the buildup of the pressure head and reduces the slope stability, although this influence was not significant in this case. A slight increase in the predicted unstable area from 19.30% to 19.93% was recorded when the overland flow was considered. It is concluded that both models are suitable for application in the study area. However, although it is a well-established model requiring less input data and shorter run times, TRIGRS produces less accurate results.

• 한국철도학회논문집
• /
• 제20권3호
• /
• pp.320-328
• /
• 2017

철도차량에 폭 넓게 적용되고 있는 축상고무스프링의 노화에 따른 탈선안전도 영향을 분석하고자 노화 축상고무스프링 시료를 대상으로 특성시험을 수행하였다. 그리고 축상고무스프링 노화가 탈선 안전에 미치는 영향을 분석하기 위하여 주행 동특성 해석을 수행하였다. 사용연수 17년이 지난 롤고무 축상스프링 시료를 대상으로 한 상하방향 특성시험결과, 고무 노화로 인하여 변위 복원기능이 저하되었고 스프링강성이 현저히 증가하였다. 그리고 EN14363규격 적용 twist궤도 주행 시를 모사한 주행동특성 해석결과, 정상 차량모델(Case1)에 비하여 노화 축상스프링 특성을 적용한 차량모델(Case2)의 탈선계수와 윤중감소가 증가하여 탈선안전도는 저하하였다. 특히 급격한 선형 변동이 발생하는 천이구간 주행 시 윤중감소로 인한 탈선안전도는 취약하게 나타났다.

• Perinatology
• /
• 제29권4호
• /
• pp.159-164
• /
• 2018

Objective: To compare neonatal respiratory morbidity of twins according to birth order related to gestational age and mode of delivery. Methods: We performed the retrospective research of the medical records of 3,224 neonates (1,612 twin pairs) born in a single center from January 2011 to December 2015. Subjects were classified into four gestational age groups: very (<32 weeks), moderate (32-33 weeks), late (34-36 weeks) preterm, and term (${\geq}37weeks$) groups. We investigated clinical characteristics and respiratory morbidity according to birth order related to gestational age group and mode of delivery. Results: We found increased risk of respiratory morbidity in second-born twin than first-born twin (P=0.039). Second-born twin was associated with increased risk of respiratory distress syndrome (RDS) in late preterm group (odds ratio [OR] 2.8, 95% confidence interval [CI] 1.30-5.95), and transient tachypnea of newborn in term group (OR 1.4, 95% CI 1.03-1.81). In vaginal delivery mode, there was no difference of respiratory morbidity between first and second-born twin in each group, but in cases of Cesarean delivery, second-born twin was related with a greater risk of RDS in late preterm group (OR 2.3, 95% CI 1.07-5.09). Birth order and Cesarean section independently increased the risk of RDS (adjusted OR [aOR] 1.69, 95% CI 1.12-2.54; aOR 2.14, 95% CI 1.25-3.66, respectively). Conclusion: Second-born twin and Cesarean delivery are associated with increased risk of RDS, especially in late preterm twins.

• 화약ㆍ발파
• /
• 제37권1호
• /
• pp.14-23
• /
• 2019

암석이나 콘크리트와 같은 취성재료의 경우에는 역학적 강도의 하중속도 의존성을 보임에 따라 발파 및 충격해석에 있어 이를 반영코자 하는 노력이 증가하고 있다. 이와 같은 암석의 동적강도의 경우에는 순간적으로 높은 하중이 작용하는 동적하중의 가압특성에 따라 시험편 내의 응력평형상태를 고려한 평가가 수행되어야함이 제안된 바 있다. 본 연구에서는 스플릿 홉킨슨 압력봉 장비를 이용한 포천 화강암의 동적일축압축강도 실험을 통해 응력평형조건의 충족 유무에 따른 암석의 동적파괴과정 및 역학적 강도특성에 대해 고찰하였다. 연구결과 적절한 응력평형상태가 이루어지진 않은 상태에서 평가된 암석의 동적일축압축강도는 상대적으로 과소평가되는 것으로 나타났으며, 이는 하중의 가압면에서 발생하는 조기파괴에 따른 에너지 파괴에너지 손실 및 변형률속도 과대평가에 의한 것으로 판단되었다. 결론적으로 합리적인 동적강도 평가를 위해서는 암석의 변형거동특성에 대한 분석 및 파괴패턴에 대한 검토를 통한 응력평형조건의 세밀한 검증이 수반되어야 할 것으로 판단하였다.

• The Korean Journal of Pain
• /
• 제32권3호
• /
• pp.178-186
• /
• 2019

Background: Epidural steroid injections (ESIs) have been widely used in managing spinal pain. Dexamethasone has recently emerged as a useful drug in this setting, relative to particulate steroids, although the associated systemic effects have not been fully elucidated. This study aimed to investigate the incidences and types of systemic effects after fluoroscopically guided ESI with dexamethasone. Methods: This retrospective study included 888 ESIs with dexamethasone (fluoroscopically guided at the cervical and lumbosacral levels) performed on 825 patients during January to June 2017. Data regarding systemic effects were collected via telephone interviews using a standardized questionnaire at 2 weeks after the procedure. Data on patient demographic, clinical, and procedural characteristics were collected and analyzed to identify factors that were associated with systemic effects. All statistical analyses were performed using the chi-squared test. Results: Among the 825 patients, 40 patients (4.8%) experienced systemic effects during the 2-week follow-up period. The most common systemic effect was facial flushing (12 patients, 1.5%), which was followed by urticaria (7 patients, 0.8%) and insomnia (7 patients, 0.8%). A history of spine surgery was significantly associated with the occurrence of systemic effects (P = 0.036). Systemic effects were significantly more common for injections at the cervical level than at the lumbar level (P = 0.019). Conclusions: Approximately 4.8% of the patients who underwent ESI with dexamethasone experienced minor and transient systemic effects. These effects were more common in patients who had undergone a previous spine surgery or received a cervical ESI.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• Journal of Yeungnam Medical Science
• /
• 제38권3호
• /
• pp.202-207
• /
• 2021

Background: Trigeminal neuralgia (TN) is a severe, paroxysmal pain in the distribution of the fifth cranial nerve. Microvascular decompression (MVD) is the most widely used surgical treatment for TN. We undertook this study to analyze the effects of and complications of MVD and to refine the surgical procedure for treating TN. Methods: A total of 88 patients underwent for TN underwent surgery at our hospital. Among them, 77 patients underwent MVD alone, and 11 underwent partial sensory rhizotomy (PSR) with or without MVD. The medical records of these patients were retrospectively analyzed for patient characteristics, clinical results, offending vessels, and complications if any. Results: The mean follow-up duration was 43.2 months (range, 3-216 months). The most common site of pain was V2+V3 territory (n=27), followed by V2 (n=25) and V3 (n=23). The most common offending vessels were the superior cerebellar artery and anterior inferior cerebellar artery in that order. The overall rate of postoperative complications was 46.1%; however, most complications were transient. There were two cases of permanent partial hearing disturbance. In the MVD alone group, the cure rate was 67.5%, and the improvement rate was 26.0%. Among 11 patients who underwent PSR with or without MVD, the cure rate was 50.0%, and the improvement rate was 30.0%. Conclusion: The clinical results of MVD were satisfactory. Although the outcomes of PSR were not as favorable as those of pure MVD in this study, PSR can be considered in cases where there is no significant vascular compressive lesion or uncertainty of the causative vessel at the surgery.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.23-34
• /
• 2020

Two-phase flow and heat transfer characteristics during the reflood phase of a single heated rod in the KHU reflood experimental facility were examined. Two-phase flow behavior during the reflooding experiment was carefully visualized along with transient temperature measurement at a point inside the heated rod. By numerically solving one-dimensional inverse heat conduction equation using the measured temperature data, time-resolved wall heat flux and temperature histories at the interface of the heated rod and coolant were obtained. Once water coolant was injected into the test section from the bottom to reflood the heated rod of >700℃, vast vapor bubbles and droplets were generated near the reflood front and dispersed flow film boiling consisted of continuous vapor flow and tiny liquid droplets appeared in the upper part. Following the dispersed flow film boiling, inverted annular/slug/churn flow film boiling regimes were sequentially observed and the wall temperature gradually decreased. When so-called minimum film boiling temperature reached, the stable vapor film between the heated rod and coolant was suddenly collapsed, resulting in the quenching transition from film boiling into nucleate boiling. The moving speed of the quench front measured in the present study showed a good agreement with prediction by a correlation in literature. The obtained results revealed that typical two-phase flow and heat transfer behaviors during the reflood phase of overheated fuel rods in light water nuclear reactors are well reproduced in the KHU facility. Thus, the verified reflood experimental facility can be used to explore the effects of other affecting parameters, such as CRUD, on the reflood heat transfer behaviors in practical nuclear reactors.

• Parasites, Hosts and Diseases
• /
• 제59권4호
• /
• pp.415-419
• /
• 2021

The circumsporozoite protein (CSP) of Plasmodium spp. is a diagnostic antigen and useful biomarker for monitoring short-term/seasonal changes to malaria transmission. Using P. vivax CSP antibody ELISA, epidemiological characteristics were analyzed in the residents of Ganghwa, Cheorwon, Paju, and Goseong from 2017 to 2018. In Ganghwa and Cheorwon, 1.6% and 1.2% of residents, respectively, were PvCSP-antibody-positive in 2018, which indicates a decrease of 0.4% in the positive rate compared to 2017. The annual parasite incidence (API) in Ganghwa and Cheorwon was 24.9 and 10.5 in 2017 and 20.3 and 10.7 in 2018, respectively. Although the changes were not significant, the API in Ganghwa decreased slightly by 4.5 in 2018 compared to the previous year. In Paju and Goseong, 3.9% and 2.0% of residents were positive for the PvCSP antibody. The API in Paju was 13.1 in 2017 and 16.0 in 2018, although no malaria patients were reported for the 2 years. Therefore, the results suggest that PvCSP is a useful antigen for confirming initial malaria infection. Additionally, considering that the antibody is relatively transient, it can be employed for sero-epidemiological studies to determine the extent of malaria transmission in the current year.

• Wind and Structures
• /
• 제34권5호
• /
• pp.407-419
• /
• 2022

Many factors should be considered by architects and designers for designing a tall building. Wind load is one of these important factors that govern the design of tall building structures and can become a serious challenge when buildings tend to be built very tall and slender. On the other hand, through the initial stages of a design process, choosing the design geometry greatly affects the wind-induced forces on a tall building. With this respect, geometric shapes with 3-fold rotational symmetry are one of the applied plan shapes in tall buildings. This study, therefore, aims to investigate the aerodynamic characteristics of 8 different geometrical shapes using Computational Fluid Dynamics (CFD) by measuring the drag and lift forces. A case study approach was conducted in which different building shape models have the same total gross area and the same height of 300 meters. The simulation was an incompressible transient flow that ran 1700 timesteps (85 seconds on the real-time scale). The results show a great difference between wind-induced force performance of buildings with different plan shapes. Generally, it is stated that the shapes with the same area, but with smaller perimeters, are better choices for reducing the drag force on buildings. Applying the lift force, the results show that the buildings with plan shapes that have rounded corners act better in crosswind flow while, those with sharp corners induce larger forces in the same direction. This study delivers more analytical understanding of building shapes and their behavior against the wind force through the parametric modelling.