• 한국해양학회지
• /
• v.26 no.2
• /
• pp.133-143
• /
• 1991

A new internal tide model for solving flow fields and wave generations is presented here which seems to be simple to apply, converges fast and yields accurate results. The new method employs a representation of vertical structure using dynamic basis functions which depend on the stratifications. The present method has been applied to the East Sea. For a constant Brunt-Vaisala case, weak baroclinic currents are generated over the entire continertal slop: however, results using a more realistic stratification can be described using only the lowest modes and exhibit much more realistic behavior. Baroclinic tide generation is confined to the upper slope. Model results for the East sea show the semi-diurnal baroclinic modes contain almost all the energy transferred from the barotropic mode.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.182-192
• /
• 2003

A new Monte Carlo (MC) simulator for electron beam lithography process in the multi-layer resists and compound semiconductor substrates has been developed in order to fabricate and develop the high-speed PHEMT devices for millimeter-wave frequencies. For the accurate and efficient calculation of the transferred and deposited energy distribution to the multi-component and multi-layer targets by electron beams, we newly modeled for the multi-layer resists and heterogeneous multi-layer substrates. By this model, the T-shaped gate fabrication process by electron beam lithography in the PHEMT device has been simulated and analyzed. The simulation results are shown along with the SEM observations in the T-gate formation process, which verifies the new model in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.165-170
• /
• 2001

In the continuos process systems, traction between a moving web and rollers is one of key mechanisms for the study of major issues including the distributed control of tension, guiding, wrinkling, winding, and scratching. Energy is transferred from the driven rollers to the web and from the web to the idle rollers through traction. The characteristics of friction play major role in the determination of the traction force between the moving web and the rollers. In this paper the characteristics of friction between the moving web and the rollers are studied. A procedure to determine the friction coefficient between the moving web and rollers is developed. An experimental setup to validate the procedure is devised. Experimental results showed that the value of traction coefficient decreases as the operating web speed increases and increases as the operation web tension increase.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.561-561
• /
• 2012

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as fast electron mobility, high thermal conductivity and optical transparency, and also found many applications such as field-effect transistors (FET), energy storage and conversion, optoelectronic device, electromechanical resonators and chemical sensors. Several techniques have been developed to form the graphene. Especially chemical vapor deposition (CVD) is a promising process for the large area graphene. For the electrically isolated devices, the graphene should be transfer to insulated substrate from Cu or Ni. However, transferred graphene has serious drawback due to remaining polymeric residue during transfer process which induces the poor device characteristics by impurity scattering and it interrupts the surface functionalization for the sensor application. In this study, we demonstrate the characteristics of solution-gated FET depending on the removal of polymeric residues. The solution-gated FET is operated by the modulation of the channel conductance by applying a gate potential from a reference electrode via the electrolyte, and it can be used as a chemical sensor. The removal process was achieved by several solvents during the transfer of CVD graphene from a copper foil to a substrate and additional annealing process with H2/Ar environments was carried out. We compare the properties of graphene by Raman spectroscopy, atomic force microscopy(AFM), and X-ray Photoelectron Spectroscopy (XPS) measurements. Effects of residual polymeric materials on the device performance of graphene FET will be discussed in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.393-393
• /
• 2011

We investigated the electronic structures of a poly sodium 4-styrensulfonate intercalated graphite oxide (PSSGO) electrode and a precursor graphite oxide (GO) electrode using X-ray absorption spectroscopy (XAS). Both electrodes were obtained from electrochemical cells. We found that in the C K-edge XAS spectra the ${\pi}^*$ state intensity originating from the sp2 hybridization of graphite decreases predominantly in the graphite oxide and PSSGO electrodes. This indicates that the negatively charged electrolyte ion (BF4-) is absorbed onto the electrodes and is transferred to the ${\pi}^*$ state of the both electrodes. The analysis of their F K-edge spectra reveals that more BF4- ions were found in the PSSGO electrode than in the graphite oxide electrode. This indicates that more electrolyte ions are absorbed in the PSSGO than in the graphite oxide electrode. We argue that this is the main reason why PSSGO cells have higher capacitance, higher energy density, and higher power density when compared to the graphite oxide cells. We also found that BF4- is the primary working ion that can be inserted into the interlayers of the PSSGO electrode.

• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.508-514
• /
• 2004

This study was conducted to investigate the influences of aeration rates and temperatures on phosphorus transformation in the manure during treatment of swine manure in 15.3L batch reactor. The total phosphorus of raw manure was composed of $91.5\%$ of inorganic phosphorus and $8.5\%$ of organic phosphorus. During the experiment, inorganic phosphorus decreased from $91.5\%\;(385.7\;mg/L)\;to\;25.8-42.7\%\;(108.8-179.8\;mg/L)$ while organic phosphorus increased from $8.5\%\;(35.6\;mg/L)\;to\;57.3-74.2\%\;(241.5-312.5\;mg/L)$. The organic phosphorus was increased by the possible transformation of soluble inorganic phosphorus to poly-phosphate by the microbial uptake. However, soluble inorganic phosphorus was not decreased much during the experiment because the insoluble inorganic phosphorus was transferred to soluble inorganic phosphorus offsetting the microbial uptake. There was no significant difference in soluble inorganic proportion variance during the experiment among treatments for three liquid temperatures and three aeration levels. In terms of phosphorus transformation in the manure and energy consumption required for aeration, lower aeration was desirable fur the manure treatment.

• International Journal of High-Rise Buildings
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2017

The Pertamina Energy Tower (PET) and Manhattan West North Tower (MWNT) are two supertall towers recently designed and engineered by Skidmore, Owings & Merrill (SOM). The structural system for both buildings consists of an interior reinforced concrete core and a perimeter moment frame system, which is primarily structural steel. As is typical for tall towers with both concrete and steel elements, staged construction analysis was performed in order to account for the long term effects of creep and shrinkage, which result in differential shortening between the interior concrete core and steel perimeter frame. The particular design of each tower represents two extremes of behavior; PET has a robust connection between the perimeter and core in the form of three sets of outriggers, while the perimeter columns of MWNT do not reach the ground, but are transferred to the core above the base. This paper will present a comparison of the techniques used during the analysis and construction stages of the design process with the goal of understanding the differences in structural behavior of these two building systems in response to the long term effects of creep and shrinkage. This paper will also discuss the design and construction techniques implemented in order to minimize the differential shortening between the interior and exterior over the lifespan of these towers.

• Structural Engineering and Mechanics
• /
• v.53 no.1
• /
• pp.73-87
• /
• 2015

In case of aircraft impact on nuclear containment structures, the initial kinetic energy of the aircraft is transferred and absorbed by the outer containment, may causing either complete or partial failure of containment structure. In the present study safety analysis of BWR Mark III type containment has been performed. The total height of containment is 67 m. It has a circular wall with monolithic dome of 21m diameter. Crash analysis has been performed for fighter jet Phantom F4. A normal hit at the crown of containment dome has been considered. Numerical simulations have been carried out using finite element code ABAQUS/Explicit. Concrete Damage Plasticity model have been incorporated to simulate the behaviour of concrete at high strain rate, while Johnson-Cook elasto-visco model of ductile metals have been used for steel reinforcement. Maximum deformation in the containment building has reported as 33.35 mm against crash of Phantom F4. Deformations in concrete and reinforcements have been localised to the impact region. Moreover, no significant global damage has been observed in structure. It may be concluded from the present study that at higher velocity of aircraft perforation of the structure may happen.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2850-2855
• /
• 2008

Very High Temperature Reactor (VHTR) has been selected as a high energy heat source for a nuclear hydrogen generation. The VHTR heat is transferred to a thermo-chemical hydrogen production process through an intermediate loop. Both Process Heat Exchanger and sulfuric acid evaporator provide the coupled components between the VHTR intermediate loop and hydrogen production module. A small scaled Compact Nuclear Hydrogen Coupled Components test loop is developed to simulate the VHTR intermediate loop and hydrogen production module. Main objective of the loop is to screening the candidates of NHDD (Nuclear Hydrogen Development and Demonstration) coupled components. The operating condition of the gas loop is a temperature up to $950^{\circ}C$ and a pressure up to 6.0MPa. The thermal and fluid dynamic design of the loop is dependent on the structures that enclose the gas flow, especially primary side that has fast gas velocity. We designed and constructed a small scale sulfuric acid experimental system which can simulate a part of the hydrogen production module also.

• Journal of Ginseng Research
• /
• v.20 no.3
• /
• pp.318-324
• /
• 1996

The effects of light on the growth and ginsenosides production were examined in the hairy roots of Panax ginsen C.A. Meyer induced by Agrobacterium rhizogines A4. The 9rowth of ginseng hairy roots in 1/2MS liquid medium was significantly decreased with an increment of light intensity (1,000~7,000 lux). The growth of hairy roots under 7,000 lux condition was decreased at 17% compared to the dark condition. The production of 7 ginsenosides in hairy root was very high in 3,500 lux condition. The production of ginsenoside-Rg, and Rf increased 3.3 and, 2.4 times respectively as compared to dark condition. The growth of hairy roots was inhibited by blue light, while ginsenosides production was increased. The sucrose demands of hairy roots was examined in light condition(3,500 lux). The growth of hairy roots in 1/2MS liquid medium with various sucrose concentrations(1~4%) was high in IVp sucrose, while ginsenosides production was high in 3% sucrose condition. The growth and ginsenosides production were high when hairy roots were cultured in dark condition for 1 week and then transferred to light condition(3,500 lux) for 4 weeks. It is suggested that ginsenosides production could be accelerated by light intensity of specific wavelength in cultures of ginseng hairy roots.