• Journal of Korea Technology Innovation Society
• /
• v.2 no.2
• /
• pp.233-248
• /
• 1999

For the last several decades, it has been recognized that technology is a key factor in becoming an ADC and an advanced firm. So many countries and individual firms have been increasing investments on technology development. Especially LDCs including Korea choose technology transfer and transaction as an important alternative of their own technology development. To activate technology transaction and transfer, it is necessary to establish an technology transaction system, namely a Technomart that will make good connections between technology suppliers and technology buyers, and efficient functional linkages of supporting infrastructures including organizations and laws related with technology transactions. Therefore this study reviewed both the characteristics of technology transfer and transaction and a conceptual structure of a Technomart through a literature review. And then, the study analyzed the Technomart related laws including an intellectual property right, a copyright, a patent right, and electric transaction related laws. In conclusion the study proposed the development directions of the Technomart related laws.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.185-190
• /
• 2005

This work presents a numerical procedure to optimize the elliptic-shaped pin fin arrays to enhance turbulent heat transfer. The response surface method is used as an optimization technique with Reynolds-averaged Navier Stokes analysis of flow and heat transfer. Shear stress transport (SST) turbulence model is used as a turbulence closure. Computational results for average heat transfer rate show a reasonable agreement with the experimental data. Four variables including major axis length, minor axis length, pitch and the pin fin length nondimensionalized by duct height are chosen as design variables. The objective function is defined as a linear combination of heat transfer and friction-loss related terms with weighting factor. D-optimal design is used to reduce the data points, and, with only 28 points, reliable response surface is obtained. Optimum shapes of the pin-fin arrays have been obtained in the range from 0.0 to 0.1 of weighting factor.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.16-25
• /
• 1997

A new method to model the HRTF's(Head-Related Transfer Function), which could give improvement of the sound localization accuracy using the spatial effects by the reflected sound wave transfer characteristics, is proposed. When using the HRTF model having reflected sound wave transfer characteristics, the accuracy of sound localization was quite improved up to about 23%, compared with using the direct wave transfer characteristics only. Furthermore, it is verified that the spatial impression could be a factor to enhance the ability of sound localization.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.159-162
• /
• 2007

This study presents a numerical procedure to optimize the shape of a staggered dimpled surface to enhance the turbulent heat transfer in a rectangular channel. A optimization technique based on neural network is used with Reynolds-averaged Navier-Stakes analysis of the fluid flow and heat transfer with Shear Stress Transport turbulence model. The dimple depth-to-dimple print diameter ratio, channel height-to-dimple print diameter ratio, and dimple print diameter-to-pitch ratio are chosen as design variables. The objective function is defined as a linear combination of terms related to heat transfer and friction loss with a weighting factor. Latin Hypercube Sampling is used to determine the training points as a mean of the Design of Experiment. Optimal values of the design variables were obtained in a range of the weighting factor.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2003.10a
• /
• pp.99-99
• /
• 2003

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2003.10a
• /
• pp.114-114
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.700-706
• /
• 2006

This study presents a numerical procedure to optimize the shape of dimple surface to enhance turbulent heat transfer in a rectangular channel. The response surface based optimization method is used as an optimization technique with Reynolds-averaged Wavier-Stokes analysis of fluid flow and heat transfer with shear stress transport (SST) turbulence model. The dimple depth-to-dimple print diameter ratio, channel height-to-dimple print diameter ratio, and dimple print diameter-to-pitch ratio are chosen as design variables. The objective function is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. full factorial method is used to determine the training points as a mean of design of experiment. The optimum shape shows remarkable performance in comparison with a reference shape.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.835-847
• /
• 2017

A transmitting coil with an optimal topology and number of turns can effectively improve the performance of the wireless power transfer (WPT) systems for endoscope robots. This study proposes the evaluation parameters of the transmitting coils related to the performance of the WPT system to standardize the design of the transmitting coils. It considers both the quality factor of transmitting coils and the coupling factor between the two sides. Furthermore, an analytical model of transmitting coils with different topologies is built to exactly estimate the evaluation parameters. Several coils with the specified topologies are wound to verify the analytical model and the feasibility of evaluation parameters. In the case of a constant power received, the related evaluation parameters are proportional to the transfer efficiency of the WPT system. Therefore, the applicable frequency ranges of transmitting coils with different topologies are determined theoretically. Then a transmitting coil with a diameter of 69 cm is re-optimized both theoretically and experimentally. The transfer efficiency of the WPT system is increased from 3.58% to 7.37% with the maximum magnetic field intensity permitted by human tissue. Finally, the standardized design of the transmitting coil is achieved by summing-up and facilitating the optimization of the coils in various situations.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.3 s.42
• /
• pp.39-46
• /
• 2007

This study presents a numerical procedure to optimize the shape of staggered dimple surface to enhance turbulent heat transfer in a rectangular channel. The RBNN method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport (SST) turbulence model. The dimple depth-to-dimple print diameter (d/D), channel height-to-dimple print diameter ratio (H/D), and dimple print diameter-to-pitch ratio (D/S) are chosen as design variables. The objective function is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. Latin Hypercube Sampling (LHS) is used to determine the training points as a mean of the design of experiment. The optimum shape shows remarkable performance in comparison with a reference shape.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.3
• /
• pp.233-242
• /
• 2016

This study aimed to analyze educational satisfaction and the relationship between learning transfer and learning persistence shown after actual education targeting students who participated in the agricultural education and training. Conclusions based on the study results can be suggested as follows. First, of the factors related to learning persistence, satisfaction of educational contents turned out to be a statistically significant factor with a positive effect in the agricultural education and training. Students participating in the agricultural education and training have a conspicuous object to learn for improving ability which is necessary for and applicable to agriculture. Second, of the three factors related to learning transfer in the agricultural education and training, satisfaction of educational contents, educational facilities and satisfaction of environment turned out to have a positive effect. Third, results show that satisfaction of instructors does not affect both learning persistence and learning transfer. Lastly, in case of education and training for field practice, this study is suggesting the necessity of research by accessing in a concrete and detailed manner such as learning contents, instructors, educational facilities and satisfaction of environment from the comprehensive concept of educational satisfaction in the directivity of study related to satisfaction.