• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2016

Public transportation is public service that is contributed to the convenience of the public. However, opportunity for public services in rural areas is weaker than the chance in urban areas. The purpose of this study is to evaluate accessibility of various public facilities using public transportation. To evaluate the accessibility, we calculate the various time from community center to the nearest bus stop, walking time, riding time in bus, and waiting time for transfer. The results of this study ares as follows; (1) Villages occupy 19.8% in rural areas that walking time from community center to the nearest bus stop takes over 10 minutes in integrated Chungju-si; (2) The average speed is 21.9 km/hr estimated to departure and arrival time of bus route; (3) The accessibility time from community center using the average bus speed takes 15.43 minutes to public facilities, 35.15 minutes to emergency center, 8.70 minutes to medical center, 9.70 minutes to elementary school, 16.26 minutes to middle school, and 22.61 minutes high school; (4) The transfer time of public transportation takes 13.46, 21.96, 10.48, 7.78, 11.11, 16.10 minutes to public facilities, emergency center, medical center, elementary school, middle school, and high school, respectively; (4) Traffic accessibility using bus vehicles in the East and South Chungju-si is lower than areas in the West and North Chungju-si. Some villages surrounding public offices (eup-myeon office) which have a high density of population, indicate a high traffic accessibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.598-612
• /
• 2004

Client requests have increased with the improvement of network resources at client side, whereas network resources at server side could not keep pace with the increased client request. Therefore, it is primary factor of the Qos that efficiently utilize network resources at server side. In this paper, we proposed a new model that peer-to-peer transfer scheme for partial multimedia stream based on CIWP which it decrease server network bandwidth by utilizing client disk resources saves additional server network resources. Especially, adapting Threshold_Based Multicast scheme guarantees to do that data transfer within clients never exceed service time of previous peer by restriction of which data size transferring from previous peer less than data size transferring from server. Peer-to-peer transfer within clients is limited in same group classified as ISPs. Our analytical result shows that proposed scheme reduces appling network resources at server side as utilizing additional client disk resource. furthermore, we perform various simulation study demonstrating the performance gain through comparing delay time and proportion of waiting requesters. As a result, when we compared to Threshold_Based Multicast scheme, the proposed scheme reduces server network bandwidth by 35%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.5 s.236
• /
• pp.633-642
• /
• 2005

Nucleate pool boiling experiments for R11 under a constant wall temperature condition were carried out. A microscale heater array was used for the heating and the measurement of high temporal and spatial resolution by the Wheatstone bridge circuit. Very sensitive heat flow rate data were obtained by the control for the surface condition with high time resolution. The measured heat flow rate shows a discernable peak at the initial growth stage and reaches an almost constant value. In the thermal growth region, bubble shows a growth proportional to $t^{\frac{1}{5}}$. The bubble growth behavior is analyzed with a dimensionless parameter to compare with the previous results in the same scale. As the wall superheat increases, the departure diameter and the departure time increase, and the waiting time decreases. But the asymptotic growth rate is not affected by the wall superheat change. The effect of the wall superheat is resolved into the suggested growth equation. Dimensionless parameters of time and bubble radius characterize the thermal growth behavior well, irrespective of wall condition. The comparison between the result of this study and the previous results shows a good agreement at the thermal growth region. The quantitative analysis for the heat transfer mechanism is conducted with the measured heat flow rate behavior and the bubble growth behavior. The required heat flow rate for the volume change of the observed bubble is about twice as much as the instantaneous heat flow rate supplied from the wall.

• Korean Journal of Digital Imaging in Medicine
• /
• v.8 no.1
• /
• pp.21-26
• /
• 2006

Hospitals these days are trying to introduce the a practice has recently been generalized in the test or diagnosis process, where test results and images from different test labs are interlinked together. This process is identical to that of physical aspect in EMR process, which computerizes the paper results within the hospital. One of the prerequisites for the process of computerizing test results is the interface between clinical test devices in the test labs. However, due to the variety of prescription inputs, disparity of test result papers, complexity of job in test labs and diversify of interfaces among the different devices, interconnection with the hospital information system is a complicated job. A universal control of clinical test devices which have independent communication protocols has become possible by connecting them with an interface workstation. As for the patients, waiting time for test has been reduced, and, thanks to the synchronized result retrieval system, it has become possible to check the test results on the very day of the test. As a result, the length of hospitalization has been reduced, too. In terms of workflow, as the transfer of charts and transfer of result papers are separated, the embarrassing job of collecting result papers has disappeared. As patients' test appointment and the results processing can be made on-line, extra work for doctors have disappeared. And, thanks to the computerization of test results information management, the job of statistical processing has become convenient.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.170-181
• /
• 2015

This study explores passengers' travel characteristics at six bus stops on the Seoul Ring Expressway using smart traffic card data. Based on the characteristics, political strategies to improve bus facilities on expressway are suggested. Firstly, among them two bus stops of Guri and Uiwang-Cheonggye have higher transfer rate of passengers, 37.56% and 36.9% of the total intercity (red) bus passengers on the expressway, respectively. Secondly, Uiwang-Cheonggye bus stop has the highest transfer rate, and Guri bus stop has also higher transfer rate and the highest on-and-off passengers. It implies that both bus stops need to be prioritized for improving bus stop facility, access roads, and connection facility between the bi-directional stops. Thirdly, Guri (down) bus stop has relatively longer waiting time for transfer, thus shorter bus headways running the bus stop should be considered. Lastly, most passengers using both stops come to and from Bundang-gu in Geongnam City. Overall, the results of this study would be helpful for transport planners to develop effective bus route policies and bus operation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2016

As the need of eco-friendly transportation systems for sustainable development increases, public transport accessibility has been considered as an important element of transportation system design. When analyzing the accessibility, shortest path algorithms can be utilized to reflect the actual movement and we can obtain high resolution accessibility for all other stations on the network with shortest distance and time. This study used the algorithm improved by reflecting the penalty of number of transfers and waiting time of overlapped routes to get the accessibility. KTX Seoul Station is a target place and this algorithm is applied to multi-layer subway bus network of Seoul to calculate the accessibility, therefore this study presented the accessibility of KTX Seoul station by stations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2819-2827
• /
• 2013

The purpose of his study was to analyze the environmental and the medical factors of prematurely discharged patients in a rehabilitation hospital. The subjects were 107 inpatients. The data were collected using self-report questionnaire and analyzed using the SPSS Win 19.0 program. In result, Firstly, general selection of hospitals was the 'Recommendation' 35.5%, Environmental dissatisfaction factors are Hospital facilities 37.4%. Hospital choice is the highest 'Acquaintances' 23.4%. Second, the lowest group about professionalism, kindness, and description of explanation on satisfaction in survey is group of care workers for the sick. The highest group is physical and occupational therapist. Third, the satisfaction regarding medical procedures of administrative work, waiting time and medical expenses is the highest normal. Hospital facilities in one of the highest factors in environmental dissatisfaction is can be considered as an element of patient departure because of not much number of nervous special hospitals. Medical dissatisfaction factors is the lowest satisfaction of care worker even if those spend much time. this is the focus leaving hospital. Therefore, factors care workers on service satisfaction and dissatisfaction in analysis and problem solving is considered that the need to find ways to improve the quality of service care workers.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.730-734
• /
• 2009

The ottonello method is used to see a front view image of cervical 1-7 number. The study found a systematic examination method to find a better image through an experiment using metronome. The results are as follows: In an evaluation of MTF, when used 0.5 standard of MTF, oral explanation resulted 1.2 LP/mm, Moderato-100 1.4 LP/mm, Allegro-138 1.6 LP/mm, Presto-184 2.4 LP/mm. Among them presto-184 showed the highest sharpness with 2.4 LP/mm. In an image reading by a medicine doctor of radiology, when oral explanation was 17%, Moderato-100 15%, Allegro-138 18%, Presto-184 50%. Among themprest-184 was evaluated as the best image. The result of was a method to reduce an image repeat, patients radiation exposure, patients waiting time for examination, material and so on.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.336-341
• /
• 2007

Purpose: The most accepted method for the reanimation of a paralyzed face is the two-stage method that combines cross-face nerve grafting with free-muscle transfer. Although the results of reconstruction with this method are satisfactory, there is an excessive delay between the stages, which prolongs the period of rehabilitation. In order to overcome this drawback, a one- stage, neurovascular free-flap reconstruction method using free neurovascular muscle flaps is introduced. Methods: From 1994 to 2004, 35 patients with longstanding facial palsy were treated. Fifteen patients underwent the single-stage reconstruction with the latissimus dorsi muscle, and 20 patients underwent the two-stage reconstruction method with the gracilis muscle. We compared the long-term results of the two methods of reconstruction. The mean follow-up period was 28.7 months for one-stage reconstruction, and 35.2 months for the two-stage, respectively. Results: In the patient group of the single stage reconstruction, both mouth corner excursion and animation grade were markedly improved at the final postoperative visit. Moreover, the first muscle contraction occurred earlier in this group, than in the two-stage reconstruction group. However, four patients in the single stage group never achieved a first muscle contraction or mouth corner excursion. Conclusion: Facial palsy is a very challenging condition for cosmetic surgeons to deal with. Traditional methods for treatment of chronic facial palsy use a two-stage muscle flap which is time-consuming and burdensome to patients, many of whom are averse to waiting 8 to 12 months to complete the two stages. The one-stage reconstruction method described herein uses a latissimus dorsi free-flap and has demonstrated consistent positive outcomes in clinical assessments.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.29-39
• /
• 2008

Recently, an ALV (Automated Lifting Vehicle) is studied as an efficient transporter, which can reduce the waiting time during ship operation in a container terminal. There are little of studies on an ALV system considering dynamic factors after analysing the cooperation between equipments. The performance of an ALV depends on self-loading & unloading of an ALV, vehicle’s interference, and occupancy of an available transfer point under dynamic environment. So, it is very difficult to evaluate the productivity of a container terminal with an ALV system. Therefore the simulation model with operational rules that be apt for an ALV system must be developed. Also the model has to consider the characteristics of interface operations and vehicle traffic. Supposing an container terminal with perpendicular layout, this study analyses the process of container handling operation and proposes operational rules such as the ALV dispatching, routing algorithm and so on for a model. We developed a simulation model for a container terminal with an ALV system using object-oriented simulation software, Anylogic.