• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1375-1387
• /
• 2004

A solution is given for the elastodynamic problem of a crack perpendicular to the graded interfacial zone in bonded materials under the action of anti plane shear impact. The interfacial zone is modeled as a nonhomogeneous interlayer with the power-law variations of its shear modulus and mass density between the two dissimilar, homogeneous half-planes. Laplace and Fourier integral transforms are employed to reduce the transient problem to the solution of a Cauchy-type singular integral equation in the Laplace transform domain. Via the numerical inversion of the Laplace transforms, the values of the dynamic stress intensity factors are obtained as a function of time. As a result, the influences of material and geometric parameters of the bonded media on the overshoot characteristics of the dynamic stress intensities are discussed. A comparison is also made with the corresponding elastostatic solutions, addressing the inertia effect on the dynamic load transfer to the crack tips for various combinations of the physical properties.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1903-1910
• /
• 2000

본 논문은 TCP/IP상에서 전자서병고 공개키 분배 및 인증 등의 기능이 포함된 메시지전송 프로토콜로 구현된 프로그램의 검증문제를 퍼지적분을 이용하여 해결하였다. 기능별로 보안기술, 보안정책, 전자문서처리, 전자문서전송, 임.복호화키로 나누어 분류하여 구현된 내용을 기능별점수와 전문가의 요구사항을 구현된 크로토콜에서 산출 값과 비교하여메시지 보안프로토콜을 기능별로 점수화하여 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.238-243
• /
• 1986

Distillation columns are widely used in almost every chemical plant. The use of multivariable control for such units is attractive because of the strong interactions exhibited between outputs and inputs and the desire to control simultaneously both top and bottom products. In this research design of a robust multivariable controller for distillation column was considered; output feedback controller with proportional and integral modes was designed using pole assignment. The transfer function matrix was obtained by fitting the step response realtions between single input double output pairs of variables. This matrix was then converted to linear time invariant state space model by multivariable realization technique. With the proposed multivariable proportional and integral controller applied to the process, the result of the digital computer simulation showed a good performance of asymtotic tracking. The limited experimental performance of this multivariable control was compared with the result from simulation. It was found that the proposed controller performed satisfactorily for the distillation column which separated binary mixture of methanol and water.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.48-58
• /
• 1983

The transient sound radiation from the impact between a steel ball and a thick plate is analyzed theoretically and compared with experiment results. The derivation process itself is difficult to analyze sound radiation characteristics theoretically for a thick plate with some resonances but may be investigated from measured data. During mechanical impacts, arbitrary driving point importance for an elastic system enables to predict by using mechanical importance method. In order to obtain approximate solution for an impact model testing, the surface Helmholtz integral formulation based on the integral expression for pressure in the field in terms of surface pressure and normal velocity is used as a basis. A simple expression is developed for an impulsive response function, which is time dependent velocity potential and pressure for an impact may then be computed by a convolution of exciting force. In estimating of elastic-acoustical correlation problems, mechanical inertance, overall transfer function and radiation resistance obtained by signal processing techniques are used. The usefulness is confirmed by applying these methods prediction of arbitray driving pint inertance, radiated sound pressure and exciting force.

• 한국게임학회지
• /
• 제2권1호
• /
• pp.23-30
• /
• 2002

사용자 기반이 활성화 되고있는 모바일에서 게임을 지속적으로 유지하기 위해 전자서명과 공개키 분배 및 인증 등의 기능이 포함된 메시지전송 프로토콜로 구현된 프로그램의 검증문제를 Choquet 퍼지 적분을 이용하여 해결하고 이를 퍼지 적분과 비교 분석하였다. 기능별로 보안기술, 보안정책, 전자문서처리, 전자문서전송, 암 복호화키로 나누어 분류하여 구현된 내용을 기능별점수와 전문가의 요구사항을 구현된 프로토콜에서 산출 값과 비교하여 메시지 보안프로토콜을 기능별로 점수화하여 검증하였다.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2000년도 추계학술대회 E-Business와 정보보안
• /
• pp.343-349
• /
• 2000

본 논문은 TCP/IP 상에서 전자서명과 공개키 분배 및 인증 등의 기능이 포함된 메시지전송 프로토콜로 구현된 프로그램의 검증문제를 Choquet 퍼지적분을 이용하여 해결하고 이를 퍼지적분과 비교분석하였다. 기능별로 보안기술, 보안정책, 전자문서처리, 전자문서전송, 암ㆍ복호화키로 나누어 분류하여 구현된 내용을 기능별점수와 전문가의 요구사항을 구현된 프로토콜에서 산출 값과 비교하여 메시지 보안프로토콜을 기능별로 점수화하여 검증하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (상)
• /
• pp.445-448
• /
• 2001

본 논문은 TCP/IP 상에서 보안 개념을 지속적으로 유지하기 위해 전자서명과 공개키 분배 및 인증 등의 기능이 포함된 메시지전송 프로토콜로 구현된 프로그램의 검증문제를 Choquet 퍼지적분을 이용하여 해결하고 이를 퍼지적분과 비교분석하였다. 기능별로 보안기술, 보안정책, 전자문서처리, 전자문서전송, 암 복호화키로 나누어 분류하여 구현된 내용을 기능별점수와 전문가의 요구사항을 구현된 프로토콜에서 산출 값과 비교하여 메시지 보안프로토콜을 기능별로 점수화하여 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.529-534
• /
• 2012

The fluorescence of 4',6-diamidino-2-phenylindole (DAPI) bound to DNA at a [DAPI]/[DNA base] ratio of 0.005 was quenched by meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP) or cis-bis(N-methylpyridinium-4-yl)porphyrin (BMPyP) when both DAPI and either porphyrin spontaneously bound to the same DNA strand. The quenching was investigated using the "one-dimensional inner sphere" and the "F$\ddot{o}$rster resonance energy transfer" (FRET) models. Total quenching occurred when DAPI and TMPyP were up to 19.3 base pairs or $66\AA$ apart. BMPyP could quench the fluorescence up to 13.9 base pairs or $47\AA$. TMPyP, which intercalated between the DNA base-pairs, appeared to be a better acceptor than BMPyP, which stacked along the DNA stem. The higher quenching and higher resonance energy transfer efficiency of TMPyP was due to the larger overlap integral between its absorption spectrum and the emission spectrum of DNA-bound DAPI.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.144-152
• /
• 1997

Film absorption involves simultaneous heat and mass transfer in the vapor-liquid system. In the present work, the absorption process of water vapor by an aqueous soluton of LiBr flowing inside of the vertical tube was investigated. The continuity, momentum, energy and diffusion equations for the solution film and vapor were formulated in integral forms and solved numerically. The model could predict the film thickness, the pressure gradient, and the heat and mass transfer rate. Particularly the effects of vapor flow conditions on the absorption process were investigated in terms of the vapor Reynolds number. As the vapor Reynolds number increased, the shear stress at the vapor-solution interface also increased. Consequently solution film became thinner at higher vapor flowrate under the co-currentflow condition. Thinner film was capable of higher heat transfer to the wall and leaded to higher absorption rate of the water vapor into the solution film.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.499-509
• /
• 1998

In the absorption process of water vapor in a liquid film, the composition of the gas phase, in which a non-absorbable gas is combined with the absorbate influences the transport characteristics remarkably. In the present study, the absorption processes of water vapor into aqueous solution of lithium bromide in the presence of non-absorbable gases were investigated analytically. The continuity, momentum, energy and diffusion equations for the solution film and gas phase were formulated in integral forms and solved numerically. It was found that the mass transfer resistance in gas phase increased with the concentration of non-absorbable gas. However the primary resistance to mass transfer was in the liquid phase. As the concentration of non-absorbable gas in the absorbate increased, the liquid-vapor interfacial temperature and concentration of absorbate in solution decreased, which resulted in the reduction of absorption rate. The reduction of mass transfer rate was found to be significant for the addition of a small amount of non-absorbable gas to the pure vapor, especially at the outlet of an absorber where non-absorbable gases accumulated. At higher non-absorbable gas concentration, the decrease of absorption flux was almost linear to the volumetric concentration of non-absorbable gas.