• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.516-521
• /
• 2001

Present study deals with combustion characteristics and performance of U type radiation tube burner with fin which combustion capacity is 30,000kcal/hr and the maximum capacity of supply fuel is $30Nm^{3}/hr$. Temperature difference of radiation tube is about $173^{\circ}C$ at 25% capacity and this show relatively small temperature difference for convenient type. Thermal efficiency is satisfactory as $72{\sim}81%$. Also, radiative efficiency of radiation tube is $52{\sim}73%$. The efficiency of heat exchanger is $27{\sim}37%$. Therefore, radiative efficiency is improved to $1{\sim}10%$ after installing fin.

• 한국정보기술학회 영문논문지
• /
• 제10권1호
• /
• pp.57-69
• /
• 2020

In general, many IoT devices, including smart phones, use LTE, Wi-Fi, and Bluetooth, and these communication modules generate a lot of energy consumption during periodic data transmission. This paper proposes a method of the data transmission mode change for improving energy efficiency in various communication environments that mobile devices may encounter. We propose an algorithm for setting the mode considering energy efficiency, data transmission performance and cost when the mobile device transmits data, and transmitting the data in an optimized manner according to the state of the mobile device. The proposed algorithm is implemented through experiments on energy efficiency for each communication module, and the scenario is used to verify how efficiently the proposed algorithm uses energy.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1294-1303
• /
• 1993

본 논문은 Lee의 평행평판 채널내의 난류유동 모델을 사용하여 비대칭적 경계 를 갖는 이중관내 거칠기 표면위에서의 흐름을 취급하였다. 해석에서 표면거칠기는 속도 형상에 단지 국부적으로 영향을 미친다고 가정하여 한쪽 면에서만 사각형 거칠기 요소를 가진 평행관 사이의 유동에 관해 이미 얻은 실험 관계식을 이용하였다. 거칠 기의 합성효과는 압력손실 증가에 대한 열전달 증가에 대해 거친관과 매끈한 관의 경우를 비교한 값에 의하여 알수 있었다.그러므로, 전체적 효율측면에서 유리하게 열전달률을 증가시킬수 있는 이중관내의 바람직한 인공의 거칠기형태(P/.epsilon., S/.epsilon.,.alpha., etc.)를 얻을 수 있었다.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.779-787
• /
• 2002

The cooling heat transfer by impinging water spray jets on a rotating roll with a relatively large diameter has been investigated under various experimental conditions with 3 different sizes of flat type nozzle. The local heat transfer coefficients were calculated by finite difference method using measured surface temperatures of the circular cylinder as boundary conditions. Results show that a peak value of the heat transfer coefficient is located at the center of sprayed area and there may be a secondary peak at the downstream. The average heat transfer coefficients on the sprayed area were found to be 10 to 22 ㎾/$m^2$$^{\circ}C$, and were not related to spraying pressure, but approximately linearly to flow rate of sprayed water. Also it is found that increasing the distance from roll to nozzle could improve the cooling efficiency by increasing the sprayed area.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1154-1164
• /
• 2018

In single-phase magnetically coupled resonant (MCR) wireless power transfer (WPT) systems, the transfer characteristics, including the output power and transfer efficiency, are significantly influenced by the spatial scales of its coils. As a potential alternative, a three-phase MCR WPT system with cylinder-shaped coils that are excited in a voltage-fed manner has been proposed to satisfy the requirements of compact space. This system adopts a phase-shifted angle control scheme to generate a rotating magnetic field and to realize omnidirectional WPT that is immune to spatial scales. The magnetic field model and equivalent circuit models are built to holistically analyze the system characteristics under different angular misalignments. Research results show that the transfer characteristics can be improved by modulating the phase-shifted angle in each phase. Experiments have also been carried out to evaluate the accuracy of the theoretical analysis and to confirm the validity of the system modeling method.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.165-171
• /
• 2002

The thermosyphon has been used as a heat transmission device in the heat recovery of low level energy and cooling for heat generating equipments. Many studies on the working fluids and wicks have been reported to improve the heat transfer efficiency of the thermosyphon. A low temperature heat pipe with acetone is chosen in the present study to compare the heat transfer characteristics due to pouring amount of working fluid, magnitude of power supplied and tilt angles. The thermosyphon made ⵁ$15.88{\times}0.8t{\times}600mm$ of copper, evaporation section 200mm, insulation section 25mm, condensation 375mm. Heat transfer rate of the thermosyphon increase as magnitude of power supplied increase and observe dry out phenomenon at 5~10% of pouring amount of working fluid. So thermosyphon at the 150kJ/s judged to need 12% or more. Heat transfer rate of the thermosyphon have nothing to do with tilt angles. Dry out phenomenon of the thermo syphon makes it possible that a low temperature thermosyphon may be used to control temperature and heat transfer of a system when the critical quantity of a working fluid is supplied in the thermosyphon.

• Reproductive and Developmental Biology
• /
• 제31권4호
• /
• pp.235-240
• /
• 2007

This study was conducted to examine the viability of Korean native striped cattle (Bos namadicus Falconer, Chikso) clone embryos after embryo transfer. Chikso somatic cell nuclear transfer (SCNT) embryos were produced by fusion of ear skin cells derived from a female Chikso with enucleated oocytes matured in vitro for 18-24 hr. After in vitro culture of SCNT embryos for 7 to 8 days, fresh or vitrified blastocysts derived from SCNT were transferred into a uterine horn of recipient cows. Fifteen of total 43 recipients were pregnant at Day 50 and 4 recipients were maintained to term. Three IVF-derived calves and 1 clone Chikso calf were born. Pregnancy rate was higher when fresh embryos were transferred to recipients compared to vitrified embryos, but development to term was not different between both groups. The clone Chikso calf died at 5 days after birth due to the fullness of amniotic fluid in rumen and the infection of umbilical cord. The result of the present study shows that clone Chikso calf can produced from the embryo transfer of SCNT embryos, however, solution of abortion problem is necessary to improve the cloning efficiency.

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.65-72
• /
• 2002

Recently, stem cell-mediated gene therapy is emerging as a novel therapeutic approach. For the successful gene modification of stem cells, the development of a suitable gene transfer technique needs to be preceded. This review focuses on the various gene transfer techniques based on nonviral and viral vectors, and physical methods. The advantages and disadvantages of each gene transfer method are compared, and the general properties of these vectors are discussed in relation to the gene transfer in stem cell research. This review also highlights the therapeutic application of stem cell-mediated gene therapy. The choice of gene transfer vectors may vary depending on the type of the stem cells and the target of stem cell therapy. Of various gene transfer methods, viral vector-based gene therapy has been emphasized due to the higher transfection efficiency. The current status and up-to-date findings of stem cell-mediated gene therapy are discussed in the viewpoint of the various targets of stem cell therapy such as the modification of stem cell potency, the acceleration of regeneration process and the formation of expressional organization.

• 설비공학논문집
• /
• 제24권8호
• /
• pp.636-645
• /
• 2012

The performance of various type plate exchangers with different chevron angle, dimple size and arrangement was analysed by using Ansys v13.0. Heat transfer performance, pressure drop and flow patten of plate heat exchanger were investigated according to mass flow ratio investigated and compared. As a result, the $60^{\circ}$-chevron type plate heat exchanger showed the highest heat transfer performance but pressure drop was relatively high. The efficiency of $45^{\circ}$-chevron type plate heat exchanger showed the best performance in considering of heat transfer performance and pressure drop simultaneously. Among dimple type plate heat exchangers, the highest heat transfer performance was shown in a dim_zigzag type plate heat exchanger but pressure drop was very high. Besides, the dim_upsize plate heat exchanger showed very low pressure drop.

• 한국태양에너지학회 논문집
• /
• 제23권1호
• /
• pp.9-16
• /
• 2003

For the study of an effect that fin thickness and shape of heat exchanger have on the elevation of heat transfer efficiency, we make models of plate fin type heat exchanger and louvered fin type heat exchanger which was given a transformation of fin thickness in plate f)n type heat exchanger and louvered fin type heat exchanger which are often used now. And the effect of fin thickness on pressure drop and characteristics of heat transfer was experimented and analysed when air velocity and temperature of plate heating was a variable. The results of experiment shows below. Pressure drop shows larger in louvered fin type exchanger than in plate fin type exchanger, size of pressure drop shows like this order that fin thickness is 0.3mm, 0.2mm, 0.1mm. Mean heat transfer coefficient shows higher in louvered fin type exchanger than in plate fin type exchanger, size of mean heat transfer coefficient by fin thickness shows same in both case in louvered fin type heat exchanger and plate fin type exchanger like this order that fin thickness is 0.1mm, 0.2mm, 0.3mm.