• 대한교통학회지
• /
• 제13권4호
• /
• pp.105-115
• /
• 1995

This paper deals with an operation concept of "time-transfer of buses", in which buses arrive a transfer center at the same time and allow passengers to transfer to other bus lines, so that passengerscan go anywhere all the timed-transfere buses operate with only one transfer. This timed-transfer bus system is known as an efficient operating technique which can be adopted in an area with sparsely distrubuted bus demand. A model of timed-transfer is estabilished in terms of vaious factors such as the expected(or average) arrival time, distribution of arrival time, timed-transfer cycle, shceduled departure time, etc. It is assumed that the objective of timed-transfer bus system is to minimize the total transfer waiting time. The optimal schedualed arrival time or buffer time(time required to arrive ealy in consideration of delay) is analyzed for a general case and various speicial cases. It was found that the optiaml buffer time is an inverse funcion of the timed-transfer cycl and increases with the cycle time, assumin g that there is a fixed scheduled departure time at the transfer cetner regardless of whether one or more buses fail to arrive before the scheduled departure time. If buses are to wait uhtil all the buses arrive at the transfer center, that is, the transfer departure time is vairable, the optimal scheduled arrival times can be obtained by a mathmatical programming.

• 대한교통학회지
• /
• 제26권4호
• /
• pp.217-227
• /
• 2008

이용자가 수용 가능한 환승시간 및 환승거리의 결정은 환승시스템을 계획하는 단계에서 가장 우선적으로 고려되어야 한다. 환승 자체가 불가능한 경우, 환승시스템 구성요소의 개선은 환승을 선택하는데 있어서 전혀 영향을 주지 못한다. 한계환승도보거리는 이용자의 처음교통수단에서 다음 교통수단까지의 합리적인 도보거리와 대기시간으로 결정되어져야한다. 대중교통 네트워크나 환승시스템 계획단계에서 환승서비스 권역을 좀 더 현실적으로 결정하기 위해서는 이용자 속성이 고려되어야 한다. 따라서 본 연구에서는 환승에 초점을 맞추어 이루어 졌으며, 대중교통 이용자 인적속성에 따라 수용하는 환승거리와 시간이 다를 것이라는 가정을 한 후 대중교통 이용자 인적속성에 따라 환승시간별 환승률 산정 모형을 개발을 하는것을 목적으로 하였다. 이 중 한계환승시간과 상관관계가 높고, 환승시간에 따른 명확한 차이가 있는 성별, 월평균 수입별, 대중교통 환승횟수로 한정하여 환승시간별 환승률, 환승거리별 환승률의 결정모형을 개발하였다.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.52-58
• /
• 1998

The effect of Si content in welding wires on th arc stability was investigate, in the region of short circuit transfer and spray transfer. In the region of short circuit transfer, with increasing Si content, average arcing time and average short circuit time were increased. Therefore, droplet transfer frequency was decreased, due to the increase of arcing time and peak current at the moment of arc-reiginition was increased, due to the increase of short circuit time. In the region of spray transfer, the fluctuations of arc current and arc voltage was the most stable in wire with Si content of about 00.60 wt.%.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.55-61
• /
• 1999

The effect of S content in welding wires on the arc stability was investigated, in the region of short circuit transfer and spray transfer. In the region of short circuit transfer, with increasing S content, average arcing time and average short circuit time were decreased. Therefore, droplet transfer frequency was increased, due to the reduction of arcing time and peak current at the moment of arc-reiginition was decreased, due to the decrease of short circuit time. In the region of spray transfer, the fluctuation degree of arc current and arc voltage became more stable, with increasing S content.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.238-243
• /
• 1999

Minimum-fuel and -time orbit transfer are two major goals of the satellite trajectory optimization. In this paper, we consider satellites in two coplanar elliptic orbits when the apsidal lines coincide, and analytically find the conditions for the two-impulse minimum-time transfer orbit using Lambert's theorem. The transfer time is a decreasing function of a variable related to the transfer orbit's semimajor axis in the minimum-time case. In the minimum-time case, there is no unique minimum-time solution, but there is a limiting solution. However, there exists a unique solution in the case of minimum-fuel transfer, fur which we find analytically the necessary and sufficient conditions. As a special case, we consider when the transfer angle is one hundred and eighty degrees. In this case, we show that we obtain the classical fuel-optimal Hohmann transfer orbit. We also derive the Hohmann transfer rime and delta-velocity equations from more general equations, which are obtained using Lambert's theorem. We note the tradeoff between minimum-time and - fuel transfer. An optimal coplanar orbit maneuver algorithm to trade off the minimum-time goal against the minimum-fuel goal is proposed. Finally, the numerical simulation results are given to demonstrate the derived theory and the algorithm.

• 한국임상보건과학회지
• /
• 제7권1호
• /
• pp.1215-1223
• /
• 2019

Purpose: This study is to figure out not only the characteristics relating to transfer time of inter-hospital transfer patient which is transferred by a private ambulance, but also factors influencing the transfer time. Methods: In this study, an analysis of 750 patients with high severity levels among those transferred to another hospital by a private ambulance in Busan for whole year of 2017. Results: The results showed that the following factors significantly influence the total inter-hospital transfer time: Ambulance crew (${\beta}=10.525$, p=.001) and patient and carer (${\beta}=37.606$, p<.001) when setting a doctor (selecting a medical institution) as a criterion; availability of the specialized care (${\beta}=12.435$, p=.008) when setting the near distance (reason for selecting a hospital for transfer) as a criterion. The explanatory power of this analysis was R2=0.423, whereas the explanatory power of calibration was R2=0.411. Conclusions: Factors that increase the total inter-hospital transfer time were the ambulance crew, and patient and carer's selecting a medical institution, and the reason for selecting a hospital where enables to offer the specialized care services.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.117-130
• /
• 2007

Incheon International Airport has handled 3,054,485 transfer passengers (11.9% transfer rate) and 950,441 transfer cargo(44.2% transfer rate)recorded in 2005. Comparing to 30-40% transfer passenger rate which are competition hub airports in northeast Asia, transfer passenger rate of Incheon International Airport is lower. Above all, We think that Minimum Connecting Time(MCT) which is relating factors with transfer rate need to be monitored to make up for the weak points in the current Incheon internationalairport system. Minimum Connecting Time is defined the legally minimum time necessary to change planes at a given airport. and Transfers represent 35% of the total passenger volume at Vienna International Airport in Europe, which underscores our function as a major international hub. Vienna is rated priority in reservation systems because of our excellent minimum connecting time, and that increases the sale of tickets through our airport. In 2004 the total number of transfer passengers rose 18% to 5,089,624. Short routes, a one roof concept and an outstanding logistics system make Vienna an ideal airport for transfers. This transfer-friendly one roof concept will also form the basis for the new VlE-Skylink Terminal. In case of Japan, Star Alliance has also implemented its so called "Move under one roof"concept at the new Centrair airport. All member carriers are located in the same part of the termina1, sharing check-in counters and ticketing facilities. Star Alliance member carriers can now offer customersa reduced average minimum connecting time of one hour, for transfers between international and domestic. The research purpose of the Study on the Enhancement for Minimum Connecting Time of Incheon International Airport is to increase transfer rate of passenger and cargo of Incheon International Airport at Northeast Asia through this paper.

• 소성∙가공
• /
• 제15권3호
• /
• pp.183-188
• /
• 2006

Heat transfer coefficients have great influence on finite element analysis results in elevated temperature forging processes. Experimentally calculated contact heat transfer coefficient is not suitable for one-time finite element analysis because analyzed temperature will be appeared to be too low. To get contact heat transfer coefficient for one-time finite element analysis, tool temperature in operation was measured with thermocouple and repeated finite element analysis was performed with experimentally calculated contact and cooling heat transfer coefficient. Surface temperature of active tool was obtained comparing measurement and analysis results. Contact heat transfer coefficient for one-time finite element analysis was achieved analyzing surface temperature between repeated finite element analysis and one-time finite element analysis results.

• 스마트미디어저널
• /
• 제5권4호
• /
• pp.63-68
• /
• 2016

텍스처전이(Texture Transfer) 기법은 타겟영상의 고주파 성분인 텍스쳐를 소스영상에 적용시키는 영상처리 방법이다. 이 텍스쳐 전이기법은 입력 영상에 표현되고 있는 질감 등의 스타일을 대상 영상에 전이시키는데 사용 될 수 있다. 본 연구에서는 이러한 텍스쳐 전이기법을 비디오에 적용시키기 위한 방법을 제안한다. 특히 동영상에 적용시키기 위한 실시간 병렬 처리 알고리즘을 제안한다. 이를 위해서 기존 텍스쳐 전이기법에 사용되는 커널의 모양을 변경하여 병렬화가 가능하도록 하였으며, 동영상 적용 시 발생하는 시간적 일관성문제를 해결하기 위한 방법으로 비디오 프레임 영상의 다중해상도를 사용한 광류측정법을 제안하여 적용함으로써 실시간 비디오 처리를 가능하게 하였다.

• 대한토목학회논문집
• /
• 제30권2D호
• /
• pp.99-103
• /
• 2010

본 연구는 고속버스 이용자가 고속버스 터미널에서 경험하는 불편함을 개선함으로써 대중교통 체계의 경쟁력을 높이고 효율성을 개선하기 위하여 터미널 내 연계/환승 시 체감환승시간으로 환산된 환승저항을 산정하는 모형을 구축하고 이를 바탕으로 주요 고속버스 터미널의 환승저항을 산출하였다. 그 결과 외부보행거리 100m의 증가(감소)는 통행시간 3분의 증가(감소)와 같으며, 내부보행거리 100m의 증가(감소)는 5분, 계단 100개의 증가는 약 13분의 통행시간 증가, 에스컬레이터 1대 설치는 약 3분의 통행시간 감소와 같음을 알 수 있었다. 본 연구에서 체감시간으로 산출된 환승저항은 환승센터의 환승 여건을 비교하고 시설개선의 우선순위를 판단하는 데에 객관적 지표로 활용될 수 있으며, 신규 환승센터 설계 시 시설 가이드라인을 만드는 데에도 활용이 가능하다.