• Journal of Embryo Transfer
• /
• v.27 no.4
• /
• pp.193-203
• /
• 2012

The development of embryos reconstructed by nuclear transfer is dependent upon numerous factors including the type of recipient cell, method of enucleation, the type of donor cell, method of reconstruction, activation, the cell cycle stage of both the donor nucleus and the recipient cytoplasm and the method of culture of the reconstructed embryos. Many of these points which have been reviewed extensively elsewhere (Sun and Moor, 1995; Colman, 1999; Oback and Wells, 2002; Renard et al., 2002; Galli et al., 2003b), here we will concentrate on main area, the production of suitable cytoplast and nuclear donor, nuclear-cytoplasmic coordination, oocyte activation, culture of reconstructed embryos, and the effects that this may have on development.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.285-288
• /
• 2004

This study presents a numerical procedure to optimize the shape of dimple surface to enhance turbulent heat transfer in rectangular channel. The response surface based optimization method is used as an optimization technique with Reynolds-averaged Wavier-Stokes analysis of fluid flow and heat transfer with shear stress transport (SST) turbulence model. The dimple depth-to -dimple print diameter ratio, channel height- to- dimple print diameter ratio. and dimple print diameter-to-pitch ratio are chosen as design variables. The objective function is defined as a linear combination of heat transfer coefficient and friction drag coefficient with a weighting factor. Full factorial method is used to determine the training points as a mean of design of experiment.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.4
• /
• pp.27-36
• /
• 2001

A new two-phase non-boiling convective heat transfer correlation for turbulent flow $(Re_{SL}>4000)$ in vertical tubes with different fluid flow patterns and fluid combinations was developed using experimental data available from the literature. The correlation presented herein originates from a careful analysis of the major non-dimensional parameters affecting two-phase heat transfer. This model takes into account the appropriate contributions of both the liquid and gas phases using the respective cross-sectional areas occupied by the two phases. A total of 255 data points from three available studies (which included the four sets of data) were used to determine the curve-fitted constants in the improved correlation. The performance of the new correlation was compared with two-phase correlations from the literature, which were developed for specific fluid combinations.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.307-315
• /
• 2012

Objectives : This study is to make basic materials for an effective human resource management plan by understanding relationship between self-esteem and intention of transfer of dental hygienists who are working in dental diagnostic institutions and to contribute to human resource program development for promoting development into a dental hygienic profession. Methods : This survey was carried out for dental hygienists who are engaging in dental diagnostic institutions in part of Cheonbuk Area by survey researchers for 10 days from September 14 to September 24, 2011 by visiting dental clinics after respondents replied to a questionnaire after listening to explanations of study purposes. Total 210 copies of questionnaire were retrieved and 201 copies were used as materials for the final analysis excluding 9 copies with insincere replies. Results : 1. The total average grade for self-esteem of study objects was 32.83(${\pm}3.08$) points. The total average of intention of transfer was found to be 32.91(${\pm}7.50$) points. 2. Self-esteem by satisfaction on the current workplaces was shown to be high with 'very satisfactory'(p=0.028), which has significant difference statistically (p<0.05). 3. In the intention of transfer by general characteristics, 20-25 years ($35.15{\pm}7.17$) was higher than over 40 years old ($23.44{\pm}3.47$) by age to show significant difference statistically (p=0.000). As for married status, single ($34.42{\pm}6.64$) was found to have higher intention of transfer than married ($30.28{\pm}8.11$), which showed significant difference statistically (p=0.018). As for the education background, 3 year course college graduates ($33.49{\pm}7.25$) showed more intention of transfer than over undergraduate students ($22.75{\pm}9.43$) to show significance statistically (p=0.002) and in the working years 1~3 years ($34.40{\pm}7.07$) was found to have more intention of transfer than over 10 years ($25.13{\pm}5.08$) to be significant statistically (p=0.000). The annual income less than 25 million won ($34.10{\pm}6.54$) showed more intention of transfer than over 40 million won ($21.00{\pm}0.00$) (p=0.000). 4. Intention of transfer by satisfaction of current workplaces was found to be high in 'very unsatisfactory', which showed significant difference statistically (p<0.001). 5. Pure correlation between self-esteem and intention of transfer came into existence and intention of transfer was found to be higher as self-esteem is higher. Conclusions : Through results as above, intention of transfer of dental hygienists was found to be higher as self-esteem is higher. Various follow-up studies which are to perform empirical verification by analyzing various factors which can affect intention of transfer based on this and using them as control variables are thought to be tried.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.423-430
• /
• 2017

This paper proposes a control methodology for a high efficiency operation of an inductive power transfer (IPT) converter by combining full bridge (FB) and half bridge (HB) controls. To apply the proposed control to the IPT converter, the characteristics of each control method are analyzed. By examining the output voltages of the IPT converter and a theoretical loss analysis, the control shifting points between FB and HB controls are evaluated in accordance with the coupling coefficients and the load. Based on the control shifting points, the FB-HB control algorithm is implemented. By applying FB-HB control, high efficiency operation at the light load condition can be achieved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.12
• /
• pp.1563-1575
• /
• 1997

To understand EHD nucleate boiling heat transfer enhancement, EHD effects on R-113 nucleate boiling heat transfer in a non-uniform electric field were investigated. The pool boiling heat transfer and the dynamic behavior of bubbles in d.c./a.c. electric fields under a saturated or subcooled boiling were studied by using a plate-wire electrode and a high speed camera. From the pool boiling heat transfer study, the shift of the pool boiling curve, the increase of the heat transfer and the delay of ONB and CHF points to higher heat fluxes were observed. From the dynamic behavior of bubbles, it was observed that bubbles departed away from the whole surface of the heated wire in radial direction due to EHD effects by a nonuniform electric field. With increasing applied voltages, the bubble size decreased and the active nucleation site and the departure number of bubbles showed the different trend. The present study indicates that the EHD nucleate boiling heat transfer is closely connection with the dynamic behavior of bubbles and the secondary flow induced near the heated surface. Therefore, the basic studies on the bubble behavior such as bubble frequency, bubble diameter, bubble velocity and flow characteristics are necessary for complete understanding of the enhancement mechanism of the boiling heat transfer using an electric field.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.57-63
• /
• 2002

This paper describes the acoustic analysis of mid duty truck. The focus of the analysis is on structure borne engine noise with major contributions of 2nd order. It has been previously recognized that the noise contribution of each transfer path of structure borne noise can be varied with the charateristics of each mounts and vibro acoustic sensitivity of car body. The structure of car body will be split up into three major sub components, which are modeled separately, the engine, the frame and the cab. The acoustic performance is evaluated on three levels: engine to frame transfer, frame to cab transfer, and panel contribution from cab to driver. In order to perform these analyses, analytical models are created for the engine, frame, cab and acoustic cavity. The models are linked through a coupled fluid structure calculation, and through FRF Based Substructuring for the structural couplings. Based on the structural coupling calculations, a transfer path analysis is performed to identify the most important transfer paths. These paths are then the focussing points for applying modifications to the structure or the mount system. Finally, a number of modification are proposed and their effect is quantified.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.120-127
• /
• 1996

In the WKB analysis, we propose the new forms of the trial eigenfunctions which not only converge at the turning points but also approximate to the conventional WKB solutions away from the turning points. The eigenvalue equation of multiple waveguides with graded index profile are derived by using the proposed WKB analysis and the transfer matrix method. The drived equation sare represented in the recursive form. The results of the eigenvalue equation sare comapred with those of the FDM, one of the well-known computational methods, for a three-waveguide coupler.

• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.101-107
• /
• 2015

In this paper, we review the domestic reliability standards and its global counterparts IEC/TC 56 international reliability standards. Recently private transfers of reliability certification control tower has established in Korea. Some check points to consider regarding the control tower transfer process to the non-government organization are suggested. Also the IEC/TC 56 and its relevant reliability standards are introduced. Understanding of the IEC/TC56 system will be helpful for the time of non-government organization control tower transfer in the reliability certificate specification

• Journal of Embryo Transfer
• /
• v.8 no.1
• /
• pp.37-44
• /
• 1993

Nuclear transplantation techinque has been found to be the most potential and efficient method for producing a large number of genetically identical animals from a single embryo. The technical development of nuclear transplantation in mammals and its application to the production of cloned animals were reviewed. For the efficient and successful production of cloned embryos by nuclear transplantation, selection and micromanipulation of recipient eggs or embryos as capacious recipient cytoplasm, and benefitial preparation of multiple totipotent embryonic cells as donor nuclei, and also fusion technique are very critical. Recent works approaching to these critical points were introduced and discussed.