• The KSFM Journal of Fluid Machinery
• /
• v.10 no.3 s.42
• /
• pp.17-24
• /
• 2007

This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

• Information and Communications Magazine
• /
• v.4 no.4
• /
• pp.505-524
• /
• 1987

Nowaday all the countries of the world have studied the various problems caused in operating their own ports efficiently. Ship delay in the port is attributal to the inefficient operation in the navigation aids, the cargo handling, the storage and transfer facilities, and to the inefficient allocation of gangs or to a bad service for ships. Among these elements the allocation of gangs is the predominating factor in minimizing ship's turn round time. At present, in the case of Pusan Port. the labour union and stevedoring companies allocate gangs in every hatches of ships by a rule of thumb, just placing emphasis on minimizing ship's turn round time, without applying the principle of allocation during the cargo handling. Owing to this the efficiency of the cargo handling could not be expected to be maximized and this unsystematic operation result in supplying human resources of much unnecessary surplus gangs. Therefore in this paper the optimal size and allocation of gangs for minimizing the ship's turn round time is studied and formularized. For the determination of the priority for allocation the evaluation function, namely $F=PHi^{n}{\times}(W+H)$, can be obtained; where, PHI : Principal Hatch Index W : Total Cargo Weight represented in Gang-Shifts H : Total Number of Ship's hatches and also for the optimal size of gangs the average number of gang allocated per shift (Ng), namely Ng=W/PHI, is used. The proposed algorithm is applied to Pusan Port and its validity is verified.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2307-2309
• /
• 2004

This paper presents a modeling and simulation of a fuzzy controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.225-230
• /
• 1992

In this paper, a new learning fuzzy logic controller(LFLC) is presented. The proposed controller is composed of the main control part and the learning part. The main control part is a fuzzy logic controller(FLC) based on linguistic rules and fuzzy inference. For the learning part, artificial neural network(ANN) is added to FLC so that the controller may adapt to unknown plant and environment. According to the output values of the ANN part, which is learned using error back-propagation algorithm, scale factors of the FLC part are determined. These scale factors transfer the range of values of input variables into corresponding universe of discourse in the FLC part in order to achieve good performance. The effectiveness of the proposed control strategy has been demonstrated through simulations involving the control of an unknown robot manipulator with load disturbance.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.815-824
• /
• 2015

In this study, we conducted the approximate multi-objective optimization of gap sizes of pressurized-water reactor (PWR) annular fuels. To determine the contacting tendency of the inner-outer gaps between the annular fuel pellets and cladding, thermoelastic-plastic-creep (TEPC)analysis of PWR annular fuels was performed, using in-house FE code. For the efficient heat transfer at certain levels of stress, we investigated the tensile, compressive hoop stress and temperature, and optimized the gap sizes using the non-dominant sorting genetic algorithm (NSGA-II). For this, response surface models of objective and constraint functions were generated, using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by NSGA-II were verified through the TEPC analysis, and we compared the obtained optimum solutions and generated errors from the CCD and D-optimal design. We observed that optimum solutions differ, according to design of experiments (DOE) method.

• Computers and Concrete
• /
• v.2 no.4
• /
• pp.267-291
• /
• 2005

To date, many studies have been conducted for the analysis and design of reinforced concrete members with disturbed regions. However, prestressed concrete deep beams have not been the subject of many investigations. This paper presents an evaluation of the behavior and strength of three pre-tensioned concrete deep beams failed by shear and bond slip of prestressing strands using a nonlinear strut-tie model approach. In this approach, effective prestressing forces represented by equivalent external loads are gradually introduced along strand's transfer length in the nearest strut-tie model joints, the friction at the interface of main diagonal shear cracks is modeled by the aggregate interlock struts along the direction of the cracks in strut-tie model, and an algorithm considering the effect of bond slip of prestressing strands in the strut-tie model analysis and design of pre-tensioned concrete members is implemented. Through the strut-tie model analysis of pre-tensioned concrete deep beams, the nonlinear strut-tie model approach proved to present effective solutions for predicting the essential aspects of the behavior and strength of pre-tensioned concrete deep beams. The nonlinear strut-tie model approach is capable of predicting the strength and failure modes of pre-tensioned concrete deep beams including the anchorage failure of prestressing strands and, accordingly, can be employed in the practical and precise design of pre-tensioned concrete deep beams.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.283-288
• /
• 2011

This paper have proposed an object retrieval using the corners area variability based on correlogram. The proposed algorithm is processed as follows. First, the corner points of the object in an image are extracted and then the feature vectors are obtained. It are rearranged according to the number dimension and consist of sequence vectors. And the similarity based on the maximum of sequence vectors is measured. The proposed technique is invariant to the rotation or the transfer of the objects and more efficient in case that the objects present simple structure. In simulation that use Wang's database, the method presents that the recall property is improved by 0.03% and more than the standard corner patch histogram.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.173-178
• /
• 2004

A network of Asynchronous Transfer Mode (ATM) will be required to carry the traffics(CVR, VBR, UBR. ABR) generated by a wide range of services ATM services the Quality-of-Service (QoS) management of traffice sources and bandwidth. Besides efficiency and throughput, the security services are achieved in the traffic sent in ATM network. In this paper, the scheduler evaluate and the packets sent in ATM security group. The scheduler transmits the safty packet, drop the unsafty packet and evaluate mark packet as the requirement of the delay. In this paper, we propose the scheduling algorithm of mark packet which evaluates the packet. The suggested model performance of the firewall switch is estimate simulation in terms of the delay by computer.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.35-40
• /
• 2014

Many researches have been conducted to achieve improvement in distributed system that connects multiple computer systems via communication lines. Among others, the load balancing and file migration are considered to have significant impact on the performance of distributed system. The dynamic file migration algorithm common in distributed processing system involved complex calculations of decision function necessary for file migration and required migration of control messages for the performance of decision function. However, the performance of this decision function puts significant computational strain on computer. As one single network is shared by all computers, more computers connected to network means migration of more control messages from file migration, causing the network to trigger bottleneck in distributed processing system. Therefore, it has become imperative to carry out the research that aims to reduce the number of control messages that will be migrated. In this study, the learning automata was used for file migration which would requires only the file reference-related information to determine whether file migration has been made or determine the time and site of file migration, depending on the file conditions, thus reflecting the status of current system well and eliminating the message transfer and additional calculation overhead for file migration. Moreover, mathematical model for file migration was described in order to verify the proposed model. The results from mathematical model and simulation model suggest that the proposed model is well-suited to the distributed system.