• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.491-495
• /
• 2005

Micro injection molding analysis for microneedle fabrication was performed in the present study. The dimensions of width and thickness for in-plane microneedle are $600{\mu}m$, $500{\mu}m$, respectively. A delivery system based on guidelines for traditional injection molding was designed for four-cavities molding system. To investigate the effects of processing conditions in the mirconeedle fabrication, injection molding analysis using commercial code was performed. It was shown that the total injection time has a significant effect on the fabrication of in-plane microneedles.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.55-59
• /
• 2005

Micro injection molding analysis for microneedle fabrication was performed in the present study. The dimensions of width and thickness for microneedle are 600um, 500um, respectively. A delivery system based on guidelines for traditional injection molding was designed for four-cavities molding system. To investigate the effects of processing conditions in the mirconeedle fabrication, injection molding analysis using commercial code was performed. It was shown that the total injection time has a significant effect on the fabrication of microneedles.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.173-177
• /
• 2005

Addition of 30% propylene glycol was required to maintain sink condition in the evaluation of percutaneous absorption of estradiol and norethindrone acetate. The permeability of estradiol was higher in silicone and SIS adhesives. However, estradiol was crystallized in silicone, SIS, and SBS adhesive matrix. The permeability ratio of estradiol or norethindrone acetate from acrylic pressure sensitive adhesives varied widely depending on the functional group of the acrylic adhesives. PEO grafting to acrylic adhesive seemed to change physicochemical property of acrylic adhesive and increased the permeability of estradiol and norethindrone acetate significantly. On the contrary, highly cross-linked enhancer compatible acrylic adhesive decreased the permeability of both estradiol and norethindrone acetate. $Span^{\circledR}$ 20 provided the highest enhancing effect on the permeability of both estradiol and norethindrone acetate followed by oleic acid and $Crovol^{\circledR}$ EP40. The permeability of the drugs from the developed system was comparable to that from commercial $Combitran^{\circledR}$, although significantly lower amount of estradiol and norethindrone acetate were loaded in the developed system.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.91-96
• /
• 2000

We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying drug delivery system(DDS). Natural gums were selected as material of TTS. The permeation of natural gums ointment containing drug in rat skin using diffusion cell model. Permeation properties of materials were investigated for water soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more hydration than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in riboflavin. The permeation rate of content enhancer and drug was found to be faster than that of content riboflavin only. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. All the gum ointment tested showed good safety. Proper selection of the materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.552-560
• /
• 2012

Drug delivery technologies are patent protected formulation technologies that modify drug release profile, absorption, distribution, and elimination for the benefit of improving product efficacy and safety, as well as patient convenience and compliance. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other method of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stop if the drug dosage lead to side effect. Polysaccharide, such as karaya gum and locust bean gum(LBG)/water-soluble chitosan oligomer(WSCO) were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, tacrine contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in tacrine such as lipophilic drug in vitro. We used glycerin, PEG 400, and PEG 800 as enhancers. Therefore, transdermal absorption of tacrine could be improved by changing vehicle composition or by using penetration enhancers. Especially it would be anticipated that the high permeation efficacy could be obtained by using vehicle that has enhancing effect for itself and by adding enhancers to it.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.111-115
• /
• 1999

We have studied the transdermal flux of prostaglandin $E_1$ $(PGE_1)$ from a hydrogel patch through hairless mouse skin, to test the possibility of developing a transdermal delivery system. Karaya gum patch containing $PGE_1$ was prepared by casting method. $PGE_1$ was stable in the patch for 10 weeks. The effect of current application, enhancer (propylene glycol monolaurate : PGML), adhesive and patch thickness on the flux was studied using side-by-side diffusion cell. Passive flux of $PGE_1$ was negligible. Cathodal delivery increased the flux about 20 fold. As the concentrations of PGML increased, flux increased. When 5% PGML was used as the enhancer, maximum flux by cathodal iontophoresis was $55\;{\mu}g/cm^2\;hr$. It increased about 2 folds to $100\;{\mu}g/cm^2\;hr$, when the amount of PGML used was 9%. Large increase in flux and the decrease in time to reach maximum flux were observed when the skin was pretreated with neat PGML (maximum flux obtained was about $200\;{\mu}g/cm^2\;hr$). Use of adhesive decreased the flux significantly. To the contrary of our expectation, increase in current density decreased the flux. These flux data together with the stability data indicate that, though the onset of sufficient delivery occur after 1-2 hours of application, therapeutic amount of $PGE_1$ can be delivered through skin using iontophoresis and penetration enhancer.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.79-84
• /
• 2010

Osteoporosis was traditionally defined by the occurrence of nontraumatic fractures, especially of the spine, in the setting of low bone mass. Bisphosphonates are an important group of therapeutic agents for the management of osteoporosis, as they inhibit bone resorption and increase bone density, thereby potentially decreasing fracture risk. Risedronate sodium is a bisphosphonate class used by oral formulation. In this study, risedronate was transdermally delivered by iontophoresis. Effects of polarity, pH, current density, and drug concentration were studied using a side-by-side diffusion cell including the hairless mice skin. In addition we studied effect of enhancers. The flux was evaluated by HPLC/UV system. The amount of transported drug under iontophoretic delivery was approximately 186 fold higher than that under passive delivery. Flux was proportional to the increase of drug concentration and current density. The flux was observed about 0.68mg/$cm^2$ when the amout of Propyleneglycol monolaurate (PGML) used 1% as enhancer. Results indicated that iontophoresis is an effective method for transdermal administration of risedronate sodium

• Journal of Pharmaceutical Investigation
• /
• v.28 no.1
• /
• pp.43-50
• /
• 1998

Niosomes are vesicles formed from synthetic non-ionic surfactants, offering an alternative to chemically unstable and expensive liposomes as a drug carrier. Non-ionic surfactant and cholesterol mixture film leads to the formation of vesicular system by hydration with sonication method. The formation of niosome was ascertained by negative staining of TEM. The entrapment efficiency of niosomal suspension was gradually increased with increasing the ratio of cholesterol to surfactant. It was found that the niosome with 6 : 4 (polyoxyethylene 2-cetyl ether: cholesterol) ratio was more stable than those with other ratios. The topical application of acyclovir(ACV) in the treatment of herpes simplex virus type 1(HSV-1) skin disease has a long history. There are an increasing number of reports, however, in which topical ACV therapy is not as effective as oral administration. Lack of efficacy with topical ACV has been hypothesized to reflect the inadequate delivery of drug to the skin. We investigated the permeation of niosome containing $[^{3}H]ACV$ in hairless mouse skin using Franz diffusion cell model. Permeation coefficient(P) of aqueous ACV was $6.7{\times}10^{-4}\;(cm/hr)$ and that of ACV in niosome was $23.4{\times}10^{-4}\;(cm/hr)$, suggesting about 3.5 times increase in the transdermal permeation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1433-1434
• /
• 2010

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.1-5
• /
• 1996

Laminated films composed of drug-containing reservoir layer and drug-free membrane were prepared. Zero-order drug release with lag time was achieved by laminating drug-free film onto the reservoir layer, while burst effect was observed on cast-on film. The rate controlling membrane was either attached to or cast directly into the reservoir. The release rate was independent on the reservoir composition but dependent on the composition of rate-controlling membrane. In growth inhibitory test of cephalexin from Eudragit RS film to Streptococcus Mutans, the disk even after release test for 72 hours showed more bacterial growth inhibition than that of control. Permeation of drug through rat skin was proportional to the HPC fraction in the film. We could control the release of cephalexin from the film by changing the fraction of Eudragit RS, HPC and DEP content. Consequently, Eudragit RS/HPC film was found to be very effective system for local delivery of drugs.