• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.258-265
• /
• 2017

This paper validates a system identification method using mathematical optimization using sea trial measurement data as a benchmark. A fast time simulation tool, SIMOPT, and a Rheinmetall Defence mathematical model have been adopted to conduct initial hydrodynamic coefficient estimation and simulate ship modelling. Calibration for the environmental effect of sea trial measurement and sensitivity analysis have been carried out to enable a simple and efficient optimization process. The optimization process consists of three steps, and each step controls different coefficients according to the corresponding manoeuvre. Optimization result of Step 1, an optimization for coefficient on x-axis, was similar compared to values applying an empirical regression formulae by Clarke and Norrbin, which is used for SIMOPT. Results of Steps 2 and 3, which are for linear coefficients and nonlinear coefficients, respectively, was differ from the calculation results of the method by Clarke and Norrbin. A comparison for ship trajectory of simulation results from the benchmark and optimization results indicated that the suggested stepwise optimization method enables a coefficient tuning in a mathematical way.

• Journal of Advanced Navigation Technology
• /
• v.6 no.2
• /
• pp.119-129
• /
• 2002

Maneuvering targets are difficult to track for the Kalman filter since the target model of tracking filter might not fit the real target trajectory and the statistical characteristics of the target maneuver are unknown in advance. In order to track such a highly maneuvering target, several schemes have been proposed and improved the tracking performance in some extent. Among those tracking schemes the Input Estimation (IE), Variable Dimension (VD) and Turning Acceleration Estimator (TAE) became popular. However, so far their tracking performances were analyzed individually and were not compared. In this paper, the tracking performances of the typical IE, VD and TAE schemes for a maneuvering target are compared. Monte-Carlo Simulations for three maneuvering profiles are carried out and the results are analyzed towards practical applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1233-1240
• /
• 2010

In the flat panel display and semiconductor industries, the visual alignment system is considered as a core technology which determines the productivity of a manufacturing line. It consists of the vision system to extract the centroids of alignment marks and the stage control system to compensate the alignment error. In this paper, we develop a Kalman filter algorithm to estimate the alignment mark postures and propose a coarse-fine alignment control method which utilizes both original fine images and reduced coarse ones in the visual feedback. The error compensation trajectory for the distributed joint servos of the alignment stage is generated in terms of the inverse kinematic solution for the misalignment in task space. In constructing the estimation algorithm, the equation of motion for the alignment marks is given by using the forward kinematics of alignment stage. Secondly, the measurements for the alignment mark centroids are obtained from the reduced images by applying the geometric template matching. As a result, the proposed Kalman filter based coarse-fine alignment control method enables a considerable reduction of alignment time.

• Coupled systems mechanics
• /
• v.2 no.1
• /
• pp.23-51
• /
• 2013

An analytical algorithm for the estimation of the resistance forces exerted on the dipper of a cable shovel and the specific energy consumed in the cutting-loading process is presented. Forces due to payload and to cutting of geomaterials under given initial conditions, cutting trajectory of the bucket, bucket's design, and geomaterial properties are analytically computed. The excavation process has been modeled by means of a kinematical shovel model, as well as of dynamic payload and cutting resistance models. For the calculation of the cutting forces, a logsandwich passive failure mechanism of the geomaterial is considered, as has been found by considering that a slip surface propagates like a mixed mode crack. Subsequently, the Upper-Bound theorem of Limit Analysis Theory is applied for the approximate calculation of the maximum reacting forces exerted on the dipper of the cable shovel. This algorithm has been implemented into an Excel$^{TM}$ spreadsheet to facilitate user-friendly, "transparent" calculations and built-in data analysis techniques. Its use is demonstrated with a realistic application of a medium-sized shovel. It was found, among others, that the specific energy of cutting exhibits a size effect, such that it decreases as the (-1)-power of the cutting depth for the considered example application.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.385-392
• /
• 2018

This paper suggests a new method to estimate the roll and pitch damping moment coefficients of a flying disc through sensor data from the onboard IMU module. This method can be easily performed than wind tunnel or computational fluid dynamics methods because it estimates aerodynamic coefficients simply after accumulating the inertial data through several repeated flight experiments. Estimated coefficients are applied to a simulator which is based on the flight dynamics of a flying disc. Finally, the predicted flight trajectory is compared with the true position provided by GPS, which demonstrated the validity of the proposed estimation method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.95-104
• /
• 2012

In this paper, an estimation of person height and 3D location of a moving person by using the pan/tilt-embedded stereo tracking system is suggested and implemented. In the proposed system, face coordinates of a target person is detected from the sequential input stereo image pairs by using the YCbCr color model and phase-type correlation methods and then, using this data as well as the geometric information of the stereo tracking system, distance to the target from the stereo camera and 3-dimensional location information of a target person are extracted. Basing on these extracted data the pan/tilt system embedded in the stereo camera is controlled to adaptively track a moving person and as a result, moving trajectory of a target person can be obtained. From some experiments using 780 frames of the sequential stereo image pairs, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.5, 0.42 for 780 frames on average, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. These good experimental results suggest a possibility of implementation of a new stereo target tracking system having a high degree of accuracy and a very fast response time with this proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.295-300
• /
• 1998

In this paper, we point out the possibility of the divergence of control input caused by the estimation error of delay-time when general iterative learning algorithms are applied to a class of linear dynamic systems with time-delay in which delay-time is not exactly measurable, and then propose a new type of iterative learning algorithm in order to solve this problem. To resolve the uncertainty of delay-time, we propose an algorithm using holding mechanism which has been used in digital control system and/or discrete-time control system. The control input is held as constant value during the time interval of which size is that of the delay-time uncertainty. The output of the system tracks a given desired trajectory at discrete points which are spaced auording to the size of uncertainty of delay-time with the robust property for estimation error of delay-time. Several numerical examples are given to illustrate the effeciency of the proposed algorithm.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.161-169
• /
• 2006

Load representation has a significant impact on power system analysis and control results. In this paper, composite load models are developed based on on-line measurement data from a practical power system. Three types of static-dynamic load models are derived: general ZIP-induction motor model, Exponential-induction motor model and Z-induction motor model. For the dynamic induction motor model, two different third-order induction motor models are studied. The performances in modeling real and reactive power behaviors by composite load models are compared with other dynamic load models in terms of relative mismatch error. In addition, numerical consideration of ill-conditioned parameters is addressed based on trajectory sensitivity. Numerical studies indicate that the developed composite load models can accurately capture the dynamic behaviors of loads during disturbance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1269-1279
• /
• 1995

A mobile robot in a nuclear power plant is usually needed to equip the ability of going up and down stairs for a some kind of inspection. For this purpose, it is necessary for the mobile robot to figure out the size of stairs laid on a navigation path to gurantee robot's moving freely. In this paper, to measure the size of stairs existing in front of a mobile robot we designed the stair size recognition unit which can measure the stair's height and width using an ultrasonic sensor and/or a CCD camera. Also to obtain higher reliability of ultrasonic sensing data we proposed the horizontal sensing method. On the assupmtions that the mobile robot generates a trajectory while ascending stairs, we simulated it on a IBM compatible computer. The result showed that the suggested method satisfied our purpose. In a stair size estimation, the detected stair's height error was about .+-.3mm, and width was about .+-.5mm.