• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.121-126
• /
• 1999

In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed. In order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. Also, the learning architecture to compute inverse kinematic coordinates transformations in the manipulator of auto-equipment systems is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulations are provided to demonstrate the effectiveness of the proposed learning method using the DNP.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.187-187
• /
• 1999

in order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed. Also, the learning architecture to compute inverse kinematic coordinates transformations in the manipulator of auto-equipment system is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulation are provided to demonstrate the effectiveness of the proposed learning method using the DNP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.382-390
• /
• 2009

This paper newly proposes a modular type dynamic encoding algorithm for searches (DEAS) which partitions the whole parameters into several modules and carries out exhaustive DEAS for each module. uDEAS is used to measure parameter sensitivities to the cost function, and the variables whose sensitivities are similar are grouped to make a module. The proposed optimization method is applied to optimal trajectory generation for biped walking of a humanoid. and the optimization result is compared with those of the former versions of DEAS.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.31-37
• /
• 2002

This paper presents a new motion control strategy for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. This paper aims at the development of a new efficient method to control robot motion near and at singularities. The proposed method has focused on generating the optimal joint trajectory for a Cartesian end-effector path within the speed limit of each joint by using the speed limit avoidance as well as the acceleration/deceleration scheme. The proposed method was verified using MATLAB-based simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.178-186
• /
• 1998

In this paper, a robust.adaptive learning control scheme is presented for precise trajectory tracking of rigid mobile robots. In the proposed controller, a set of desired trajectories is defined and used in constructing the control input and learning rules which constitute the main part of the proposed controller. Stable operating characteristics such as precise trajectory tracking, parameter estimation, disturbance suppression, etc., are shown thorugh experiments and computer simulations.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1601-1609
• /
• 1988

In the control of the robotic manipulators, the variable structure control method for the set point Regualation has an advantage of the insensitivity about parameter variations and disturbances. When the robotic manipulatores are controlled by a point-to-point scheme, no path constraint is considered. Thus, the variable structure control method will be effectively applied only if the trajectory of the robot hand is estimated precisely. In this paper, the joint trajectories in the joint space and the hand trajectory in the cartesian space are calculated by the variable structure control method, and an algorithm is suggested to elaborate the deviation error of the robot hand from a straight line path. The result of this study will become a base of the effective path planning about robotic manipulators with the variable structure control concept.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.513-515
• /
• 2016

There are various walking devices based on Theo Jansen mechanism. And these systems controlled by complicate equations. So we decided to optimize the design of walking device with two points of view. The device is required to ensure stability while maintaining the high speed. To simplify the control system, we applied trigonometric ratio with ideal Jansen trajectory. As a result, we were able to draw the connection between height of barrier and Ground Length (GL). Also we could change traveling distance and Ground Angle Coefficient (GAC) by shifting the position of the joints. Through controlling these parameter, we can analyze stability and speed of the device. Ultimately, we develop the device that can walk more efficiently by the optimization process.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.28-30
• /
• 2002

시간에 따라 연속적으로 위치가 변화하는 객체를 이동체라 한다. 기존의 R-Tree를 사용한 이동체 색인에 관한 연구에서는 현재 위치 질의 시 고비용의 연산이 요구되고, 시간축의 값이 증가하는 방향으로 보고되는 이동체의 위치데이터의 특징을 고려한 노드 분할 정책이 제안되지 않았다. 이 논문에서는 이동체의 현재 위치 및 과거 위치에 대한 색인 방법인 CPTR-Tree(Current Position and Trajectory R-Tree)를 제안한다. 특히, 제안 방법에서 이동체의 현재 위치에 대한 공간차원의 PMBR(Point MBR)을 유지함으로써, 현재 위치 질의 처리시 불필요한 노드 접근 횟수를 줄일 수 있어 성능향상을 할 수 있다. 그리고, 시간축의 값이 증가하는 형태로 보고되는 이동체 위치 데이터의 특징을 고려하여 시간축 분할시 SP(Split Parameter) 분할 방법을 제공함으로써 노드 공간 활용률을 높여 색인의 크기를 줄이고, 공간축 분할시 노드 겹침을 줄이는 동적 클리핑 분할 정책을 제시하여 이동체 과거 위치 검색 효율을 높인다.

• Earthquakes and Structures
• /
• v.22 no.4
• /
• pp.421-430
• /
• 2022

This paper addresses the stochastic control problem of robots within the framework of parameter uncertainty and uncertain noise covariance. First of all, an open circle deterministic trajectory optimization issue is explained without knowing the unequivocal type of the dynamical framework. Then, a Linear Quadratic Gaussian (LQG) controller is intended for the ostensible trajectory-dependent linearized framework, to such an extent that robust hereditary NN robotic controller made out of the Kalman filter and the fuzzy controller is blended to ensure the asymptotic stability of the non-continuous controlled frameworks. Applicability and performance of the proposed algorithm shown through simulation results in the complex systems which are demonstrate the feasible to improve the performance by the proposed approach.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.109-115
• /
• 2010

This paper deals with trajectory control of computer simulated mobile robot via fuzzy control. Mobile robot is controlled by Mamdani type fuzzy controller. Inputs of the fuzzy controller are angle between mobil robot and target, changed angle and output is the steering angle, which is control input. Fuzzy rules have seven rules and are selected by human experiential knowledge. Also we propose a scaling factors tuning scheme which is the another focus in designing fuzzy controller. In this paper, we adapt the RCGA which is well known in parameter optimization to adjust scaling factors. The simulation results show that the fuzzy control effectively realize trajectory stabilization of the mobile robot along a given reference target from various initial steering angles.