• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.13-17
• /
• 2004

Purpose: The purpose of this study is to predict a reasonable direction to design a pertinent educational program in the future by evaluating an adult CPR(Cardiopulmonary Resuscitation) skill performed by EMTs engaged in fire services organization and comparing the CPR success rate of factors as like a duty place and licensed year. Methods: We studied CPR skill by the use of a CPR manikin(Skillmeter Resusci Annie, Laerdal company). The study population consisted of 320 EMTs. Every EMT performed four cycle after investigating the manikin for 2 minutes. We regarded chest compression with 100 times in a minute as the 100% success rate. We analysed the skill of chest compression, ventilation and chest compression times success rate by the records printed in the CPR paper. Results: The average success rate of chest compression was 59.42$\pm$29.26% and ventilation 49.22$\pm$29.65%. The success rate of manual CPR was different between chest compression and ventilation. Also the success rate of chest compression times was high relatively as a 87.32$\pm$9.14%(p=0.000). For the CPR skill, ventilation was lowest as 49.22%. The factors such as duty place and licensed year did not influence the CPR success rate (p>0.001). Conclusion: We could have conclusion that CPR training should be shared more time in ventilation than in chest compression. Also we could reach to a conclusion that it is important to increase the times of CPR training for improving the accuracy of CPR and that the continuing education of CPR training frequency might be more than four times in a year.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.112-118
• /
• 2014

Objective: The purpose of this study was to investigate the effects of an exercise with and without neuromuscular electrical stimulation (NMES) of the quadriceps femoris muscle, on strength, pain, and weight distribution in patients with knee instability post surgery. Design: Randomized controlled trial. Methods: Twenty patients in the early stage of rehabilitation after knee surgery were recruited as subjects and were randomly divided into either experimental group (exercise combined with NMES) (n=10) or control group (n=10). Both groups received strength training of the lower limb for 20 min/day, 5 days/week for 4 weeks. The experimental group used NMES for unilateral quadriceps femoris training with incremental increases in the intensity of isometric contraction over 4 weeks. Outcome measurements were assessed using the digital manual muscle testing, 30-chair stand test (30CST), numeric pain rating scale (NPRS) and weight distribution using the foot analyzer before and after 4 weeks of training. Results: After the 4-week intervention, knee extensor strength increased significantly in the experimental group post intervention (p<0.05), and there was a significant improvement in the experimental group compared with the control group (p<0.05). The 30CST and NPRS scores improved significantly in the experimental group compared to the control group (p<0.05), and there was a significant difference between the two groups (p<0.05). Weight distribution was significantly improved in the experimental group compared with the control group, (p<0.05), but there was no significant difference in improvement between the two groups. Conclusions: This study showed that NMES combined with strengthening exercises of the lower limbs is effective in improving lower limb pain and strength in patients with instability after knee surgery.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.4
• /
• pp.85-97
• /
• 2022

Purpose : This study aimed to investigate the effects of a digital pegboard training program with visual and auditory feedback on hand function and visual perception in stroke patients. Methods : Twenty two participants were randomly assigned to an experimental or control group. The experimental group received training using a digital pegboard training program with visual and auditory feedback (n=11), while traditional occupational therapy was administered to the control group (n=11). Hand function was assessed before and after the intervention using the Nine-Hole Peg Test and manual function test (MFT), while visual perception was assessed using the Motor-Free Visual Perception Test-3rd edition (MVPT-3). Results : Following the intervention, both the experimental and control groups showed significant improvements in performance in the Nine-Hole Peg Test and MVPT-3 (p<.05). The improvement on both tests was significantly greater in the experimental group than in the control group (p<.05). Conclusion : The results suggest that digital pegboard training with visual and auditory feedback may improve hand function and visual perception in stroke patients. Therefore, this intervention can be effective in occupational therapy to aid the recovery of stroke patients.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.905-908
• /
• 1987

A human operator has the ability to control a complicated system such as a gantry crane, an aircraft and a remote manipulator after enough training and learning. In this article, we attempt the positioning experiment of a flexible arm by a human operator. Flexible arm has nonlinearlity and infinite-degrees of freedom in general; thus it is difficult to obtain a control input. The operator interprets a given task and finds the procedure of operations. He devises an effective way of achieving the goal on the basis of his experience and knowledge about the task.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.450-454
• /
• 2007

The purpose of this study was to offer objective information about standard of selecting and training fashion models by verifying anthropometric characteristics and comparing with general women. Total forty eight fashion models (M=20.08yr ; SD=1.7) were recruited by convenience sampling. Thirty eight items of participants were measured by manual of International Society for the Advancement of Kinanthropometric (ISAK). Mean and standard deviation of 38 items and also factor of somatotype (endomorph, mesomorph, ectomorph) were calculated. In the result, somatotype of fashion model was endomorphic ectomorphy, less muscle and taller height. Conclusionally, this study indicated that there is less mesomorphy rating related to muscle quantity, bone mass in somatoplot. However, it is necessary to provide the program enhancing the physical activity with model department.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.203-205
• /
• 1997

In this paper, we present a useful method of estimating earth resistivity using BP algorithm in Neural-Networks. From this method, equivalent earth resistivity(EER) can be obtained directly using training data composed of field-measured apparent resistivity and probe distance. This approach can reduce errors which is conventionally raised from manual operation of calculating EER. To evaluate its accuracy and convenience, the result of proposed method is compared to that of conventional methods, graphical($\rho$-a graph) and numerical(CDEGS program), respectively.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.260-265
• /
• 2002

There are many methods for muscle strengthening. Muscle strengthening with eccentric contraction work is the best way by researcher's report. Also, eccentric contraction need proper resistance for muscle strengthening. Combination of isotonic in PNF is a muscle strengthening method with manual resistance. It makes concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction with continually and without muscle relaxation. Combination isotonic technique use with PNF pattern. Therefore, it will make development and increasing of active control motion, coordination, actual range of motion, strengthen and functional training in eccentric control of movement. Concentric contraction have the 3rd lever system and eccentric contraction have the 2nd lever system with combination of isotonic. Serial concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction make strong SEC and PEC. It will be increase elasticity of SEC, PEC and contractile components either.

• Journal of Fashion Business
• /
• v.3 no.3
• /
• pp.59-67
• /
• 1999

The results of study can be summarized as follows: 1. Few sewing companies committed their workers to a professional and systematic training course. 2. Brands as Brother, Juki, Yamato, Singer and Nara were being much used. Among them the Brother was most popular. The age of the sewing machines was between one and six years. Most companies were repairing their machines. The manual main sewing machines were more frequently out of order than other machines. The ratio of idle machines was highest in sewing work, compared with cutting or finishing work, primarily due to decreased orders, aging machines or reduced manpower. 3. Most of the sewing companies were feeling necessary for automated sewing machines.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.79-89
• /
• 1992

Indicies of the labor productivity were assessed from 80 industry foodservice erstablishments in terms of meals served per labor hour, labor minutes per meal served, and labor cost per meal served. The labor productivity indicies were also assessed according to variables related to work such as working hours, paryment for the workers, volume of feeding, utilization of foodservice equipment, use of processed foods, and background of employees. The summary of the results was as follows: 1. Manufacturing sector among surveyed industry foodservice showed the highest labor productivity indicies followed by training institute. 2. 28.8% of surveyed establishments used dishwashing machine, while manual dishwashing was used in 71.3% of subjects, equipped rate point was 9.8 out of 20, and disposable dish was used in 30% of subjects. 3. A significant positive relationship was found between the number of meals and the labor procductivity indicies. As the number of meals increased, more meals were served per worker as per labor hour. 4. A significant negative relationship was found between price of meal and the labor productivity didicies. As the price of meal increased, less meals were served per worker as well as per labor hour.