• Journal of Digital Contents Society
• /
• 제19권2호
• /
• pp.285-292
• /
• 2018

Though the latest ICT technology is expected to serve as a bridgehead for future industrial development as the core of the 4th Industrial Revolution, the gap in ICT technology is still directly connected to the disparity in wealth and it is widening. Training to foster female ICT capabilities in developing countries is an opportunity to foster quality workforce for national development and a means to close the technology gap. The study aims to investigate the status of infrastructure and ICT education at UHP University in Indonesia, as a preparation for educating students in developing countries with ICT skills. Based on this survey, we develop appropriate ICT education contents for female students and provide necessary policies for ongoing education. We will seek ways to improve efficiency in education by comparing and analyzing the results of the previous research, Life University survey.

• Journal of Digital Convergence
• /
• 제13권5호
• /
• pp.357-363
• /
• 2015

This study investigated the antioxidant and anti-inflammatory effects of Galla Rhois (Rhus verniciflua) on LPS (lipopolysaccharide)-stimulated human osteoblastic cells (MG-63). The aim of this study was to evaluate the LPS induced nitric oxide (NO) production and antioxidant radical in human osteoblast-like MG-63 cells. Therefore, the present work indicate that Galla Rhois extracts may be an ideal candidate for further research into their use for dental caries prevention component as well as, natural plant-based products. This suggested that 80% methanol and hexane extracts of Galla Rhois were inhibited NO generation and 1,1-diphenyl-2-pirylhydrazyl (DPPH) radical. Therefore, 80% methanol and hexane extracts of Galla Rhois may be utilized as a good source of protection against inflammation and oxidative stress. This study is intended to pursue wellness convergence in quality of life in the excavations in natural ingredients to create a variety of oral products with fewer side effects, cheap oral products for the dental treatment.

• Journal of the East Asian Society of Dietary Life
• /
• 제26권6호
• /
• pp.517-530
• /
• 2016

This research was conducted on Seoul region elementary, middle, and high school nutritionists to analyze execution conditions of HACCP control standards, focusing on PHF and CCP 3~CCP 7, in order to determine more efficient methods for school meals' sanitation system settlement. All surveys were distributed and collected via email. A total of 305 survey papers were collected, and 300 school results were analyzed. The following percentage of nutritionists perceived the following foods as potentially hazardous foods(PHF): raw or cooked animal foods (94.7%), blossomed seed products (93.7%), packed pickled radish (36.7%), unopened mayonnaise (30.2%), and unopened snails & corn cans 54.8%. Exactly 51.2% of nutritionists believed that foods were properly supplied via CCP 3's food quality standard. Exactly 33.9% of nutritionists answered that they had never corrected the digital thermometer since there were no issues with the CCP 4's digital thermometer correction frequency level. As for CCP 5's chroline disinfection of green vegetables, 57.1% of nutritionists answered that vegetables were slightly softened while 36.2% said there were no changes at all. According to the nutritionists, the most difficult execution level of CCP levels (excluding CCP 3, CCP 4) was CCP 7 (37.1%), CCP 6 (16.4%), and CCP 2 (16.4%). For the above results, proper training/education must be enforced so that nutritionists can have a clear notion of the PHF. A solution must be developed enhancing the execution of CCP 4's digital thermometer correction frequency level. For CP 5's chroline disinfection of green vegetables, food characteristics must be considered to suggest an appropriate number and method of cleansing. Furthermore, cooking employees are needed that properly use and manage cooling & heating equipments to maintain heated foods above $57^{\circ}C$ under the CCP 7 standard.

• Child Health Nursing Research
• /
• 제6권1호
• /
• pp.103-111
• /
• 2000

The aim of the study is to analyze and evaluate the Child Health Management Service that was promoted as a part of Mother-Child Health Guidance Project by the Public Health Center of BukCheju-gun in 1999, to reflect the problems needed to be improved, and, thus, to present the integral program model for the Child Health Management Service that guides childhood health, regarded as the foundation of that of the adulthood period, to the optimum level. The common results of the evaluation of the Child Health Management Service of BukCheju-gun public health center are as below: 1. In the aspect of public information, the existing simple material and method of public information was not effective. 2. The opportunities for the necessary training and education to develop the persons concerned and their ability for the Child Health Management were not enough.3. The environment under which the service, aimed to promote Child's health, was carried out was not clearly divided from that of the services related with the prevention and treatment of disease. And the service environment for the child health was threatening to the clients.4. Still, the actual result was pursued more than the quality management, while carrying out the project. With the reflection of the above result, the research has presented the program model of Child Health Management Program for the next. The main concept of the model is, through the establishment of the network for information offerings and effective convergence of a variety of opinions for the community around the Public Health Center and for the correct evaluation of the project and the reflection of the result from it, to achieve the ultimate goal of the optimal growth and development of the childhood by expanding the support necessary for carrying out Child Health Management Program more effectively.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권1호
• /
• pp.15-26
• /
• 2016

Based on a survey done recently in Japan, 30 percent of the serious accidents occurred in oral implant surgery were concerned with the mandibular canal and 3/4 of them were related to drilling. One of the reasons lies in the lack of the education system. To overcome this problem, a new educational system focusing on drilling the mandibular trabecular bone has been developed mainly for dental college students in the form of an oral implant surgery training simulator that enables student to sense the reaction force during drilling. On the other hand, the conventional system uses polymeric model. Based on these systems, two approaches were proposed; the evaluation by experienced clinicians using the simulator, and experimental works on the polymeric model. Focusing on the combination of the drilling force sensed and drilling speed obtained through both approaches, the results were compared. It was found that the polymeric models were much softer especially near the mandibular canal. In addition, the study gave us an insight of the understanding in bone quality through tactile sensation of the drilling force and speed. Furthermore, the clinicians positively reviewed the simulator as a valid tool.

• Journal of the Korea Convergence Society
• /
• 제11권3호
• /
• pp.19-26
• /
• 2020

In this paper, we propose a method to analyze the loss region of the dictionary-based super resolution result learned for image quality improvement and to map the learning data according to the analyzed loss region. In the conventional learned dictionary-based method, a result different from the feature configuration of the input image may be generated according to the learning image, and an unintended artifact may occur. The proposed method estimate loss information of low resolution images by analyzing the reconstructed contents to reduce inconsistent feature composition and unintended artifacts in the example-based super resolution process. By mapping the training data according to the final interpolation feature map, which improves the noise and pixel imbalance of the estimated loss information using a Gaussian-based kernel, it generates super resolution with improved noise, artifacts, and staircase compared to the existing super resolution. For the evaluation, the results of the existing super resolution generation algorithms and the proposed method are compared with the high-definition image, which is 4% better in the PSNR (Peak Signal to Noise Ratio) and 3% in the SSIM (Structural SIMilarity Index).

• Korean Journal of Construction Engineering and Management
• /
• 제16권6호
• /
• pp.73-83
• /
• 2015

Construction management firms in Korea have mainly focused on the key management areas of time, cost, quality and safety management in line with a rapid change of construction industry recently. However, a risk management is considered comparatively less important found from our research on an investment by the firms for training, system establishment. This has been identified that the construction management firms have taken an approach of dealing with risks with their experience, insight rather than managing risks with a systemized principles or proper tools. Therefore, the current system for risk management was identified by analyzing risk factors and work process in this research and systemized process for risk management of the identified risk factors was suggested. This research is expected to be a basis on establishing standard gudiance for risk management and risk management tools.

• Journal of Technologic Dentistry
• /
• 제38권4호
• /
• pp.353-363
• /
• 2016

Purpose: This study aims to assess clinical practice satisfaction among dental technology students and to identify the factors that may influence their career decision levels. In doing so, the present study provides preliminary data as to ways to improve clinical practice satisfaction levels and career decision levels that would be optimal for one's competence. Methods: he survey was conducted on dental technology students. The collected data was analyzed by the statistical program SPSS 21.0. The results were analyzed by reliability, frequency, multiple-way ANOVA, correlation, multiple regression. To test for significance on each item, p<0.05 has been decided as a standard. Results: Analysis results indicate that the factors influencing clinical practice satisfaction of dental technology students include school year, satisfaction of major, area of clinical practice, and assigned department for clinical practice, while the factors that influence career decision levels include satisfaction of major and clinical practice satisfaction. Conclusion: Results of present study suggest that in order to improve clinical practice satisfaction among dental technology students and thereby career decision levels, one needs to focus on satisfaction of major and quality of clinical practice. Such efforts will enable a more active and effective approach toward clinical practice for the dental technology students, and with appropriate understanding and assessment of the experience, they will be better equipped to make a career decision where they can live up to their competence.

• The Journal of the Korean dental association
• /
• 제47권7호
• /
• pp.435-443
• /
• 2009

The purpose of this study was to compare the centering ratio and reduction of canal curvature according to the preparation sizes of #30, #40 and #50 using three rotary NiTi instruments which have different shaft tapers. Seventy-two simulated root canals in clear resin blocks (Endo Training Bloc; Dentsply Maillefer, Ballaigues, Switzerland) were divided as following 3 groups according to the file system; the 24 canal blocks prepared with each of ProTaper Universal system (Group P), LightSpeed eXtra system (Group L), and K3 (Group K). The pre- and post-instrumented root canals were scanned and superimposed to evaluate and calculate the centering ratio and reduction of canal curvature. Mean scores of each group were statistically analyzed using one-way ANOV A and Duncan's multiple range test for post-hoc comparison. The results were as followings: 1. Group L showed better centering ratio, followed by K and P. And all experimental groups generally showed increasing tendency of centering ratio as the apical size was increasing from #30 to #50, except at 1 mm level of group P where showed reducing tendency of centering ratio. The smaller the ratio, the better the instrument remained centered in the canal. 2. Group P showed more decrease of canal curvature at all apical shaping size (p < 0.05). Under the conditions of this study, the shaft design could affect the quality of canal shaping and the smooth taperless flexible (LightSpeed) shaft design was capable of preparing canals with good morphological characteristics in curved canals.

• Journal of the Korean Institute of Navigation
• /
• 제24권1호
• /
• pp.13-22
• /
• 2000

The collisions at sea among marine casualties are not reduced as the tonnage and speed of ship's increase as well as the traffic quantity increase at sea, in spite of the improvement of nautical equipment, enforcement of crew's education and training as well as improvement of quality standard according to the implementation of ISM code. The measures to prevent the collisions at sea are simple, and are composed of six stage.: The first stage is that the officer on duty detect the target from his eye or radar information. The second stage is determining the type and kind of target-ship. The third stage is target tracking; calculation of target speed, course, CPA and TCPA from radar information or visual check. The fourth stage is determination of vessel in danger after calculation of third stage. The fifth stage is the judgement of situation if own ship is stand-on or give way vessel according to the 1972 COLREG. The last stage is to carry out proper action according to 1972 COLREG, under the circumstances. But by the case, the situations are so different under the different external conditions; for example, natural/navigational conditions, crew's human factors, ship's particular, rule or regulation, management system on board, the condition of watch keeping. Therefore the reasons and casualties are so complicated. This study aims to investigate the collision casualty at sea which needs to clarity all these causal factors of afore-mentioned, and to analyze the causes of problems so as to utilize them to establish the measures of preventing marine accidents. This study, described the concepts of causal factors into three groups; environmental factor, and company/on board management system and navigator's act. Also described how to investigate and analyzes the casual factors. Even though it was described in this paper how to detect the causal factors and reasons of collisions, and how to analyze the inter-relation of each causal factors, it is necessary to do further study how to analyze between the liability of concerned parties and the casual factors involved.