• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.32-38
• /
• 2013

This paper deals with the study on the rotordynamic and experimental analysis of turbine-generator system connected with a magnetic coupling. Although magnetic coupling has been used to torque transmission of chemical processing pump rotating at under 3,600rpm, magnetic coupling in this study is applied to high-speed turbine-generator system using a working fluid that is refrigerant such as ammonia or R-124a. Results of rotordynamic design analysis are as follows. The first, shaft diameter nearest to outer hub of magnetic coupling has a big effect on the $1^{st}$ critical speed of generator rotor. The second, if the $1^{st}$ critical speeds of turbine rotor and generator rotor have enough to separation margin in comparison to rated speed, the $1^{st}$ critical speed of turbine-magnetic coupling-generator rotor train has enough to separation margin regardless of connection stiffness of magnetic coupling. The analytical FE model is guaranteed by impact test on the prototype and condition monitoring such as measurements of vibration and bearing temperature is also performed.

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.369-377
• /
• 2004

Recently, the "ride comfort" problem becomes increasingly important because of today's needs for train speedup. The concept of term "ride comfort" is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But each of them recommends the different assessment method and the different guidance. In general, the evaluation methods defined in the standards, such as ISO 2631 and UIC 513R, and Ride Index suggested by Sperling, have been used in the railroad. But, only one or two methods of these can be evaluated by using the commercial ride comfort measuring system. Therefore, it is necessary to develop the new ride comfort measuring system for railway with multi-function. In this paper, the generalization of "ride comfort" and the design and verification of new ride comfort measuring system for railway with multi-function have been described and the application examples has been introduced.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.354-360
• /
• 2005

The railway track and the substructures constructed in the field test section of Kyongbu High Speed Line are the structures for HSL, for the first time designed and constructed by domestic technical group. It is very important to verify the local design criteria and specifications for these structures and also to assure the recordings for vibration or deflection produced on the essential parts of the structures. The study to verify the high-speed railway track performance and to ensure the run in safety on the track in curved section during the KTX run. Finally, the conclusion are drawn as follows. The measuring values of the deflection effort of the rail and displacement for verifying the track performance in the field test section of Kyoungbu HSL satisfy the criteria of the foreign countries (Japan and Germany). The measured value for the wheel load and the presumed value show the consistent tendency. The wheel loads of the exterior and interior of the rails at the speed superior to 300km/h are measured same. Finally, the comparison between the theoretical value presented during the verification of the derailment to evaluate the safety of the train run at the time of the detailed design of the track and the measured value in the field shows that the correct design of track structure was applied.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.6-10
• /
• 2005

With the rapid industrial development, railways have become a main traffic means of transportation. However, rail traffic noise and vibration have become a major problem in urban areas which is a very serious issue for the living environment. Especially, railway noise induced by rail operations has influenced on the residents living near railway tracks. The purpose of this paper is to investigate the Raynoise modeling in railway applications. Generally, my acoustics have been used to investigate the effectiveness of noise barriers in railway applications and barriers are modeled using the commercial software Raynoise. A-weighted sound pressure level have been measured at six locations, 4m from the track and are compared with experimental values. Based on the analysis of the results, Comparison between numerical and experimental values are within 1dB (A). Also, when a train is m through the Raynoise modeling, the general influential sphere of railway noise can be determined. Therefore, this study will be using basic data in establishing effective railway noise prevention plans far the future. Also, we could know that is applicable of Raynoise modeling at railway noise.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.948-953
• /
• 2015

In this paper, we studied the environmental requirements for the railway transponder system. The transponder system is comprised of a reader installed beneath the train, a tag installed on the track, and a portable programmer. Among them, the transponder tag should be designed to withstand harsh environments, such as wide operating temperature range, mechanical shock and vibration, etc. To validate stable and reliable service under railway conditions, we carried out environmental test for transponder tag. We then installed the tags on the Honam high-speed test line.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.565-575
• /
• 1995

Gearboxes are often used in the petrochemical and electrical power plants to transmit mechanical power between two branches of a machinery train rotating at different speeds. When the gearboxes are connected with rotors supported by journal bearings, bearing loads vary in magnitude and direction with rotor speed and torque transmitted by the gearboxes. In this study, dynamic characteristics of the system which consists of gearboxes and a rotor supported by journal bearings are investigated analytically and experimentally by employing the polynomial transfer matrix method and modal analysis under different speeds and torque levels. Journal bearing loads due to the transmitted torque are claculated analytically and the stiffness and damping coefficient of the journal bearings are obtained using finite element method. Comparison of the analytical and experimental results shows that the cross coupled stiffness coefficients increase with increasing rotor speed, while the cross coupled damping coefficients decrease. This generates the oil whirl instability in the journal bearings. As the transmitted torque level goes up, the stiffness coefficients of the journal bearing and the first horizontal natural frequency increase. High levels of the transmitted torque produce high bearing stiffness since the contact loads of the mating gear teeth increase. The logarithmic decrement, which is a stability indicator, is shown to decrease with increasing speed and decreasing torque. Thus, at the low torque level, the system become unstable even at the low shaft speed.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3081-3083
• /
• 2005

한국형 고속전철차량의 자동제어 구현을 위해서 우선 다양한 종류의 장치들로부터 상태정보(Line Voltage-열차가선전압, Bogie Hunting, Preset Speed, PWM, Train Velocity, Brake Pressure, Reservoir Pressure)를 취득해야하며, Main Process Unit(MPU)에서의 고속 Data 처리를 위해서 취득한 Analog Data를 신속하게 Digital Data로 변환해야 한다. 또한 열차내의 특수한 조건(Noise, Vibration)에서도 안정적인 데이터의 취득을 만족시켜야한다. 이와 같은 상황을 고려한 독자적이 통합형 데이터 취득 장치 -Integrated Data Acquisition Board(IDAB)-의 설계방안을 제시하였다.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.589-594
• /
• 2004

In design of suspension system for KHST, it was applied the approximated optimization method using meta-models which called Response Surface Model and Neural Network Model for 29 design variables and 46 performance index. These models was coded using correlation between design variables and performance indices that is made by the 66 times iterative execution through the design of experimental table consisted orthogonal array L32 and D-Optimal design table. The results show that the optimization process is very efficient and simply applicable for complex mechanical system such as railway vehicle system. Also it was compared with the sensitivity of some design variables in order to know the characteristics of two models. This paper describes the general method for dynamic analysis and design process of railway vehicle system applied to KHST development, and proposed the efficient methods for vibration mode analysis process dealing with test data and the function based approximation method using meta-model applicable for a complex mechanical system. This method will be able to apply to the other railway vehicle system in oder to systematize and generalize the design process of railway vehicle dynamic system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.6
• /
• pp.279-289
• /
• 2014

Considering a rigorously fluid-structure interaction, a method for an earthquake response analysis of a floating offshore structure subjected to vertical ground motion from a seaquake is developed. Mass, damping, stiffness, and hydrostatic stiffness matrices of the floating offshore structure are obtained from a finite-element model. The sea water is assumed to be a compressible, nonviscous, ideal fluid. Hydrodynamic pressure, which is applied to the structure, from the sea water is assessed using its finite elements and transmitting boundary. Considering the fluid-structure interaction, added mass and force from the hydrodynamic pressure is obtained, which will be combined with the numerical model for the structure. Hydrodynamic pressure in a free field subjected to vertical ground motion and due to harmonic vibration of a floating massless rigid circular plate are calculated and compared with analytical solutions for verification. Using the developed method, the earthquake responses of a floating offshore structure subjected to a vertical ground motion from the seaquake is obtained. It is concluded that the earthquake responses of a floating offshore structure to vertical ground motion is severely influenced by the compressibility of sea water.

• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.1-18
• /
• 2015

Traditionally, it is not easy to carry out tests to identify modal parameters from existing railway bridges because of the testing conditions and complicated nature of civil structures. A six year (2007-2012) research program was conducted to monitor a group of 25 railway bridges. One of the tasks was to devise guidelines for identifying their modal parameters. This paper presents the experience acquired from such identification. The modal analysis of four representative bridges of this group is reported, which include B5, B15, B20 and B58A, crossing the Caraj$\acute{a}$s railway in northern Brazil using three different excitations sources: drop weight, free vibration after train passage, and ambient conditions. To extract the dynamic parameters from the recorded data, Stochastic Subspace Identification and Frequency Domain Decomposition methods were used. Finite-element models were constructed to facilitate the dynamic measurements. The results show good agreement between the measured and computed natural frequencies and mode shapes. The findings provide some guidelines on methods of excitation, record length of time, methods of modal analysis including the use of projected channel and harmonic detection, helping researchers and maintenance teams obtain good dynamic characteristics from measurement data.