• 소음진동
• /
• 제10권4호
• /
• pp.636-641
• /
• 2000

KHST(Korea High Speed Train) project plans to design and to build an high speed train. There are noise requirements in passenger room for the standing and running condition, which should be reached. Predicted noise calculated for the standing and running TM5(Motorized car) and TT4(Trailer car) train (v=300 km/h and v=350 km/h) to find out critical areas in or around the train. From the estimation in DWA IfS, actions of noise reduction are proposed to reach the requirements. This paper takes the review of the calculated results in DWA IfS to propose a new design of inner wall.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.513-518
• /
• 2003

Noises are defined as unwanted sound and invoke the physical harm and unconvenience. The higher the noise level is, the more damage peoples have. Low frequency noise is less harmful than high frequency one. In case of train, noises inside of train which is isolated from outer circumstances reduce the convenience of passenger very much. This paper reviewed the noise standard of train for urban subway and investigated the main transformer as the main noise source of train and suggested the method to diminish the noise resulted from main transformer of train and compared the measured results of before and after the improvement of main transformer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.783-788
• /
• 2004

Recently, Statistical Energy Analysis(SEA) is being increasingly applied to describe vibro-acoustic behavior of complex structures, such as air plane, automobile, ship, building. In this paper, we discuss the application of SEA to predict the interior noise for KTX train. To validate the SEA model of KTX train, calculated the interior noise for motorized car is compared to measured one. Finally, the reduction measures of interior noise for KTX are also discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.629-634
• /
• 2001

The construction of the elevated railway has led to concerns about the noise from trains, particularly as tracks often pass close to residential dwellings. One specific issue relates to the noise from trains on bridges. The wayside noise for the train was measured to get the basic data that can be used to prepare count measures for solving environmental noise problems. Noise levels were measured simultaneously at three points in various distances from the railroad and at four points classified by floor. In this paper we measure the wayside noise in elevated railway and noise of normal operation compare with operating under train engine idling condition and investigate effect of nearby-building induced by train operation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1360-1366
• /
• 2000

KHST project plans to design and to build an high speed train. There are noise requirements in passenger room for the standing and running train, which should be reached. Noise prognosises are calculated for the standing and running TM5(Motorized car) and TT4(Trailer car) train (v=300km/h) to find out critical areas in or around the train. On those areas, actions of noise reduction are proposed to reach the requirements. Finally noise prognosises are calculated for the higher velocity of v=350km/h.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.431-437
• /
• 2013

Measured acoustic signal from operating high speed train contains frequency change called doppler shift due to its motion. To avoid this doppler shift wind tunnel test is required. But scaledown of model can cause change of source characteristics. And measurements using some part of train cannot reproduce real flow condition. The best way to recognize real noise source characteristics is measurement from operating high speed train but doppler shift makes it hard. So, we developed simple dedopplerization technique for one microphone and applied to field test data of high speed train. Through this, we could capture real frequency of noise from operating high speed train.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1134-1139
• /
• 2007

In recent years, public complaints about railroad noise by KTX and Ordinary train are increasing. Restriction of railways uses same standard without distinguishing the type of railways. According to the type of railways, the frequency characteristics of emitting noise is different. Therefore it is requested to know how vary the public response to each types of railway. The noise annoyance to three types of trains (KTX, Electric train, Diesel train) was analyzed by Jury Evaluation Test for assessing the effect of frequency characteristics. The numerical results by a Semantic Differential Method showed that annoyance response to three type of trains depended on the frequency characteristics. As a result, this study proposed that the KTX could have a bonus level of maximum 2.9dB(A) to ordinary train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.249-256
• /
• 1998

Design target values of transmission loss in a high-speed train wall are suggested by calculating the difference between interior and exterior noise levels of it. Exterior noise level distribution on the boundary of train wall is calculated by Sysnoise, with sound source input prepared by experiments. Two kinds of exterior sound sources are considered, the rolling noise of train wheels on the rail and the aerodynamic noise from the pantograph. Interior noise level is provided by high-speed design target. Transmission loss characteristics according to the frequency band are examined.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.69-72
• /
• 2007

In this paper, we describe the analysis of interior noise for tilting train that is being developed in Korea. Tilting train is made of composite material to reduce the car body's weight and attached a self-steering system on bogie to improve curving performance. However, the acoustic performance (Transmission Loss) of such material is worse than the materials of conventional train, such as aluminum, steel and so on. Therefore, we measure the transmission loss of side wall / floor of tiling train and predict the interior noise for tilting train using its measuring results

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.