• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.825-830
• /
• 2005

Traffic control is the center of the railway traffic control system. The main objective of railway traffic control system is to minimize delays, providing the customers with on-time train operating service according to the given train schedule. Particularly, within the station control area, the departure & arrival of train. the decision on the train priority and the shunting of train are decided by the authority of the local traffic controller. Therefore, it is necessary to have a lot of information and communications between each departments. And for such decision making of the local traffic controller, not only the communication between each stations are needed, but also the communication between other stations are needed too. In this paper, we have analyzed the main work of the local traffic controller in large scale stations and have designed the station traffic control system needed to be built within the station considering the local traffic. And we have proposed not only the communication with other system within station, but also the communication methods for communications with the neighboring stations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.236-246
• /
• 2003

This paper is implemented a control algorithm in order to be stable and minimized to entire train traffic system at delayed case. Signal ing system is described wi th algebraic equations given for train headway, Discrete-event simulation principles are reviewed and a demonstration block signaling model using the technique is implemented. Train congestion at station entrance for short headway operation is demonstrated and the propagation of delays along a platform of trains from any imposed delay to the leading train is also shown. A rail way signaling system is by nature a distributed operation with event triggered at discrete intervals. Although the train kinematic variables of position, velocity, and acceleration are continually changing, the changes are triggered when the trains pass over section boundaries and arrive at signals and route switches. This paper deals with linear-mode1ing, stability and optimal control for the traffic on such metro line of the model is reconstructed in order to adapt the circuits. This paper propose optimal control laws wi th state feedback ensuring the stability of the modeled system for circuits. Simulation results show the benefit to be expected from an efficient traffic control. The main results are summarized as follows: 1. In this paper we develop a linear model describing the traffic for both loop lines, two state space equations have been analyzed. The first one is adapted to the situation where a complete nominal time schedule is available while second one is adapted when only the nominal time interval between trains is known, in both cases we show the unstability of the traffic when the proceeding train is delayed following properties, - They are easily implemented at law cost on existing lines. - They ensure the exponetial stability of loop system. 2. These control laws have been tested on a traffic simulation software taking into the non-linearites and the physical constraints on a metro line. By means of simulation, the efficiency of the proposed optimal control laws are shown.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.1-17
• /
• 2021

대부분의 도시철도 시스템은 승객의 탑승열차 및 탑승열차종을 정확히 알 수 없다. 다수의 선행연구에서는 교통카드데이터와 열차시각표를 매칭하여 탑승열차를 추정하였으나, 추정이 불가능한 승객 또한 다수 존재한다. 본 연구의 9호선 사례분석 결과 교통카드데이터-열차시각표 매칭만으로는 약 28% 승객의 탑승열차종을 추정할 수 없음을 확인할 수 있었다. 이에 교통카드데이터-열차시각표 매칭과 본 연구에서 정의한 통행시간 기반 혼합확률분포분석을 순차적으로 적용하여 급행운영 도시철도노선 승객의 탑승열차종을 추정하는 방법을 개발하였다. 분석 결과, 298개 OD pair에서 본 연구의 검증 기준을 만족하는 합리적인 급행이용/비이용 승객 분류기준점을 도출할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.140-144
• /
• 2011

As a result of that the domestic railway technology has been progressed as times go by, the 1st and the 2nd steps for Gyeongbu HSR at the speed of more than 300km/h, were completed and Honam HSR - its operational speed is 350km/h - is under construction. Additionally, As a part of the expressization project for general lines, the Seoul-Chuncheon route at the speed of more than 180[km/h] is under construction and the Jeolla route is under design. At present, 11 countries (e.g. France, Germany, Belgium, Italy, the Netherlands, Spain, England, Japan, China and Taiwan) including Korea have high speed railways operated at the speed of more than 300[km/h]. As shown in the above, the domestic railway has high speed trains as good as those of countries outside Korea, but the schedule speed, which is calculated by dividing distance to destination by time, is lower than that of overseas trains. For overseas railway, the ratio of schedule speed to the highest speed is above 65%, while that of domestic railways is over 50%. It shows a significant difference between them. It is expected that the schedule speed improvement will increase the number of train operation and line capacities than now, so it shall achieve smooth transportation flow and improve the passengers' satisfaction. In this paper we describe the necessity for the improvement of schedule speed, by analyzing foreign cases related to the improvement of schedule speed in order to satisfy the increasing traffic demand.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.269-276
• /
• 2011

This paper considers the rail crane scheduling problem with minimizing the sum of the range of order completion time and make-span of rail crane simultaneously. The range of order completion time implies the difference between the maximum of completion time and minimum of start time. Make-span refers to the time when all the tasks are completed. At a rail terminal, logistics companies wish to concentrate on their task of loading and unloading container on/from rail freight train at a time in order to increase the efficiency of their equipment such as reach stacker. In other words, they want to reduce the range of their order completion time. As a part of efforts to meet the needs, the crane schedule is rearranged based on worker's experience. We formulate the problem as a mixed integer program. To validate the effectiveness of the model, computational experiments were conducted using a set of data randomly generated.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.459-469
• /
• 2009

It is well known that coagulation pretreatment can reduce foulants prior to membrane filtration. The purpose of this research was to investigate the effects of coagulation on fouling of ceramic microfiltration membrane($0.1 {\mu}m$) using pilot plant of $150m^3/day/train$ capacity. Train A membrane system has pretreatment process of ozonation and coagulation while train B has only coagulation. Two types of coagulation operation were investigated: back mixer(rapid mixing with or without slow mixing) which is a conventional mechanically stirred mixer and an inline static mixer. Ozone dose rate for train A was 1 mg/L and ozone contact time was 12 min. The coagulation dose(PACl 10% as $Al_2O_3$) rate was changed 20~40 mg/L according to experimental schedule. In this experimental conditions, the coagulation of back mixer type with rapid mixing(GT=72,000) and slow mixing(GT=45,000) was the best effective in reduction of ceramic membrane fouling regardless preozonation. Especially, the effect of inline static mixer was sensitive to change in water quality. Ozonation mainly affected irreversible fouling rather than reversible fouling in accordance with less adsorption of NOM on the membrane surface. Thus, the increase rate of the nomalized TMP(trans membrane pressure) at $25^{\circ}C$ for train A was relatively lower than that of train B under same coagulation process with same coagulant dosage. The best performance of ceramic membrane appeared in case of combined process with ozonation, therefore this integrated process is able to archive less coagulant dosing and secure a stability of ceramic membrane system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1731-1737
• /
• 2007

차량운용문제 혹은 열차반복문제는 수송계획, 열차운행계획에서 작성된 열차운행시각에 기초하여 편성유형 또는 차종에 따라 주어진 제약조건(선회조건, 검수조건, 기지복귀조건 등)을 반영하여 최적의 차량운용 다이아, 운용순서를 구성하는 문제이다. 일반적으로 이 문제는 집합분할(Set Partition)문제로 모델링하여 열생성(Column Generation) 기법을 사용하여 제약조건에 맞는 운용을 생성하였다. 하지만, 본 연구에서는 지하철과 같이 열차운행의 빈도는 높고 물리적 네트웍은 간단하며 시종착역의 수가 적을 경우 많은 대안 경로(Alternative Routing)들이 생성되는 특징 및 일반 철도와는 다른 역에서의 공간적 제약에 따른 차량 선회 제약을 고려하여 차량운용수를 최소화할 수 있는 지하철 차량운용 문제에 대한 수학적인 모델을 제시하고자 한다. 먼저, 차량선회제약만을 고려하여 최소비용 흐름 모형으로 네트워크 모형을 구성하였다. 최소비용 흐름 모형을 결과로 생성된 운용을 바탕으로 각 운용의 운행거리를 정규화(Normalize)하는 휴리스틱 기법을 제안하였다. 또한, 이 방법론을 실제와 유사한 지하철 열차 스케줄에 적용하였고 약 14%의 차량소요 감소 및 최대 영업거리 약 11%, 표준영업거리편차 약 5% 감소를 통하여 본 연구결과의 유용성을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1275-1281
• /
• 2011

Most of the railway traffic control systems are using in the DBMS(Database Management System)is a disk-based DBMS. When the train schedule and the event data is inputted and referred at real time on Disk-based DBMS, it is characteristic of the slow access time and the data is preserved permanently. For this reason, this paper suggests the way of improving for Railway Traffic Control System by the hybrid DBMS using a combination of memory and disk. We apply the Hybrid DBMS to Railway Traffic Control System and compare the existing method with suggested one using the same data. As a result of comparison, we have come to the conclusion that suggested method is far more performance to shorten data access time and process a mass information than the previous methods.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.555-563
• /
• 2016

선로용량은 수요에 부합되는 최대열차횟수를 결정하고 수송력 증대에 필요한 투자우선순위 판단을 위한 중요한 척도이다. 특히 2016년 중반부터 고속철도노선에 두 철도운영자가 운송사업을 개시함에 따라 선로용량과 실제배정 가능한 최대열차횟수 간에 상충이 발생하지 않고 유효운송경쟁이 보증될 수 있도록 선로용량을 산정 관리할 필요성이 있다. 열차종별 운행횟수, 도중정차패턴과 착발시각, 운행시간, 열차의 대피 또는 교행, 열차간의 안전시격 등에 따라 선로용량이 크게 달라지므로 현재까지도 실제 적용에 많은 논쟁이 있는 것도 사실이다. 이러한 문제점을 극복하고자 철도운영자의 운송정책을 고려한 열차운행 스케쥴을 반영할 수 있는 시뮬레이션 기법에 의한 선로용량 산정방법을 제시하고자 한다.