• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.50-55
• /
• 2018

압출기술에서 중요한 것은 금형의 설계 및 제작이며, 원하는 형태의 압출이 원활히 이루어지는 동시에 금형의 수명을 최대한 연장하고 효율성을 높이기 위한 금형의 설계가 필수적이다. 압출 온도, 압출 속도 등이 압출시의 주된 변수이며, 압출비 및 재료의 물성, 압출 형태에 따라 각기 다른 조건이 부가되어야 한다. 본 연구에서는 고속전철 내외장재 부품용 알루미늄 6xxx 계열 주조 합금의 압출공정에 대해 연구하였다. 6063, 6061, 6N01, 6005, 5083 and 6060 알루미늄 합금의 압출 금형 단면을 설계하였으며 이에 대한 실험을 실시하였다. 또한, 빌렛온도, 압출온도 및 재료의 변화에 따른 압출 압력과 같은 압출 조건들을 분석하였다. 6063 알루미늄 합금이 가장 낮은 온도와 압력에서 압출이 가능한 반면 6061 합금은 가장 높은 온도와 압력에서 압출이 가능하였다. 이들 실험결과로부터 수립된 조건들을 이용하여 성공적인 압출제품을 제조할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.643-652
• /
• 2007

This study identifies visible/invisible factors and analyzes facilities, structure, and visible perceptive contents in the aspects of operation and efficiency with a focus on the interfaces between interior design of the subway and users. More specifically, it diagnoses the requirements and empirically presents improvements. In addition, this study aims to diagnose the interfaces between trains and users by reinterpreting and evaluating factors from the perspectives of users, and to elicit the universal interface and an objective form of conceptual, structural, and formative relations in regard to the conditions required to the design. As the interior design in the subway trains is for the public reflecting the value, consciousness, and behaviors of users, it should be approached through the application of the concept of universal design that considers the potential needs and psychological satisfaction of users. In arranging the indoor of the vehicles, the conditions for the facilities should be specified through the interdisciplinary approach from professional fields including ergonomics and psychology, the path of flow should be induced through the use of space and the analysis of passengers' behaviors, an integrated planning should be re-established, and continuous evaluations of basic guidelines, manuals, and requirements should be made.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1776-1781
• /
• 2008

To reduce interior noise of running vehicles, a floating floor construction has been widely used in recent railway industry. Among the key factors of the floating floor design, dynamic stiffness is of most important in acoustical point of view. Sometimes hard rubber type supports have often been selected due to the other design constraints such as heavy load condition, durability of rubber element and its cost etc., even though it seems like the softer support, the better isolation of noise and vibration. In this paper two representative floor supports have been considered to evaluate their effectiveness in interior noise contribution: one is a soft rubber and another is a relatively hard one. From the measured dynamic stiffness of the specimens, equivalent stiffness of actual floating floor has been derived to use in the analytical models. Calculated air-borne and structure-borne noise insulation properties of the floating floors have been compared with experiments in prototype car. In full car model interior noise levels of running vehicles have been predicted to quantify the effectiveness of the two different floating support materials and verified through the measured inside noise levels of actual train as well. By comparison with difference of running noise levels two materials for floor support can be investigated quantitatively so that it could be applied in floating floor design.

• 한국가구학회지
• /
• 제26권1호
• /
• pp.61-70
• /
• 2015

There is an increasing trend each year in the number of subway users due to increase in the traffic volume. As the number of train service has risen, the subway drivers are given heavy work and from the same, are put at risk of mental health deterioration due to stress. As this is directly connected to safety, there is an urgent need for improvement of the situation. Therefore, as a way to appropriately relieve such stress, resting space where mental and physical energy can be recharged is necessary. Thus, this research conducted a survey of demand with subway drivers as subjects in order to provide resting space that can offer healthy rest and increase work effectiveness. 50 subway drivers were the subjects of this survey. As a result of analyzing the contents of the survey, environmental satisfaction was shown to be the lowest compared to psychological and morphological satisfaction. In the case of sleeping room, they wanted more comfortable and individual space. And the waiting room had the highest rate of usage frequency. The storage space was where the subway drivers showed the strongest attachment and was shown to be the only personal space. Most were shown to be satisfied with the outdoor space, but it had the lowest usage frequency. In addition, it is nessasery customized storage cabinet designed for subway drivers should be produced, which can effectively arrange the limited space. I hope that these direction of improvement can increase the healthy rest and work effectiveness of the locomotive engineers as it is directly being connected to the health and safety of the citizens.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.65-68
• /
• 2006

Experiments were performed to investigate the effects of mud-flap width on the aeroacoustic noise generation inside high-speed trains. The open-circuit type wind tunnel was used. The measurement setup was custom-built to simulate intercoach spacing. From the measurements, the characteristics of the turbulent flow after the intercoach spacing and consequent generation of aeroacoustic noise inside the cabin was investigated. Especially the effects of mud flap length on the characteristics of the characteristics of the turbulent flow were identified. The mechanism of noise generation by analyzed interactions with structure vibration characteristics and generation characteristics of blocked pressure was investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.165-170
• /
• 2010

Recently, Interior Permanent Magnet Machine(IPM) is widely used for traction motor in the high speed train. Higher efficiency and power density are the superb performance of IPM. Due to the high power density, however, it has lots of heat source which are originated from copper losses and core losses. These heat source can cause the permanent demagnetization in magnet and the loss of torque and power. To prevent the undesirable loss in the traction motor, the accurate loss calculation and the thermal analysis should be preceded. Especially, the end-winding area and permanent magnet area should be examined correctly. In this paper, the electromagnetic fields were examined by finite element method to analyze the electromagnetic properties of IPM and thermal analysis are carried out with pre-calculated losses. To validate the analysis result, the experiment set with forced air cooling system is manufactured.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1243-1248
• /
• 2009

This paper introduces the methode to improve the indoor air quality for Korea Tilting train express(TTX). TTX operates more than 80,000km in commercial line and in the near future service is expected. To improve air quality effective heat and cooling system is proposed. Also according to the ministry of environment guide line, major factor component are selected to Co2(carbon dioxide) and Pm10(particle matter). The database of the vital factor was accumulated by the various case of operation environment. Finally, optimal air condition controling device is developed and installed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1016-1020
• /
• 2005

The real-time monitoring and controlling between the interior and the field signaling security devices is a necessity for the train safety in terms of the train operating plan. The type wiring lower the safety level of signaling security device, because too much wiring makes the maintenance more difficult and it might be have a problem of an induction field and contact. It also need high cost. The single network communication(Fieldbus) does not need that much wiring, and the maintenance will be easier. It also guarantee the high level of stability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.358-362
• /
• 2003

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of HVAC(Heating, Ventilating and Air-Conditioning} for double-deck train. The HVAC system is installed under the roof of carbody. In the lay-out of HVAC system, air duct must be installed to supply air to 1st and 2nd floor respectively. The standard k-epsilon turbulent models and SIMPLEC algorithm based on finite volume method are used to solve the physical HVAC model. To assure convergence, QUICK scheme for momentum equation and the first order upwind scheme for turbulent equations are used. From the results of simulation, the temperature and velocity magnitude are also distributed uniformly in the interior of passenger car.

• 산업기술연구
• /
• 제31권A호
• /
• pp.33-38
• /
• 2011

In an express tilting train, side wall insulating the noise from the exterior sound source consists of two parts. One is the layered composite panel including aluminum honeycomb, glass wool and nomex honeycomb. The other is the double glazed window. In this study, sound insulation performance of the two parts is investigated by mass law and experiment. Based on ASTM E2249-02, the intensity sound transmission loss (TL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance in respect of weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy for the interior noise reduction is investigated.