• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.937-945
• /
• 2022

자율운항선박(MASS : Maritime Autonomous Surface Ships)은, 고도의 자율도를 가지고, 계획된 경로를 따라 자율 운항하지만, 필요시 육상원격제어센터(SRCC : Shore Remote Control Center)에서 선박의 운항에 직접 개입할 수 있다. 본 연구에서는 이러한 자율운항선박의 운항을 육상에서 모니터링하고 유사시 원격제어하는 역할을 담당할 육상원격제어사(SRCO : Shore Remote Control Officer)의 교육훈련에 필요한 시뮬레이터 시스템의 운용개념과 이를 가능하게 하기 위한 요구기능에 대해 검토하였다. 육상원격제어 시뮬레이터 시스템은, 다수의 자율운항선박의 운항상황을 모니터링하는 Monitoring Station, 유사시 특정 선박의 운항에 직접 원격개입하는 Control Station의 기능을 모의하도록 하였고, 시뮬레이션 종합통제실, 자율운항선박 운항상황 모의 시뮬레이터, 그리고 주변의 유인선 운항을 모의하기 위한 통항선 시뮬레이터 등으로 구성하였다. 기능적으로는, 육상에서 선박을 직접 제어하기 위하여 원격으로 개입하는 ESRC(Emergency Situation for Remote Control) 상황을 정의하여 이러한 상황을 모의할 수 있도록 하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.236-239
• /
• 2011

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$(TC IIa) which is a trade name of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$(TC IIa) has been designed in consideration of high Reliability, Availability, Maintainability and Serviceability (RAMS) and low cost of electricity (CDE) for the TC IIa condition based on GL guideline. An integrated drive-train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in partial load operation and grid-friendly system for both 50 Hz and 60 Hz. A pitch-regulated variable speed control system has been introduced to control wind turbine power while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.1107-1127
• /
• 2016

Studies on dynamic characteristics of the hanger vibration using field monitoring data are important for the design and evaluation of high-speed railway truss arch bridges. This paper presents an analysis of the hanger's dynamic displacement responses based on field monitoring of Dashengguan Yangtze River Bridge, which is a high-speed railway truss arch bridge with the longest span throughout the world. The three vibration parameters, i.e., dynamic displacement amplitude, dynamic load factor and vibration amplitude, are selected to investigate the hanger's vibration characteristics in each railway load case including the probability statistical characteristics and coupled vibration characteristics. The influences of carriageway and carriage number on the hanger's vibration characteristics are further investigated. The results indicate that: (1) All the eight railway load cases can be successfully identified according to the relationship of responses from strain sensors and accelerometers in the structural health monitoring system. (2) The hanger's three vibration parameters in each load case in the longitudinal and transverse directions have obvious probabilistic characteristics. However, they fall into different distribution functions. (3) There is good correlation between the hanger's longitudinal/transverse dynamic displacement and the main girder's transverse dynamic displacement in each load case, and their relationships are shown in the hysteresis curves. (4) Influences of the carriageway and carriage number on the hanger's three parameters are different in both longitudinal and transverse directions; while the influence on any of the three parameters presents an obvious statistical trend. The present paper lays a good foundation for the further analysis of train-induced hanger vibration and control.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.360-367
• /
• 2000

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a Driving control module, including brake control module, and present a design method and a simulation method for that module.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3226-3236
• /
• 2011

In this paper, with the background features on which measuring the transverse left-right and up -down vibration of wheel, bogie and body by wireless measurement system, performance evaluation systems which can assess the running behavior of high speed trains based on UIC code 518-OR and evaluate the ride comfort of them based on ISO code 2631 and UIC code 513 were developed. The characteristics of dynamic vibration are generally analyzed by an acceleration of a car body of high speed train and the acceleration can be applied to evaluation of running safety. In this paper, also matching system of distance from tachometer and vibration from accelerometer was programmed in development software, and the SD card embedded system which prevent to loss of data in wireless measurement was mounted on this system. Finally the software perform to analysis with filtering and statistical post-process in the unit sections and zones and focus on developing the capability monitoring in the main control center. For the verification of this system, the running behavior and safety factor were analyzed based on field measured data of the Cheonjun-gunnum-sun turn out point in the new KTX railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.259-266
• /
• 1999

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a door control module, present a design method and a simulation method for that module.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.302-309
• /
• 1999

This paper is intended to provide a method to design control software fur the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. the control software has modular design and each module is tested with SCADE simulator. This time we focus a HVAC(heater, ventilation and air conditioner controller) control module, present a design method and a simulation method for that module.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권1호
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.400-402
• /
• 2019

철도 레일의 선로 변경을 위해 사용되는 분기기의 제어를 담당하는 전기선로전환기는 철도시스템 중에서 매우 중요하게 관리되고 있다. 선로전환기의 상태를 확인하기 위해 다양한 유무선 실시간 모니터링 시스템이 사용되고 있으나 센서 또는 네트워크 오류 등으로 인한 오작동 가능성이 존재하고 있다. 본 논문에서는 선로전환기 작동상태를 이중으로 확인하기 위하여 선로전환감시시스템과 CCTV카메라 관제 시스템이 통합된 이중화 감시시스템을 설계하였다. 선로전환감시시스템에서는 전로전환기의 작동상태를 감시, 경보 그리고 네트워크를 통해 전송한다. 그리고 이 정보를 전달받은 CCTV카메라 관제시스템에서는 해당 선로전환기와 분기기의 상태를 촬영하여 관리자에게 전송하도록 하였다. 선로 관리자는 선로전환기용 모니터링 화면을 통해 선로 전환상태를 1차적으로 확인하고 이어서 CCTV카메라 영상을 통해 전환상태를 직접 확인함으로써 선로전환기의 작동에 대한 신뢰성을 향상 시킬 수 있다. 또한 관리를 위한 인력 운용을 안전하고 효율적으로 수행할 수 있게 된다. 이를 통해 선로전환기의 오작동으로 인해 선로 분기기에서 발생되는 선로 이탈사고 예방에 기여될 것으로 기대된다.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.67-72
• /
• 2021

To ensure the safety and functionality of a railroad bridge, maintaining the integrity of the bridge via continuous structural health monitoring is important. However, most structural integrity monitoring methods proposed to date are based on modal responses which require the extracting process and have limited availability. In this paper, the applicability of the existing damage identification method based on free-vibration reponses to time-domain deflection shapes due to moving train load is investigated. Since the proposed method directly utilizes the time-domain responses of the structure due to the moving vehicles, the extracting process for modal responses can be avoided, and the applicability of structural health evaluation can be enhanced. The feasibility of the presented method is verified via a numerical example of a simple plate girder bridge.