• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1266-1268
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU (Electrical Multiple Unit) and TCMS (Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) mathod, which is the layer 2 DDLM(Direct Data Link Mapper) protocol of ProfiBus.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2147-2150
• /
• 2003

Recently, many technologies of the P.L.C (Power Line Carrier) are introduced for an efficient communication. P.L.C communication sends information in the carrier signals by conduction over the power wire. An arc detector is proposed in this paper for the effective transmission. The Power Line Carrier has an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the P.L.C. is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of the arc detector system using P.L.C in railway. The proposed system can be applied for monitoring the arc detector system and the arc locator system in railway. Hence the system will be able to exchange the arc information to be T.C.M.S. (Train Control Management System), bogies and even between a station and trains in railway and use to suspicion fire in train.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.671-673
• /
• 1999

In order to cope with the occurrence of abnormal operation, rotatory condition monitoring system for guide roller of finishing train in wire rolling has been developed. In this study, proximity sensor and its holding devices that could overcome severe in-situ measurement conditions was designed and MMI software using C++ was programmed. Performance of the developed system turned out to be good enough as results of in-line test for POSCO #3 wire rolling mill. It is expected to contribute to prevent the cobble and the grade-down of products caused by the abnornormal operation of guide rollers.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1871-1879
• /
• 2008

A few years ago, The trains had little control equipment so the trains had little data transmission between control equipment. Recently, there is a lot of control equipment in a train as traction control, air conditioners and even internet access. for this reason, vehicle network must allow for the big amount of transmission data and must ensure the high reliability. In this paper we present monitering system for verify high reliability of data transmission of MVB of TCN which is an international standard of IEC 61375.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.484-486
• /
• 2005

Passenger safety is a primary concern of railway system but, it has been urgent issue that dozens of people are killed every year when they falloff from train platforms. Recently, advancements in IT have enabled applying vision sensors to railway environments, such as CCTV and stereo camera sensors. In this paper, we propose a stereoscopic video coding scheme for subway accident monitoring system. The proposed scheme is designed for providing flexible video among various displays, such as control center, station employees and train driver. We uses MPEG-2 standard for coding the left-view sequence and IBMDC for predicting the P- and B-types of frames of the right-view sequence. IBMDC predicts matching block by interpolating both motion and disparity predicted macroblocks. To provide efficient stereoscopic video service. we define both temporally and spatially scalable layers for each eye's-view by using the concept of Spatio-Temporal scalability. According to the experimental results. we expect the proposed functionalities will play a key role in establishing highly flexible stereoscopic video codec for ubiquitous display environment where devices and network connections are heterogeneous.

• Journal of the Korea Society for Simulation
• /
• v.23 no.1
• /
• pp.11-20
• /
• 2014

In this paper, we analyze the performance and reliability of the next-generation KRTCS (Korea Radio Train System) network. The KRTCS has been designed to manage and control the overall status of trains including location, speed, stop position, door open/close status and interior monitoring and so forth. System faults of the KRTCS operation can lead to the disruption of smooth train flow, even to terrible traffic accident. Prior to installation we need to assure the reliability of the designed KRTCS system. For this purpose, we simulated and analyzed the KRTCS network using QualNet simulator, assuming the various environmental operation data of train flows and communication faults that can be found in real telecommunication networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3115-3120
• /
• 2009

An electric point-machine which changes over a turnout so that it enables a train to be operated in the routine that a train is to proceed has been installed and used in most of the railways such as not only urban railways but also main-line railways. Most of the maintenance works in this electric point-machine is that the maintenance workers manually measure motor power, control power and display power in the site with the use of portable counters. Especially in case of NS or NS-AM electric point machine, the maintenance cycle is so frequent that during the operation casualty accidents caused by carelessness occurs as well as more staff is required for this measurement. In this paper we propose a system for monitoring the state of electric point machine installed in the site to improve maintenance efficiency and it is expected that this monitoring system confirms any measured values on electric point machines in real-time and improves maintenance efficiency.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.695-703
• /
• 2018

Based on monitoring data collected from the Nanjing Dashengguan Bridge over the last five years, this paper systematically investigates the effects of temperature field and train loadings on the structural responses of this long-span high-speed railway bridge, and establishes the early warning thresholds for various structural responses. Then, some lessons drawn from the structural health monitoring system of this bridge are summarized. The main context includes: (1) Polynomial regression models are established for monitoring temperature effects on modal frequencies of the main girder and hangers, longitudinal displacements of the bearings, and static strains of the truss members; (2) The correlation between structural vibration accelerations and train speeds is investigated, focusing on the resonance characteristics of the bridge at the specific train speeds; (3) With regard to various static and dynamic responses of the bridge, early warning thresholds are established by using mean control chart analysis and probabilistic analysis; (4) Two lessons are drawn from the experiences in the bridge operation, which involves the lacks of the health monitoring for telescopic devices on the beam-end and bolt fractures in key members of the main truss.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.628-633
• /
• 2003

Recently, the electronic circuit with microprocessor based control system instead of conventional analog circuit is widely used for rolling stock, and also these circuits are widely adopted for train control and monitoring in modem rapid transit system. Noise, distortion and attenuation are always present in electronic equipments and strictly limit performance. The purpose of this paper is to propose noise reduction technology for electronic equipments in rolling stock.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.353-362
• /
• 2008

Operation data and fault data are recorded at the TCMS(Train Control and Monitoring System) of train are very important record for repairs and inspection of train. there are two ways to transfer the data today. one is using memory card and the other is using wireless communications. This paper is proposed about TCMS wireless depot analytical equipment that transfers data recorded in train to depot equipment via wireless method. The TCMS wireless depot equipment configuration is an AP(Access Point) and a central server PC at depot equipment. This method has the advantage of decrease of personnel expenses, collection time and convenience of staffs. This paper is verified about the utility of use, efficient establishment position of an AP at depot, the safety of data receiving, the exactitude of data and the shortening of transmission time. and this equipment is now operating at shin-jeong depot of SeoulMetro.